(1). Material: nylon 66, 94v-2 certificated by ul.
(2). Heat-resisting. Acid and erosion control, insulate well and not apt to age.
(3). Operating temperature: -35ípc to 85ípc
(4). Color: natural (or white, standard color), uv black and other colors are available as requested.
(5). High quality color concentrates produce color consistency time after time.
(6). Ideal applications: color coding, identification, packaging continuity, and bundling aesthetics.
Zhejiang dar group
Cable tie
Spec. Price dimension quantity g./n. Weight
Mm 100pcs cm pcs kgs
2.5*60 54*32*30 70000 14/12
2.5*80 60000 16/14
2.5*100 50000 17/15
2.5*120 45000 17/15
2.5*150 40000 24/23
2.5*160 35000 25/24
2.5*200 30000 16/15
3.6*140 25000 18/17
3.6*150 25000 18/17
3.6*180 20000 18/17
3.6*200 20000 20/18
3.6*250 54*32*30 15000 22/21
3.6*280 15000 23/21
3.6*300 54*35*33 15000 22/20
3.6*370 54*32*30 10000 20/18
4.8*120 54*35*33 20000 18/17
4.8*160 54*32*30 15000 17/16
4.8*180 54*33*32 15000 21/19
4.8*190 54*33*32 15000 18/17
4.8*200 54*33*32 15000 22/20
4.8*250 54*32*30 10000 18/16
4.8*300 54*32*30 10000 20/18
4.8*350 54*33*32 10000 24/23
4.8*360 54*33*32 10000 25/24
4.8*370 54*33*32 10000 26/25
4.8*380 54*32*30 8000 26/25
4.8*400 54*32*30 7000 28/27
4.8*430 10000 29/28
4.8*450 54*33*32 7000 29/27
4.8*500 54*33*30 6000 29/28
Different from size
Et-500 electropneumatic transducer
Input electrical current:4-20ma, 0-10v
Output pressure:20-100kpa
Et-500 is electropneumatic transducer equipment, it can decrease supply pressure to produce output pressre which is effectively proportional to input electric signal.
Supply pressure range:125kpaí½1000kpa.With bulk augmenter supply big flow (20.4 m3/h).
Features:
Flow rate: 7.6m3/h when supply pressure is 175kpa
20.0m3/h when supply pressure is 700kpa
Min/max. Supply pressure:
Minimum-3psig(21kpa) above maximum output
Maximum-100psig(700kpa)
Sensitivity: <+-0.15% of span per 10 psig
Linearity:<+-0.75% of span
Repeaability: <0.5% of span
Hysteresis: <0.1% of span
Flow rate: 4.5 scfm(7.6m3/hr anr) at 100 psig(175 kpa) supply
12.0 scfm(20.0m3/hr anr) at 100 psig(700 kpa) supply
Maximum air consumption: 0.05scfm(0.07m3/hr ) midrange typical
Port size:
1/4 npt(pneumatic)
1/2 npt(electric)
Weight: 2.1lb.(0.94kg)
Input current:4-20ma
Output pressure:20-800kpa
The advent of the long stroke rolling diaphragm as a means of low-friction dynamic sealing has led to the development of controlair's line of diaphragm air cylinders. These cylinders provide virtually frictionless conversion of pneumatic pressure to linear force. The fact that there is no stiction or blow-by of any kind ensures accuracy, repeatability and sensitivity unheard of from conventional sliding seal air cylinders.
Material: rigid shrinkable pvc
To be shrinked by blower or hot water.
Maximum service temp:80
Dependable, stable and highly precise precision regulation
This is a high precision, multi-stage pressure regulator. This pressure controller provides the highest level of regulation accuracy and repeatability available. The type-100 is ideal for applications that call for the utmost of control and maximum stability under variable operating conditions. A stainless steel measuring capsule is used as a sensing element to activate the high gain servo balanced control mechanism in which the main valve is controlled by a pilot valve.This allows for greater accuracy and eliminates many of the problems associated with conventional regulators using range springs and diaphragms.
Flow capacity 14 scfm (25m3/hr.) at 100 psig (700 kpa) supply
Exhaust capacity 5 psig (35kpa) above 20 psig (140 kpa) setpoint
Type 100 - 2 scfm (3.4 m3/hr.)
Type 100hr - 10 scfm (17.0 m3/hr.) (high relief)
Sensitivity 1/8" (3.2mm) water
Pilot pressure chamber bleed rate less than 0.08 scfm (0.15m3/hr.)
Effect of supply pressure variation of 25 psig (170kpa) on outlet less than .005 psig (.03 kpa)
Supply pressure, maximum 150 psig (1050 kpa)
Weight 1.4 lb. (635g)
Port sizes 1/8", 1/4", 3/8"
Gage ports (2) 1/4"
Output pressure ranges 14~420kpa, 14~700kpa
Mounting options pipe or panel
