Water Chiller Model : RO-3W
Parameters:
1.Cooling capacity(kw):9.5
2.The Rate Of Cold Water (m3/h):1.65
3.Water Tank(m3):0.038
4.Compressor Power(KW):2.25
5.The Rate Of Cooling Water(m3/h):2.06
6.Power Supply:3phase-380/415V-50/60Hz
7.Refrigeration:R22/R134A/R407C
8.Dimension LWH(mm):1860*540*930
9.Weight(KG):120.
Wooden case.
Industrial chillers water cooled 1.Standard and customer specified 2.Cooling units with open system 3.Chillers: close system, compressor cooling 4.Split arrangement, compact units 5.Water or air cooled 6.Execution with different heat transfer media 7.With or without energy saving free cooling system 8.Operating temperature -50ípC to 60ípC 9.Capacity for heating/cooling up to 3000 kW Option: 1.Free cooling, compact- or split design, PLC 2.Water analysis/water treatment, layout for demineralized water or ultra pure water possible, with or without monitoring of Ionization 3.Finish in different qualities of stainless steel piping Application : Process engineering, plastic-, rubber- and glass industry Standard wooden case
Product features: 1. High Efficiency The units can be equipped with heat recovery. If using as air-conditioning, the recovery heat will be 30% -80% of the total cooling capacity. The temperature of hot water can reach 70 degrees. While using recovery heat the unit efficiency can be increased 5%. 2. Running stable It has 7 safe protection functions to ensure the unit running normally. With double compressors installed, if one compressor malfunction, the other compressor will keep working properly. 3. Intelligent management Visual touch screen control system makes operation very easy. timely feedback for various of malfunction information. The control system can be connected with users central control system, then customers can monitor the running status of the unit at any time. 4. Easy installation and maintenance The units are filled with refrigerant and lubricant before delivery, customers only need to connect the inlet pipe, outlet pipe and power to run. The control interface directly display the malfunction contents, its much easier for customers to know and sort out problems. 5. Various of refrigerant to meet customers specific requirements. Refrigerant: R22.R407CR134a. are optional
As a leading water-cooled screw chiller manufacturer with almost 20 years of experience since 2003, TopChiller provides a complete range of water-cooled screw chiller from TPWS-WSH series. The cooling capacity of screw water chiller is from 30Ton to 480Ton/105KW to 1688KW and the chiller temperature control range from +30 to -30. Besides the standard water-cooled screw chiller control temperature from 7 to 30, TopChiller also has a water-cooled glycol screw chiller control temperature below zero from 0 to -30 for some special industrial applications. With 20 years experience in design and manufacturing water-cooled screw chiller from TopChiller has the following features: Using famous brand Semi-hermetic Screw Compressor- Bitzer from Germany and Handbell from Taiwan. Each screw compressor comes with 4 steps of energy control 0-25%-50%-75%-100% to make sure the whole screw chiller operates when stable with high refrigeration performance. Each water-cooled screw chiller with high-efficiency shell and tube type heat exchanger and aluminum foil with a copper tube air cooled condenser.
PRODUCT NAME: Honeycomb Dehumidifier MODEL NO.: AMD-30H AMD-50H AMD-80H AMD-120H AMD-150H AMD-200H AMD-300H AMD-400H AMD-500H AMD-700H AMD-1000H AMD-1500H AMD-2000H AMD-3000H AMD-4000H
PRODUCT NAME: Self-contained Vacuum Autoloader (Single-phase) MODEL NO.: AM-300G The Feeding & Coveying series include: Vacuum Autoloader, Separate Vacuum Hopper Loader, Self-contained Vacuum Autoloader, Euro-type Hopper Loader, Separate Vacuum Autoloader, High Capacity Vacuum Hopper Loader etc. Welcome to contact us to know more. Note� 1) The test condition of conveying capacity: vertical distance 4 meters, horizontal distance 1 meter. 2) The standard power voltage for AML-300G is 1 220V 50/60Hz. Application: AML-300G combined autoloader adopt single phase carbon brush motor with superior suction power and easy installation. It is particularly suitable for conveying new materials. Features: * Stainless steel hopper and motor overload protective device. * AML-300G. is equipped with High-speed carbon-brush motor with strong suction force. * Microprocessor controller for ease of operation and has multiple alarm indicators. * Equipped with emote controller for convenient setting and operation
PRODUCT NAME: Separate Vacuum Autoloader (Single-phase) MODEL NO.: AML-700G Note 1) The test condition of conveying capacity: vertical distance 4 meters, horizontal distance 1 meter. 2) The standard power voltage for AML-700G is 1 220V 50/60Hz. Application: AML series separate vacuum hopper loaders are suitable for conveying material over long distance. The machine adopts stainless steel hopper to ensure no contamination to raw material. The machine equipped with high efficiency and high pressure air pump, features light weight, durable and great suction power, easy installation and operation. The Feeding & Coveying series include: Vacuum Autoloader, Separate Vacuum Hopper Loader, Self-contained Vacuum Autoloader, Euro-type Hopper Loader, Separate Vacuum Autoloader, High Capacity Vacuum Hopper Loader etc. Welcome to contact us to know more. Features: Microprocessor controller for ease of operation and has multiple alarm indicators. Motor overload protector ensures long motor lifespan. Audible material shortage alarm. Filter designed for easy cleaning and has filter status checking window for easier monitor of filter condition. Both vacuum hopper and photo sensor hopper can be directly mounted on molding machine's feed port. The above mentioned loaders adopt stainless steel mesh as standard. It is available to select 6L/12L vacuum hopper, both of which can be directly installed on injection molding machine. Proportional valve is available as option, which is adopted to mix virgin and regrind material, as well as instantly recycle regrind material.
PRODUCT NAME: Hopper Dryer MODEL NO.: AMD-12KG AMD-25KG AMD-50KG AMD-75KG AMD-100KG AMD-150KG AMD-200KG AMD-300KG AMD-400KG AMD-600KG Note 1""is standard configuration; "¯" is optional to purchase. 2) The standard power supply is 3 380V 50Hz. Other power supply is available. Application: AMD-KG Series plastic hopper dryers are economic equipment to dry plastic material before molding process. Hopper dryer can dry various plastic material humidified during packing, transportation and recycling. The machines can be installed directly on plastic injection molding machine, blowing molding machine and extruder machine. Aumax® is a supplier of Plastic Granulator, Mold Temperature Controller, Hopper Dryer, Industrial Water Chiller, Air-cooled Industrial Water Chiller, Powerful Granulator, Vacuum Autoloader etc. Welcome to contact us to know more. Features: Compact structure with nice appearance. High accuracy temperature controller, easy to operate. High efficiency fans with high performance and long life. Stainless steel hopper keep material without pollution. Transparent window to check material storage. Separate designed structure, easy to clean and change material. Magnet grid and magnetic base is optional for purchasing. A type and L type floor stand frame and suction box are optional. Cyclone dust separator, exhaust air filter, hot air recycler are optional.
A water-cooled chiller is one of the types of chillers that removes heat from it to cool the water used in projects or industrial or domestic structures and re-enters the water into the operation cycle. In fact, chillers transfer heat from a space that needs temperature control and transfer it to another space.
Supplier: Ethanol /alcohol process line/machine,ethanol/alcohol turnkey project , industry fruit process machine/production line ,industry vegetable process machine/production line, industry noodle machine/production line , industry bread/cake machine/process line and so on . industry waste water treatment system process line .packing machine
Services: Our company's products, technical support, training, installation and commissioning