Single Row Long Cylindrical Roller Bearing

No.: nu6/241.3m Old no.£º32948h Dimension£¨mm£©£º241.3¡á374.65¡á127 Basic£¨kn£©£ºc, 1260£¬co, 2660 Mass£¨kg£©£º56.2.

This type bearing has a very high radial load capacity but no axial load capacity. With relative smaller radial measurements, it gives a higher limiting speed. Fc type has two outer rings with ribs, full set of outer ring(ourter ring, rollers and cages), and one inner ring. Cages are rib-type. Fcd type has two outer rings with ribs, full set of outer ring(ourter ring, rollers and cages), and two inner rings. Cages are rib-type. Fcdp type has two outer rings without ribs, full set of rollers and cages, two inner rings, two rib rings and one middle snap rib ring, Cages are pin-type. In the view of position of lubricating bore, they have following types Fc: the sides of outer ring have lubricating groove Fc/a1: the radial surface has lubricating groove and oil bore¡£ Fcd: the sides of outer ring have lubricating groove. Fcd/a1:the radial surface of outer ring has lubricating groove and oil bore. Fcd/a13:both the sides and radial surfaces have lubricating groove and oil bore. Fcdp:the radial surfaces of both outer ring and middle rib ring have lubricating groove and oil bore. 80x80x80cm

Part number Jp12049/jp12010 Hm124646-ass90085 Hm127446-ass90093 Hm129848/hm 129814 Hm133444-90107 Jp14049/10 161400/ee161850 L163149-90051 L183448/10 L183449/10 Hh221430/221410 Hh221442/hh221410 Hh221449/hh221410 Hh224340/224310 M224748/m224710 Ll225749/ll225710 L225810 / l 225849 Hh228340/310 Hh228349/hh228310 Hm231132/hm231110 Hm231149 90096 M231649/10 Hh234048/hh234010 M236849/m236810 Hm237545/10 H238148/h238110 M238849/m238810 Hm231149/hm231110 M236845/m236810 H239640/h239610 Lm241149/lm241110 M241547/10 242649/242610 M244249/10 Ll244549/ll244510

Four-row cylindrical roller bearing fc202780, 100x135x80mm Why esg bearings? Quality advantages: 1. Good quality bearing steel; 2. Advanced heat treatment technique to enable high and even hardness and toughness; 3. High temperature back-fire stabilizes the bearing size; 4. P6 precision grade; ller bearings: Standard export packing

Part name: three-row cylindrical roller slewing bearing Part no.: 191.32.3855.000.41.1522 O.D. = 4136.4mm I.D. = 3658mm T = 200mm Module: 18 Nos of teeth: 227. Total weight: 2700kg.

Single row tapered roller bearings are able to harness both radial and axial forces. The axial load capacity depends on the degree of the contact angle. These parts are able to control the axial load in one direction only and that is wht they are assembled in pairs. The axial clearance or preload designated in these pairs of bearings is to be adjusted during assembly. The amount of the axial clearance or preload is determined according to the following criteria: operating conditions, the size and type of the roller beaings, and the specific requirements of the mating arrangements rigidity.