Sj2500 2Kw Gasoline Generator

Product Model:FGF2500X(E) Model FGF2500X FGF2500XE Rated Frequency (Hz) 50 60 50 60 Rated Voltage (V) 220 110/220 220 110/220 230 115/230 230 115/230 240 120/240 240 120/240 Rated Power (W) 2000 Max Power (W) 2200 Fuel Tank (L/US gal) 15/3.96 L (mm) 590 W (mm) 430 H (mm) 435 Net Weight (kg/lbs) 42/92.61 45/99.22 Engine Type 1-cylinder, 4-stroke, air-cooled, gasoline engine Displacement (ml) 163 Max Engine Power (kw/hr) 3.7/5 Ignition System TCI Starting System Manual Manual/electric Continuous Running Time (hr) 10.5 Lube (L/US gal) 0.6/0.16 Noise (db) 84.

Model: ZH2KW Rated Power: 2000 Watts Maximum Power: ~ 2500 Watts Type: 3 Blade Upwind Rotor Diameter: 3.6 m (12 ft.) Start-up Wind Speed: 2.5 m/s(5.6 mph) Cut-in Wind Speed: 3m/s (6.7mph) Rated Wind Speed: 10 m/s(22mph) Cut-Out Wind Speed: None Furling Wind Speed: 18 m/s (40mph) Max. Design Wind Speed: 50 m/s (112mph) Blade Pitch Control: None, Fixed Pitch Over speed Protection: Auto Furl Gearbox: None, Direct Drive Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F) Generator: Permanent Magnet Alternator Output Form: 48 VDC Nominal . Wooden case.

Gasoline Generator, max power: 2200w

Gasoline generator

Rated power:3kw; frequency 50/60hz; power factor 1. 0; single crock, force air-cooled four-stroke, top-installed gasoline engine Net weight:43(kg) Packing dimension:600 íß 435 íß 445 (mm3)

Gasoline generator Description: 4-stroke ohv engine (overhead valve). Brushless alternator. Transistor controlled ignition (t.C.I.). Low noise design. High quality welded open frame. Electric starter with battery, makes more easy operation. Oil watch warning system; with fuel gauge and voltmeter. 700mmf-530mmf-570mm

Rated output: 2kw Rated frequency: 50/60hz Rated voltage:110/220/230/240/380v Noise level: 70-74 db Packing size: 565x440x470mm Gross weight: 42kgs

Gasoline generator Rated output: 0.65kw Rated voltage:110/220/230/240v Rated frequency: 50/60hz Noise level: 68-70db Packing size: 375x325x330mm Gross weight: 21kgs

1.Magnetic saturation generator design, 20years designed life. 2.2-2.5m/s start-up wind speed under low torque start-up technique. 3.Independent power supply 4.Blades are casted into molding at one time with balance up to 99%. 5.Bearings import from japan (nsk), long service time (5 years maintenance-free). 6.Low cost and low noise 7.Low cut in wind speed (3m/s) to guarantee the maximum generation at low wind speed. One pc in one plywood