1.25G GLC-LH-SM Optical Transceiver.
Dualfiber Singlmode 1310nm 10KM
Features
Dual data-rate of 1.25Gbps operation
1310nm FP laser and PIN photodetector for 10KM transmission
Compliant with SFP MSA and SFP-LH-SM with duplex LC receptacle
Digital Diagnostic Monitoring:
Internal Calibration or External Calibration
Compatible with RoHS
+3.3V single power supply
Operating case temperature:
Standard : 0 to +70ípC
Industrial : -40 to +85ípC
Applications
Gigabit Ethernet
Fiber Channel
Switch to Switch interface
Switched backplane applications
Outer/server interface
Other optical transmission systems
Standard export package
1.25g cwdm-sfp-1490 optical transceiver.
Dualfiber singlemode 1490nm 80km
Features
Dual data-rate of 1.25gbps operation
1490nm cwdm dfb laser and pin photodetector for 80km transmission
Compliant with sfp msa and cwdm-sfp-1490 with duplex lc receptacle
Digital diagnostic monitoring:
Internal calibration or external calibration
Compatible with rohs
+3.3v single power supply
Operating case temperature:
Standard : 0 to +70+¼pc
Industrial : -40 to +85+¼pc
Applications
Gigabit ethernet
Fiber channel
Switch to switch interface
Switched backplane applications
Outer/server interface
Other optical transmission systems
Description
The sfp transceivers are high performance, cost effective modules supporting dual data-rate of 1.25gbps and 80km transmission distance with smf.
The transceiver consists of three sections: a cwdm dfb laser transmitter, a pin photodiode integrated with a trans-impedance preamplifier (tia) and mcu control unit. All modules satisfy class i laser safety requirements.
The transceivers are compatible with sfp single-source agreement (msa) .
Information, please refer to sfp msa.
Product name: 10/100m fiber media converter
Dual fiber
Product intro:
The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.
Main features:
Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol.
With the function of automatic recovery to prevent system halt.
Indicate the working status.
Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current.
Optional inside and outside power supply.
No adjust electrical and optical environment.
Led indicator light shows the working performance status.
Duplex mode:
Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol.
Inserting to 14 slots rack with play and plug.
Led status indicator light makes easy diagnosing network and checking troubleshooting.
Good flow control and reset fuction prevent system halt.
Transmission distance:
Mm(multi mode): within 2 km
Sm(single mode):20km, 40km, 60km, 80km, .100km
Environment parameters:
Working temperature: 0íµí½65íµ
Storage temperature: -40íµí½+85íµ
Humidity: 5%í½90%
Other parameters:
Inside power supply dimesion: 160mm*110mm*30mm
Outside power supply dimesion: 110mm*70mm*30mm
Rated voltage: ac220v/50hz
Inside power supply: ac 220v/1a
Inside power supply: dc 5v/1a
Product name: 10/100m fiber media converter
Single fiber
Product intro:
The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.
Main features:
Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol.
With the function of automatic recovery to prevent system halt.
Indicate the working status.
Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current.
Optional inside and outside power supply.
No adjust electrical and optical environment.
Led indicator light shows the working performance status.
Duplex mode:
Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol.
Inserting to 14 slots rack with play and plug.
Led status indicator light makes easy diagnosing network and checking troubleshooting.
Good flow control and reset fuction prevent system halt.
Transmission distance:
Mm(multi mode): within 2 km
Sm(single mode):20km, 40km, 60km, 80km, .100km
Single fiber 1310/1550 wdm
Environment parameters:
Working temperature: 0íµí½65íµ
Storage temperature: -40íµí½+85íµ
Humidity: 5%í½90%
Other parameters:
Inside power supply dimesion: 160mm*110mm*30mm
Outside power supply dimesion: 110mm*70mm*30mm
Rated voltage: ac220v/50hz
Inside power supply: ac 220v/1a
Inside power supply: dc 5v/1a
Scunoe video digital fiber converter transceivers can simultaneously transmit 1-64 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / ethernet /telephone / dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in alications where the cameras have p/t/z capabilities. Plug and play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. Led indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation , which is suitable for different working environment .
Product characteristics
1. 8-bit digitally encoded and non-compression video transmission
2. Directly compatible with ntsc, pal, and secam cctv camera systems and support rs-232, rs-422, and rs-485 data protocols
3. Support any high-resolution video signal
4. Automatic compatible pal, ntsc and secam video system
5. Power supply and other parameter state indication, which can monitor the operation condition of system
6. Support no-damage regenerative trunk of video
7. Constant input optical power, and large dynamic range , no electrical or optical adjustments required .
8. Special asic design .
9. Industry-grade of operating temperature from -10 to 75 , which is alied to the different working environment
10. Hot-swap function
11. Stand-alone type or card-type installed in 19í»í» 2u or 4u rack-mount chassis.
Operating voltage: dc5v (we will offer external ower suly from ac96-240v to dc5v for each unit)
Operating temperature: -10 to +75
Storing temperature: -55 to +85
Humidity: 0 to 95% non-condensing
Application :
Intelligent transportation system
Connection of sub-network for surveillance center
Public security surveillance
High way & toll station surveillance
Industrial closed circuit television surveillance
Fiber Media Converter
Fiber Patch cord
Optical Transceiver(SFP.GBIC.BIDI SFP , CWDM)
Fiber Adapter
Fiber Attenuator
Fiber video converter/PDH converter
PLC Splitter LGX Box / Rack
PLC Splitter Module
Blockless PLC Splitter
Bare Fiber PLC Splitter
Rack-mountable PLC Splitter
Scunoe is a professional fiber optical components manufacturer in China.
which is offering a best quality range of Fiber Optic patch cord .
Features: UPC?APC?Simplex / Duplex
Types: SC FC ST LC MTRJ E2000 MU MPO etc
Polishing : UPC , APC
Single Mode , Multi Mode , OM3(10G)
The dia of cable : 0.9mm, 2.0mm, 3.0mm
Multiple option of Optic Cable Core,Simplex,Twin cores,4 Cores,6 Cores,12 Cores,24 Cores, 48 Cores
Return Loss:=50dB(UPC/PC)=65dB(APC)
Insertion Loss : Single mode:PC=0.3dB, UPC=0.2dB, APC=0.2dB, MTRJ=0.5dB; Multi-mode:PC=0.3dB,
Repeatability:=0.2dB
Frequency of Usage:=1000Times
