Px-Production Line Ii

Dy-hal-i/ii and dy-hal-iii/iv are hand-push airless cold solvent traffic lines marking machine, mainly used for small scale road line marking such as the zebra crossing marking, stop line, sports line, special letters and arrow mark, etc.
1. Firm welded frame chassis, is chrome-plated or corrosion resistant coating sprayed. Equipped with imported high-speed bearing, the whole machine is much lighter and more convenient.
2. Front wheel directional device can lock the front wheel to ensure the road-marking machine move freely in striping straight lines and turnings marking.
3. Adjustable guide rod can be freely adjusted up, down, to the left or right.
4. Equipped with high light warning lights makes the night working convenient. The flicker frequency can be freely adjusted, which greatly improved the safety of the marking work.
5. The new-type diaphragm type high pressure airless paint pump is with big flow and stable pressure.
6. Paint tank is with a build-in filter device and air in-take filter in the feeding port.
7. New-type manual spraying guns with reverse washed nozzle can make the road paint on-spot discharging easy and convenient.

1600*1200*1500mm(l*w*h)

scription of mortar production line:
I. This line has simple structure ,flexible production process and low cost.Equipments on this line are easily repaired and replaced.
II. The raw materials for mortar are mainly sand,cement,flyash and limestone.They are very cheap, thus,give more additive value to mortar.Over all,this line is of high profit and is the best choice for investors.
Models of mortar production line:
Type Model Mixer/KW Capacity T/Need area/m*m

FRQ:
1.How many kinds of mortar can this line produce?
A: There are more than 16 kinds of mortar and this line can produce about five of them. If you want to produce even more,we can also offer.
2.How many person needed in this line?
A: 3-5 workers will be enough to operate this line.
3.Is the line full-automatic?
A: Yes,we can custom as your need.
4.Whats the difference between full-automatic line and semi-automatic line?
A:(1)Sem-automatic line need manual help to upload materials,while full-automatic line need not.
(2)semi-automatic line may not need material silos,full-automatic line need.
(3)Semi-automatic line is relatively cheaper than full-automatic line.
5. Is it including packing machine?
A: Yes.
6. How many types of mortar production line is there? What¡¯s the difference?
A:(1)Normally,three. Vertical type ,block type and workshop type.
(2)Normally: vertical type:the height of this line is big more investment of steel supporting structure
Block type: more factory area less steel supporting structure
Workshop type: install in a workshop and the height should be low
7.What is factory area needed?.
A: It depends on the line type. 20-200m*m will be enough
8.Is it only dry or can make wet also?
A:This line is most suitable for dry mortar and can mix wet mortar with 16% moisture.
9.What¡¯s the total power consumption (KW)?
A:It is about 50KW. It is widely depends on the capacity and number of raw materials.
10 What¡¯t the capacity of the line?
A:2-50ton per hour.
11.What¡¯s the guarantee period?
A:12 months. With in this 12 months we take care of all the problems occurred, after that we offer repair and maintain service.
12.Can you install in my country?
A:Yes, we offer oversea installation service.
13:Can you teach us how to operate this line?
A:Yes.We offer training service free of charge.
14:What¡¯s the delivery date?
A:30 days.
15: Whats the payment term?
A:TT and L/C.
16.Can you delivery to my port?
A:Yes,no problem.
17:How can I inspect the line before shipment?
A:You can inspect by yourself or you fine someone inspect for you.
Materials for mortar:
1.Cementing material: cement, lime, plaster.
2.Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite.
3.Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc.
4.Water-retention and thickening material.
5.Chemical additives.
Production process:
1.Raw material storage
2.Raw material convey and weigh
3.Addition and weighing of additive
4.materials mixing
5.finished mortar storage and packing
6.Other device: dust collection system+air compressor system+PLC electric controlling system+steel supporting system

Wood case

Detailed product description:
Mini wheel loader
CE Certification
Rated load: 800kg
Engine: Weichai,Xinchai,Changchai
Strong ablity to overcome obstace.

1) CE Certification
2) Rated load:800kg
3) Engine:Weichai, Xinchai,Changchai ;
4) Strong ablity to overcome obstace

Specifications of ZL08B Wheel Loader:
1.0 Engine Details:
(1) Model: Changcai L24
(2) Engine type: In-line arrangement, water-cooled, one-cycle diesel Engine
(3) Rated Power: 17KW (23.12 H.P.)
(4) Rated Speed: 2200 r/min (rpm)
(5) Fuel Consumption ratio in standard working condition: 269g/kw.h

2.0 Steering System:
(1) Cycloid full hydraulic steering system: BZZ-80
(2) System Pressure: 10MPa
(3) Steering Cylinder: 76x 63x160
(4) Speed
(a) Forward shift (forward I): 7.19
(b) Forward shift (forward II):3.35
(c) Reverse shift (Reverse I):7.19
(d) Reverse shift (Reverse II): 3.35

3.0 Bucket
(1) Bucket Capacity: 0.4 m3
(2) Bucket width: 1300mm
(3) Bucket type: Heavy-duty bolt on teeth
(4) Max. Breakout Force: 22.5KN
(5) Rated Load: 800kg
(6) Operating Weight: 2000kg

4.0 Overall Dimentions:
(1) Overall Length (Bucket on ground position): 4480mm
(2) Overall Height
(a) Ground to Cab Top: 2200mm
(b) Ground to exhaust pipe: It is below from the top of cabin
(c) Dumping Height: 2300mm
(3) Overall Width: 1400mm

5.0 Operating Specifications
(1) Drive Means: Two-wheel drive
(2) Min Turning Radius: 3000mm
(3) Driving System: mechanical
(4) Dumping Reach at max height: 900mm
(5) Min Base to the ground: 220mm
(6) Time of raise: 4.5sec.
(7) Hydraulic cycle time: 8.5sec.

