The advent of the long stroke rolling diaphragm as a means of low-friction dynamic sealing has led to the development of controlair's line of diaphragm air cylinders. These cylinders provide virtually frictionless conversion of pneumatic pressure to linear force. The fact that there is no stiction or blow-by of any kind ensures accuracy, repeatability and sensitivity unheard of from conventional sliding seal air cylinders.
Low-friction dynamic air cylinder: The rolling diaphragm creates the perfect seal for friction free cylinders, air proof, non-lubrication and low-friction, This product is supply the power required in push, promote, fasten, convolution, rotation and linearly motion operating conditions. The super cylinder composed of linear ball bearing and heat-treatmented piston rod.This precision elements can be used in conditions with very strictly sensitivity requirements because its high low-friction feature. Features: Excellent leak tightness, gastight, High-low friction, stationary motion, shockproofness; Hypersensitized even under very little pressure change; Low starting pressure and separating force; Non-lubrication High temperature resistance, high tensile, light weight, erotion control and low cost. Maintenance free, longevity of service, multiple type of products. Applied range: Use in constant tension output high precision equipments. Valve actuator, shock-mitigating device, aerodynamic retarder etc. Tension control system, dancer roll and heat-removal control system. Automation control, drag roll high sensitivity drive control. Factory's equipment with gastight and non-greasy dirt requirements. Body and parts: 6061high-strength aluminum alloy;anodized on surface Piston rod : material:20crmnti , thermal treatment-hard chromium -ground finish -hardness:60-62hrc Rubber diaphragm : butadiene nitrile rubber with filamentary fibre;service life:2million times Linear axletree: thk, myt(japan) Type: lcs59-75-s1-p Cylinder diameter: 59mm Working stroke: 75mm Plastic bag, inner box, master carton
High precision air pressure regulator: T10 is a very higy precision pressure regulator, pressure stability is achieved by a high performance servo-operated control mechanism utilized in the regulator and the pressure supplied to the pneumatic servo amplifier is reduced and held constant. A stainless steel measuring capsule is used as a sensing element to activate the high gain servo balanced control mechanism in which the main valve is controlled by a pilot valve.This allows for greater accuracy and eliminates many of the problems associated with conventional regulators using range springs and diaphragms. Feature: Accurate pressure regulation: control output pressure to within 0.5% accuracy, regulated pressure variation as small as 0.06kpa is self corrected. Satable output: substantial changes in flow have virtually no effect on regulated pressure within 12 scfm. Dependable startup: retuns the regulated pressure to its original output setting even after long í¦down timeí¦. Temperature stability: a stainless steel measuring capsule which activates the servo control, no effects on regulated pressure in wide vaviations operating temperature. Feature data Exhaust capacity: 5 psig (35kpa) above 20 psig (140 kpa) setpointú¼type100hr - 10 scfm (17.0 m3/hr.) (high relief). Sensitivityú¦less than 1/8" (3.2mm) water Mounting options: pipe or panel. Port sizes: 1/4" npt Maximum supply pressure: 1mpa(1050kpa) Main materials: diecast zinc alloy, stainless steel, metal lacquer on body. Weight: 0.63kg Output pressure ranges: 14~500kpa Plastic bag, inner box, master carton
Solenoid valves connectors 8mm sub-micro connectors are made according to din 43650 / iso 4400, en175301-803:2000 forms. The mini and 9.4mm sub-micro connectors are industry standards and are used where rapid installation and service are a must. Both the mini and 9.4mm sub-micro connectors are compatible with din 43650 form. All are used as protective enclosures for electrical connection in conjunction with hydraulic and pneumatic solenoid valves. Connectors offer distinct advantages over "hardwired" solenoid valves because of their modular design. Better than molded construction when special wire is needed or when using one long wire run. General technical data Color: black, gray or translucent for lighted styles Cross section of the conductor wire max.: 14 awg Rated voltage max.: 300 vdc / 250 vac 50/60 hz Environmental protection: nema 4 and ip 65 dust tight and water resistant Maximum rated temperatures for gaskets: Nitrile gasket: -25to +90 Silicone gasket: -40to +125 Plastic bag, inner box, master carton
Particular Cylinder Size Finsh Avaialable with OSK (One Side Key) 60mm SS 3 Key 70mm Antique 5 Key 80mm GRF (Graphite) 90mm Rose Gold Z Black CNK Rose Gold PVD ( Coin Cylinder With Nobe) 60mm 70mm 80mm 90mm BSK (Both Side Key) 60mm 70mm Half 40mm (Single Side Knobe) 45mm
Supplier: Seamless cylinders, weld cylinders, cng cylinders, dura tank of more than 40 types. all products have passed the quality certification of gb/t5099,gb/5842,iso9001,iso9809 1,iso9809 3,iso1118 ,iso11439 and others.they have been certified by tped,tuv,ce,dot,kgs peso e.t.c.
Services: Production,our own brand or oem, transportation
Buyer: Industrial gas of oxygen, argon, carbon dioxide helium.
Brazing cylinder in 0.88 L is designed for the Indian as well International markets. This cylinder is suitable for MAPP gas, Propane and Oxygen. The handheld cylinder makes it portable and easy to use for brazing purposes. The cylinder is designed as per DOT39.
Our Chlorine Cylinders are PESO approved. They come in the following water capacities: 42L, 84L, 100L, 118L.
Our propane tanks are DOT approved. Available in 20 LBS, 30 LBS, 50 LBS, 60 LBS and 100 LBS.
The 22.1L cylinder is DOT39 approved. This cylinder is used to fill Adhesives and Foam by various customers across the globe.
