- To control various temperature (-30 centigrade- +30 centigrade) accurately during industrial production or A/C.
- The series chiller have manufacturing experience for about twenty years, Install an usage simple, support in brief.
- According the requirement, in the same unit, there are more than two independent refrigeration loops.
- Refrigerant: R-22 (can choose R407C/R134a/R410a)
- According the demand of the consumer, it can supply nonstandard unit.
- Water cooled and air cooled specification is well-found (power: 1/2-500HP)
Industrial Screw Chiller H.S. CODE : 84198940
Open type High capacity Chilling plants ranging from 5TR to 500TR at +30 C to (-40C) (Brine). Ammonia or Freon Based. Tailor Made Manufacturing. Compressor: Reciprocating or Screw. Chiller/ Evaporator: Shell & Tube or BPHE/ WPHE These are Fully Auto PLC Panel controlled with VFD.
Industrial Chillers Manufacturer from Shanghai YiYou The chiller is a kind of cooling water equipment which can supply constant temperature, constant current and constant pressure. Small chiller works is the first way to the machine into a certain amount of water tank, through the small chiller cooling system will be water cooling, and then by the pump will be low-temperature cooling water into the equipment to be cooled, small chillers chilled water After the temperature rise and then back to the tank, to achieve the role of cooling. Cooling water temperature can be adjusted automatically according to the requirements, long-term use can save water.
The new IPT air-cooled chillers, specifically designed for use in industrial applications, are compact units equipped, as standard, with an internal storage tank and pump, offering a tried and tested solution that has received worldwide acclaim. â??IPTâ?? chillers guarantee energy efficiency levels at the top of the category. Available Series: IPT, PST, SLT, OLT, OLS
Screw Chiller adopt the best (semi-hermetic) screw compressor from abroad, and operate credibility, high efficiency, easy to maintain, exact volume control, a wide range of application. The system adopts the latest asymmetric rotor profile. Build-in pressure drop lubricant to system with low vibrations, sound emissionshigh sealing performance. Screw Chiller's human machine interface configures a full touch screen, which enables automatic control and accurate monitoring. The advantages of unit: waterproofdustproof, corrosion resistant, long life. Step or stepless capacity control, the unit ensure that it bring into the most energy-saving effective in any load conditions. Screw Chiller due to use heat copper tube and high efficiency compressor with high effective thermal expansion current-saving device, the unit will operate in stability, longer and effectively. Screw Chiller adopts a reliable safety protection device: to prevent compressor starting frequently, over-current protection, overheat of motor protection, prevent freezing, sight glass in liquid, oil heating protection, phase protection, HV/LV protection, discharge high-temperature protection, safety value, soluble clock, water shut-off protection, and so on. 1. Cooling capacity: 126.2kw~2285.4kw 2. liquid inlet temperature is 12 degrees, outlet temperature is 7 degrees. 3. Cooling water inlet temperature 30 degrees,outlet temperature 35 degrees. 4. Input power: 3P-380V-50Hz, Allowable fluctuate voltage: ± 10%, allowable voltage difference in phase: ± 2%. ( 3P-415V-60HZ and 3P-230V-60HZ is ok) 5. Accept orders for special requirements. 6. Industrial and durable design, with stainless steel water tank and high-lift pumps. 7. Wide range of variable chilled water temperature to meet the industrial requirements throughout whole year. 8. Designed as an independent refrigeration circuit, each compressor corresponding to one refrigeration circuit. 9. Refrigerant use R22 or Friendly choose to use environmentally R404A or R134A refrigerant. 10.COP over than 4.02 11.Guarantee for 1Year
Circulation bath , Heated & Cooled circulation systems , Jacketed chiller , Industrial chiller for reactor or Distillation units. Dynamic cooling and heating for fluid substance process.
Industrial chillers water cooled 1.Standard and customer specified 2.Cooling units with open system 3.Chillers: close system, compressor cooling 4.Split arrangement, compact units 5.Water or air cooled 6.Execution with different heat transfer media 7.With or without energy saving free cooling system 8.Operating temperature -50ípC to 60ípC 9.Capacity for heating/cooling up to 3000 kW Option: 1.Free cooling, compact- or split design, PLC 2.Water analysis/water treatment, layout for demineralized water or ultra pure water possible, with or without monitoring of Ionization 3.Finish in different qualities of stainless steel piping Application : Process engineering, plastic-, rubber- and glass industry Standard wooden case
Air Chiller Model :RO-8A Parameters: 1.Cooling capacity:18748kcal/h,21.8KW 2.Power Supply:3PH/380/50Hz 3.Compressor Power;3KW2 4.Outlet Pipe Size:150mm 5.Temperature Control Range:15-23íµ 6.Fan Power:1.5KW 7.Wind Speed:12M/S 8.Air Volume:2500 m3/h 9.Air Pressure:300PA 10.Running Current:16A 11.Total Power:7.6KW 12.Dimension:L1300 mmW750 mmH1700mm. Wooden case
Water Chiller Model : RO-3W Parameters: 1.Cooling capacity(kw):9.5 2.The Rate Of Cold Water (m3/h):1.65 3.Water Tank(m3):0.038 4.Compressor Power(KW):2.25 5.The Rate Of Cooling Water(m3/h):2.06 6.Power Supply:3phase-380/415V-50/60Hz 7.Refrigeration:R22/R134A/R407C 8.Dimension LWH(mm):1860*540*930 9.Weight(KG):120. Wooden case.
