Description
The SFP transceiver is high performance, cost effective module supporting dual data-rate of 1.25Gbps/1.0625Gbps and from 10km to 20km transmission distance with SMF.
The transceiver consists of two sections: The transmitter section incorporates a FP laser. And the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). All modules satisfy class I laser safety requirements.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver.
The standard serial ID information compatible with SFP MSA describes the transceiver¡¯s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM
protocol. For further information, please refer to SFP Multi-Source Agreement (MSA).
The SFP transceivers are compatible with RoHS.
3x4x8 cm.
Fiber media converter.
Fiber Media Converter Fiber Patch cord Optical Transceiver(SFP.GBIC.BIDI SFP , CWDM) Fiber Adapter Fiber Attenuator Fiber video converter/PDH converter
1.25G GLC-LH-SM Optical Transceiver. Dualfiber Singlmode 1310nm 10KM Features Dual data-rate of 1.25Gbps operation 1310nm FP laser and PIN photodetector for 10KM transmission Compliant with SFP MSA and SFP-LH-SM with duplex LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with RoHS +3.3V single power supply Operating case temperature: Standard : 0 to +70ípC Industrial : -40 to +85ípC Applications Gigabit Ethernet Fiber Channel Switch to Switch interface Switched backplane applications Outer/server interface Other optical transmission systems Standard export package
With the adequate production capacity and total quality management, a wide variety of sfp transceivers are available with different rates(155m, 1.25g, 2.125g, 2.5g and 4.25g) and transmission distance(from 550m to 120km). Details about one modle of atop's sfp transceiver here. Ap-s31121-3cl20 1.25 gb/s rohs compliant long-wavelength Pluggable sfp transceiver Product features Upto 1.25gb/s duplex data links Hot-pluggable sfp footprint 1310nm fabry-perot laser transmitter Duplex lc connector Rohs compliant and lead free Upto 20 km on 9/125 Metal enclosure for lower emi Single 3.3v power supply Low power dissipation
With the adequate production capacity and total quality management,a wide variety of CWDM SFP transceivers and CWDM xfp transceivers are available with different rates (1.25G and 2.5G ) and transmission distance(from 40km to 120km). Details about one modle of ATOP's CWDM SFP transceiver here. AP-SC49125-3CxL80 1.25 Gb/s RoHS Compliant CWDM Pluggable SFP Transceiver Product features Up to 1.25Gb/s bi-directional data links Hot-pluggable SFP footprint Uncooled DFB laser transmitter in 8 possible CWDM wavelengths Duplex LC connector RoHS compliant and Lead Free Up to 80 km on 9/125 Metal enclosure for lower EMI Single 3.3V power supply Low power dissipation
Tx-1310/rx-1490 nm single-mode bi-directional Sfp simplex connector 155 mbps sonet oc-3/sdh stm-1/125 mbps fast ethernet Features: Compliant with sonet/sdh standard Compliant with fast ethernet standard Industry standard small form pluggable (sfp) Package: Simplex lc connector Differential lvpecl inputs and outputs Single power supply 3.3v Ttl signal detect indicator Hot pluggable Class 1 laser product complies with en 60825-1
CWDM-SFP
Features 1) dual wavelength bi-directional tx/rx 2) single sc/pc receptacle optical interface compliant 3) 1250 mb/s symmetrical tx/rx data rate 4) 1490 nm cw mode dfb laser transmitter 5) 1310 nm apd/tia burst mode receiver 6) digital burst rssi function 7) single 3.3voltdcsupply 8) sfp package outline 9) hot-pluggable 10) 0 to 70 oc operation Applications Gigabit ethernet passive optical networks olt side Fiber to the home, curb, office (fttx) Point to multi point service (p2mp) Notes: 1. Tx fault is an open collector output, which should be pulled up with a 4.7k~10kî© resistor on the host board to a voltage between 2.0v and vcc+0.3v. Logic 0 indicates normal operation; logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to 0.8v
10G SFP+ TO SFP+ DAC Series Product Model: ESDPX-330CNxx Data Rate: 10G Fiber Type: 30~24#Cable Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package or 10pc/package Features 1.Support multi-gigabit data rates up to 10.5Gbps 2.Support 1x, 2x, 4x and 8x Fiber Channel data rates 3.Hot-pluggable SFP 20PIN footprint 4.Serial ID module on MOD(0-2) 5.AC coupling of PECL signals 6.EMI/EMC performance 7.Low Power Consumption < 0.5W 8.Power Supply :+3.3V 9.Compliant to SFP+ MSA 10.Temperature Range: 0~ 70 �°C 11.ROHS Compliance. Applications 1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface; 2.Switched backplane applications/Router/Server interface; 3.Other optical transmission systems