6.0 Brake System
(1) Service Brake: mechanical brake
(2) Parking Brake: Hand operated

7.0 Wheelbas1620mm

8.0 Track1160mm.




1 setin 1*20 gp, 3 sets in 1*40hc.

Detailed product description:
1. Wheel loader.
2. CE Certification, ISO 9001.
3. Longevity.
4. Low cost of ownership.
5. Easy operation

Wheel loader
1) CE or EPA;
2) Engine: Xinchai, Changchai; Weichai
3) Rated loading: from 1T to 5T
4) Bucket capacity: 0.4

Specifications of ZL08F Wheel Loader:

1.0 Engine Details
(1) Model: Changcai L24
(2) Engine type: In-line arrangement, water-cooled, one-cycle diesel Engine
(3) Rated Power: 17KW (23.12 H.P.)
(4) Rated Speed: 2200 r/min (rpm)
(5) Fuel Consumption ratio in standard working condition: 269g/kw.h

2.0 Steering System
(1) Cycloid full hydraulic steering system: BZZ-80
(2) System Pressure: 10MPa
(3) Speed
(a) Forward shift (forward I): 7.19
(b) Forward shift (forward II): 3.35
(c) Reverse shift (Reverse I): 7.19
(d) Reverse shift (Reverse II): 3.35

3.0 Bucket
(1) Bucket Capacity: 0.4 m3
(2) Bucket width: 1300mm
(3) Bucket type: Heavy-duty bolt on teeth
(4) Max. Breakout Force: 28KN
(5) Rated Load: 800kg
(6) Operating Weight: 2350kg

4.0 Overall Dimensions
(1) Overall Length (Bucket on ground position): 4700mm
(2) Overall Height
(a) Ground to Cab Top: 2350mm
(b) Ground to exhaust pipe: It is below from the top of cabin
(3) Overall Width: 1600mm

5.0 Operating Specifications:
(1) Drive Means: Four-wheel drive
(2) Min Turning Radius: 4600mm
(3) Driving System: mechanical
(4) Dumping Reach at max height: 750mm
(5) Min the ground distance: 240mm
(6) Time of raise: 4sec.
(7) Hydraulic cycle time: 9sec.

6.0 Brake System
(1) Service Brake: Four Wheel Hydraulic spread-shoed brake
(2) Parking Brake: Hand operated

7.0 Wheelbase2170mm

8.0 Track 1285mm.


1 set in1*20 gp, 3sets in 1*40hc.

Drilling Rigs:
We supply a full line of drilling rig packages: skid-mounted drilling rigs, truck-mounted drilling rigs and trailer-mounted drilling rigs. Our skid-mounted drilling rigs include diesel electric AC/VFD or DC/SCR drive rigs, mechanical drive rigs, and combination drive rigs, from 1, 000 HP to 6, 000 HP. Our truck-mounted drilling rigs range from 450 HP to 1, 000 HP.

Workover Rigs:
Our product line includes onshore workover rigs, which range from 150 HP to 1, 000 HP. The service depth of our workover rigs usually equipped with Caterpillar diesel engines and Allison transmissions is from 8, 000 ft to 30, 000 ft.

Drilling Equipment:
We sell a full line of API certified drilling rig components including masts, substructures, drawworks, crown blocks, traveling blocks, hooks, hook blocks, swivels, rotary tables, and top drives. The rated load of our AC/VFD drive top drives is from 190 tons to 1, 000 tons.

We have very strong advantage to supply the projects as follow:
i) Rental and sale of drilling/workover rig
ii) Rental and sale of BOP
iii) Sale of part of drilling rig including mast, substructure, drawworks, rotary table, mud pump and accessories
iv) Casing and tubing running service
v) Directional Drilling service
vi) Rental, sale and maintenance of drilling jar
vii) Inspection service
viii) Drilling service
ix) Wireline logging

Specially, we are a project management company hence we can work as a subcontractor to join project or partner with clients in all relevant project if clients need.


Export packing.

ultrafine mill machine has an important application value in the production of nonmetallic ore. The production line of zeolite grinding mill is widely used in the field of processing 200-2500 mesh zeolite powders with high efficiency, low energy consumption and low comprehensive investment cost and become the best choice for zeolite to expand applications and create greater market value. Clirik take scientific and technological innovation as the mission successfully created a number of excellent milling equipment in the field of my manufacturing, to be outstanding enterprises for non-metallic mineral processing. CLIRIK ultrafine mill machine production line prices were in line with market development needs is worth trusting and supporting high-quality equipment.

In fact, the industrial use of zeolite is very rich, there is currently known of more than 50 uses. Zeolites have excellent ion exchange performance, adsorption performance, etc. was deeply loved in the petrochemical industry, chemical industry, light industry production, building materials industry, agricultural production, livestock poultry industry, environmental protection and many other aspects. In order to manufacture efficient, environmentally friendly high-quality zeolite ultrafine mill machine,CLIRIK learn the advanced milling process, increase the intensity of innovation on the basis of the original upgrade and successfully manufactured a new grinding mill which production capacity of 30-40% higher than ordinary mill, unit power consumption savings for more than 40%, is preferred equipment for the processing of 200 mesh high-quality zeolite powder.

[Maximum feed size]: