Transmitters

Differential Transmitter In All Brand Emerson , Rosemount , Honeyweel , F+h , E+h Etc

Pressure Transmitter for Sandvik LH307/LH410

Notice 1. All the supplied products are provided with product certificates and instructions, including product number, technical parameters, wiring diagram,factory date, etc. Please check carefully to avoid misuse. 2. Installation should check whether the field interface is connected to the product according to the connection mode and thread type of the product.The mouth is the same. If it is a threaded interface, it should be tightened slowly and sealed carefully. Torque can not be added directly to the transmitter shell, but only on the six sides of the pressure interface. 3. The wiring should be strictly in accordance with the instructions of our company. 4.This product is a precise instrument. It is forbidden to disassemble, colide,fall,throw hard or punch the drainage hole with a sharp instrument. 5. The transmitter can work by electricity, but the preheating output is stable for 30 seconds. 6. If any abnormality is found in use, the power supply should be turned off, the use should be stopped, the inspection should be carried out, or contact our technical department direct. 7.When transporting and storing, the original packaging should be restored and stored in a cool, dry and ventilated warehouse. 8.The quality assurance period is 12 months. Intelligent Operation Method 1. LCD shows the output percentage or process pressure. Press the S key to select the display percentage or pressure.Press Z key to select pressure unit KPa or Mpa when displaying pressure. 2. Press S+Z key for 8 seconds, then release it at the same time, press Z key to set the zero value; Press the S key set the range. note: this function can only be triggered once an operation. 3. Adjustments to zeros or ranges may cause changes in the displayed options, i.e.The percentage being displayed becomes pressure or KPa becomes Mpa, etc. All these changes are shown only in the display, and have no effect on the internal parameters of the transmitter, pressure detection and current output. After adjusting the zero point and range, the S and Z keys can be used to select the desired percentage or pressure. 4. Zero-setting in field pressure-free state: 30 seconds after pressing S+Z key, the display shows zero time at the same time release the two keys, that is, zero. Simulated operation method 1.Zero-setting in pressure-free condition: The potentiometer with the word "zero" on the circuit board is adjusted to zero when it is displayed on the spot.(Note: Clockwise increase, counterclockwise decrease) 2.The potentiometer marked "range" on the circuit board can not be adjusted without standard pressure, so as to avoid the disorder of measurement range.

General Description The series of pressure transducers use imported high-quality pressure sensors and special integrated modules, through fine temperature, zero, full range, and non-linear compensation to achieve accurate measurement and transmission of pressure changes in liquid, gas, steam and other media. Technical Index Measuring medium: liquid, gas, steam Pressure range: -0.1MPA~0~60MPA Accuracy grade: ±0.2%FS, ±0.5%FS Stability: â?¤0.2%FS/year Temperature drift: â?¤0.02%FS/(range 0~70) Environment temperature: -20+85 Storage temperature: -20+85 Output signal: 4-20mA or 1-5VDC Supply voltage: 12-40VDC Allow overload: two times the quota voltage Explosiveproof grade: intrinsically safeia II C T6 flameproof dII C T6 Wetware material: 316 stainless steel and 1Gr18Ni9Ti Shell material: die casting alloy aluminum,surface epoxy spraying Pressure interface: M20X1.5 Weight: ordinary 0.75kg, with on-site instructions 1kg Structure Type x1 Connection x2x31 x4 The link mode and output signal of the compact tranmitter are as follows: Two-wire system: 1 Positive power supply 2 Negative power supply 3 Empty 4 Shell Three wire system: 1 positive power supply 2 Negative power supply (Negative sharing with signals) 3 Signal+ 4 Shell x5 The connection mode of aviation plug transmitter is as follows: Two-wire system(direct outlet type) 1 Red wire connection positive power supply 2 Black wire connection negative power supply Notice 1. All the supplied products are provided with product certificates and instructions, including product number, technical parameters, wiring diagram,factory date, etc. Please check carefully to avoid misuse. 2. Installation should check whether the field interface is connected to the product according to the connection mode and thread type of the product.The mouth is the same. If it is a threaded interface, it should be tightened slowly and sealed carefully. Torque can not be added directly to the transmitter shell, but only on the six sides of the pressure interface. 3. The wiring should be strictly in accordance with the instructions of our company. 4.This product is a precise instrument. It is forbidden to disassemble, colide,fall,throw hard or punch the drainage hole with a sharp instrument. 5. The transmitter can work by electricity, but the preheating output is stable for 30 seconds. 6. If any abnormality is found in use, the power supply should be turned off, the use should be stopped, the inspection should be carried out, or contact our technical department direct. 7.When transporting and storing, the original packaging should be restored and stored in a cool, dry and ventilated warehouse. 8.The quality assurance period is 12 months.

Rosemount metric style rtds are highly linear and have a stable resistance versus temperature relationship. These temperature sensors are used primarily in industrial environments where high accuracy, durability, and long-term stability are required. Enhanced performance and optimal temperature measurement accuracy is available for series 65 pt100 temperature sensors coupled with a range of smart temperature transmitters through calibration schedules and callendar van dusen constants. A sanitary offering is also included through the 65q model, offering sanitary process connections, polished sst connection heads, and greater response time. Every metric style rtd is part of our global network ensuring a globally consistent, high quality product every time. According to the standard model

Transmitters are generally head mounted and fitted in the head of temperature sensor; Isolators provide further isolation of field signal so that PLC side is isolated from field side. In the field, many signals are generated such as motor current, armature voltage, position feedback in the form of change in resistance or signals obtained from various types of traducers in standard voltage or current form. These signals are not isolated from input and not suitable for transmission over long distance. Converters are specially developed to overcome these problems in transmission such as line drop, interference, ground looping and non compatibility to standard processing unit. Salient features: 1) Complete galvanic isolation between input, output and control supply 2) Independent zero and span adjustments 3) Stable current output eliminates need for special cable, shielding The isolators are housed in din rail mounting engineering plastic enclosure; special robust cast Al. enclosures suitable for field mounting are also available. APPLICATIONS: These converters are extensively used in cement, fertilizer, chemical, and processing plants. Following models are available: SC I I I D: Signal Converter, Din Rail Mounting, 4-20 mA I/P, 4-20 mA O/P ST N2 P I: Temperature Transmitter, Head Mounting, RTD I/P, 4-20 mA O/P, Loop powered. _ Individual packing.

Detail: pro-class:Optical Transmitter Pro-id:SYD8600-II Reliable optical output Laser thermoelectricity refrigerator Temperature-controlled circuit Mirco CPU control laser working state The micro-processor software provide the Function of digital indicating Error warning Network control Remote control.

FM Transmitter 100 56x28x38 10.2KG 11KG

591p/1200/500/0011 591p/1200/690/0011 591p/1700/500/0011 591p/1700/690/0011 590p-drv/0015/500/0011 590p-drv/0035/500/0011 590p-drv/0040/500/0011 590p-drv/0070/500/0011 590p-drv/0110/500/0011 590p-drv/0165/500/0011 591p-drv/0015/500/0011 591p-drv/0035/500/0011 591p-drv/0040/500/0011 591p-drv/0070/500/0011 591p-drv/0110/500/0011 591p-drv/0165/500/0011 590c/0350 590c/0700 590c/1100 590c/1500 590c/1800 590c/2700 590c/3600 590c/4500 590c/7200 590c/8000 option 24 591c/0350 591c/0700 591c/1100 591c/1500 591c/1800 591c/2700 591c/3600