Screw Chiller adopt the best (semi-hermetic) screw compressor from abroad, and operate credibility, high efficiency, easy to maintain, exact volume control, a wide range of application. The system adopts the latest asymmetric rotor profile. Build-in pressure drop lubricant to system with low vibrations, sound emissionshigh sealing performance. Screw Chiller's human machine interface configures a full touch screen, which enables automatic control and accurate monitoring. The advantages of unit: waterproofdustproof, corrosion resistant, long life. Step or stepless capacity control, the unit ensure that it bring into the most energy-saving effective in any load conditions. Screw Chiller due to use heat copper tube and high efficiency compressor with high effective thermal expansion current-saving device, the unit will operate in stability, longer and effectively. Screw Chiller adopts a reliable safety protection device: to prevent compressor starting frequently, over-current protection, overheat of motor protection, prevent freezing, sight glass in liquid, oil heating protection, phase protection, HV/LV protection, discharge high-temperature protection, safety value, soluble clock, water shut-off protection, and so on. 1. Cooling capacity: 126.2kw~2285.4kw 2. liquid inlet temperature is 12 degrees, outlet temperature is 7 degrees. 3. Cooling water inlet temperature 30 degrees,outlet temperature 35 degrees. 4. Input power: 3P-380V-50Hz, Allowable fluctuate voltage: ± 10%, allowable voltage difference in phase: ± 2%. ( 3P-415V-60HZ and 3P-230V-60HZ is ok) 5. Accept orders for special requirements. 6. Industrial and durable design, with stainless steel water tank and high-lift pumps. 7. Wide range of variable chilled water temperature to meet the industrial requirements throughout whole year. 8. Designed as an independent refrigeration circuit, each compressor corresponding to one refrigeration circuit. 9. Refrigerant use R22 or Friendly choose to use environmentally R404A or R134A refrigerant. 10.COP over than 4.02 11.Guarantee for 1Year
Product features: 1. High Efficiency The units can be equipped with heat recovery. If using as air-conditioning, the recovery heat will be 30% -80% of the total cooling capacity. The temperature of hot water can reach 70 degrees. While using recovery heat the unit efficiency can be increased 5%. 2. Running stable It has 7 safe protection functions to ensure the unit running normally. With double compressors installed, if one compressor malfunction, the other compressor will keep working properly. 3. Intelligent management Visual touch screen control system makes operation very easy. timely feedback for various of malfunction information. The control system can be connected with users central control system, then customers can monitor the running status of the unit at any time. 4. Easy installation and maintenance The units are filled with refrigerant and lubricant before delivery, customers only need to connect the inlet pipe, outlet pipe and power to run. The control interface directly display the malfunction contents, its much easier for customers to know and sort out problems. 5. Various of refrigerant to meet customers specific requirements. Refrigerant: R22.R407CR134a. are optional
Industrial Screw Chiller H.S. CODE : 84198940
Supplier: Water chiller, screw chiller, industrial refrigeration
Item Unit model AGS-060WSL Refrigerant -10degree kW 94.1 -20degree 64.2 -30degree 40.1 Power 3φ 380V 50Hz Total input power kW 45.4 Compressor Type Semi hermetic screw Power kw 45.4 Refrigerant R22/R404A Start-up model Y-Triangle Evaporator Type Shell and Tube Chilled fluid flow m³ /h 29.5 Condenser Type Shell and Tube Cooling water flow m³ /h 23.9 Inlet/outlet pipe diameter Evaporator Inch 3" Condenser Inch 3" Drain out port Inch 1" Dimension Length(L) mm 2130 Width (W) mm 855 Height(H) mm 1540 Weight Net weight kg 950 Running weight kg 1060 Note: 1. Nominal cooling capacity calculated according to: The chilled fluid is the 60% Ethylene Glycol aqueous solutions. Inlet/outlet cooling water temperature: 32degree/37degree 2. Working condition: The temperature range of chilled fluid is from -5degree to -30degree Temperature difference between inlet and outlet chilled fluid is from 2.5degree to 10degree The temperature range of cooling water from 22degree to 37degree Temperature difference between inlet and outlet cooling water is from 3.5degree to 10degree.
1.Cooling capacity is from 1.5kw to 2500kw; 2.Copeland, daikin, sanyo compressors; 3.Schneider electronic parts, italian water pump and steel water-tank-type evaporator; 4.Precisely control water temperature with variation of +/-1c and the temperature ranges from 5c to 50c. 5.Custom units are our specialty.
Open type High capacity Chilling plants ranging from 5TR to 500TR at +30 C to (-40C) (Brine). Ammonia or Freon Based. Tailor Made Manufacturing. Compressor: Reciprocating or Screw. Chiller/ Evaporator: Shell & Tube or BPHE/ WPHE These are Fully Auto PLC Panel controlled with VFD.
Industrial Chillers Manufacturer from Shanghai YiYou The chiller is a kind of cooling water equipment which can supply constant temperature, constant current and constant pressure. Small chiller works is the first way to the machine into a certain amount of water tank, through the small chiller cooling system will be water cooling, and then by the pump will be low-temperature cooling water into the equipment to be cooled, small chillers chilled water After the temperature rise and then back to the tank, to achieve the role of cooling. Cooling water temperature can be adjusted automatically according to the requirements, long-term use can save water.
As a leading water-cooled screw chiller manufacturer with almost 20 years of experience since 2003, TopChiller provides a complete range of water-cooled screw chiller from TPWS-WSH series. The cooling capacity of screw water chiller is from 30Ton to 480Ton/105KW to 1688KW and the chiller temperature control range from +30 to -30. Besides the standard water-cooled screw chiller control temperature from 7 to 30, TopChiller also has a water-cooled glycol screw chiller control temperature below zero from 0 to -30 for some special industrial applications. With 20 years experience in design and manufacturing water-cooled screw chiller from TopChiller has the following features: Using famous brand Semi-hermetic Screw Compressor- Bitzer from Germany and Handbell from Taiwan. Each screw compressor comes with 4 steps of energy control 0-25%-50%-75%-100% to make sure the whole screw chiller operates when stable with high refrigeration performance. Each water-cooled screw chiller with high-efficiency shell and tube type heat exchanger and aluminum foil with a copper tube air cooled condenser.
