Cold Zone

A? Project: Led bulb aging line machine B? Specifications : 12000l×1000w×800h(mm) C? Quantity : One set D? Structure : Ring chain conveying, chain boards holder aging, frequency control of motor speed E? Function and feature : This equipment is professional for led bulbs inspection. Through high voltage, normal voltage, low voltage, roaming and fluctuation voltage, impact functions. High temperature zones to observe whether short-circuit, capacitance burst and black points will occur. Also used for inspecting the simulation daily use of led lamp cycling circuit and roaming seasoning area. Easy to cooperate. F? Specifications : 1. Motor : Adopt 1500w motor, wps80 type 1:60 of the speed reducer, the domestic well-known brand 2 hp's island converter, frequency conversion step less speed regulation, linear speed0.3—2m/min can be adjusted. 2. Machine body and strand : Made of 40×40 rectangle steel pipe by welding. Upper and lower body side protection using special aluminum alloy aging line dedicated. Protective board is made of 1.2mm cold steel sheet by bending. Support legs are equipped with galvanized adjustable soles. 3. Conveying chain: Double-pitch single-side-ear double-hole chain manufactured by shanghai chain factory, 1.5m long. 4. Chain plate: Made of 2mm thick 800×148×15mm cold rolling sheet, total 140 plates.Each plates for 12pcs of b22 bulbs . And equipped with high marks broken small circuit breaker. Road conductive bottom of the chain plate mounting system(copper), each installation of two conductive blocks, each plate were installed 2. 5. Daily output: The aging line once can aging1680pcs led bulbs. The aging time for one hour. One day can work 10 hours. Total daily output is 16800pcs of led bulbs one day. 6. Stop light shield: On both sides edges of the seven sections equipped a stop light shield plastic plates, using 4mm tawny organic glass plate and 40x40 aluminum alloy combinations and become effective damping light intensity to your eyes, better protect your eyes.

A? Project: LED tube light (fluorescent) aging line machine B? Specifications : 12000L×1540W×800H(mm) C? Quantity : One set D? Structure : Ring chain conveying, chain boards holder aging, frequency control of motor speed E? Function and feature : This equipment is professional for LEDT8 tube light inspection. Through high voltage, normal voltage, low voltage, roaming and fluctuation voltage, impact functions. High temperature zones to observe whether short-circuit, capacitance burst and black points will occur. Also used for inspecting the simulation daily use of LED lamp cycling circuit and roaming seasoning area. Easy to cooperate. F? S pecifications: 1. Motor : adopt 1500w motor, WPS80 type 1:60 of the speed reducer, the domestic well-known brand 2 HP's island converter, frequency conversion step less speed regulation, linear speed0.3—2M/min can be adjusted. 2. Machine body and strand : Made of 40×40 rectangle steel pipe by welding. Upper and lower body side protection using special aluminum alloy aging line dedicated. Protective board is made of 1.2mm cold steel sheet by bending. Support legs are equipped with galvanized adjustable soles. 3. Conveying chain: Double-pitch single-side-ear double-hole chain manufactured by Shanghai Chain Factory, 1.5m long. 4. Chain plate: Made of 2mm thick 1350×148×15mm cold rolling sheet, total 140 plates.. And equipped with high marks broken small circuit breaker. Road conductive bottom of the chain plate mounting system(copper), each installation of two conductive blocks, each plate were installed 2. 5. Daily output: The aging line once can also aging 560pcs T8 tube lamp . The aging time for one hour. One day can work 10 hours. Total daily output is 5600pcs LED tube lamp one day. 6. Stop light shield: On both sides edges of the seven sections equipped a stop light shield plastic plates, using 4mm tawny organic glass plate and 40X40 aluminum alloy combinations and become effective damping light intensity to your eyes, better protect your eyes. 7. Conductive slot: Up and down with all conduction channel rail, the insulating rubber sheet, and assembly stainless steel electric tank. 8. Constant temperature area: Complete thermostatic system USES electric heating type, set for a period of two pieces of 2000 w/set of electro thermal heating plate, automatic constant temperature at room temperature - 60 ?, digital temperature control instructions.

TADT portable humidity generator is a portable and high-precision temperature and humidity calibration instrument, which can meet the needs of measurement and calibration of conventional temperature and humidity measuring instruments such as temperature and humidity sensors, temperature and humidity transmitters, small temperature and humidity meters, etc. Functional characteristics * Test chamber space up to (3~5) times that of similar products, providing more efficient test conditions * The test chamber can accommodate various types of in-put cold-mirror-viewer probes for comparison and calibration * Composite sensor jack design, suitable for various diameter temperature and humidity sensors and transmitters * Transparent window and lighting design of measuring room to facilitate reading of various small temperature and humidity meters * Can be calibrated simultaneously (10~15) with small temperature and humidity probes * Calibrate (3-5) block size digital temperature and humidity meter simultaneously * The test chamber provides temperature uniformity within 0.1 in a full range of 5~50 * Design of external drying cylinder, desiccant replacement can be operated on-line, convenient and simple * Design of double-zone drying cylinder, supporting both molecular sieve and discolored silica gel * Visual display of liquid level and dryer state is beneficial to state monitoring during work * Provide 4 channel external (0~1) Vã??(0~5) V and (4~20) mA standard signal inputs * The instrument has built-in humidity conversion software to facilitate users to convert relative humidity, temperature and dew point temperature * Support temperature and humidity curve display, easy for users to view temperature and humidity state trend * 7-inch color LCD touchscreen

A? Project: LED tube light (fluorescent lamp) and bulb aging line totally machine B? Specifications : 12000L×1540W×800H(mm) C? Quantity : One set D? Structure : Ring chain conveying, chain boards holder aging, frequency control of motor speed E? Function and feature : This equipment is professional for LEDT8 tube light/led bulbs inspection. Through high voltage, normal voltage, low voltage, roaming and fluctuation voltage, impact functions. High temperature zones to observe whether short-circuit, capacitance burst and black points will occur. Also used for inspecting the simulation daily use of LED lamp cycling circuit and roaming seasoning area. Easy to cooperate. F? S pecifications: 1. Motor : adopt 1500w motor, WPS80 type 1:60 of the speed reducer, the domestic well-known brand 2 HP's island converter, frequency conversion step less speed regulation, linear speed0.3—2M/min can be adjusted. 2. Machine body and strand : Made of 40×40 rectangle steel pipe by welding. Upper and lower body side protection using special aluminum alloy aging line dedicated. Protective board is made of 1.2mm cold steel sheet by bending. Support legs are equipped with galvanized adjustable soles. 3. Conveying chain: Double-pitch single-side-ear double-hole chain manufactured by Shanghai Chain Factory, 1.5m long. 4. Chain plate: Made of 2mm thick 1350×148×15mm cold rolling sheet, total 140 plates. 70 pieces of plants install 4 sets of plug for LEDT8 tube light ,Other 70 plates for 16pcs of E27 bulbs . And equipped with high marks broken small circuit breaker. Road conductive bottom of the chain plate mounting system(copper), each installation of two conductive blocks, each plate were installed 2. 5. Daily output: The aging line once can also aging 280pcs T8 tube lamp .1120pcs LED bulbs. The aging time for one hour. One day can work 10 hours. Total daily output is 2800pcs LED tube lamp and 11200pcs of LED bulbs one day. 6. Stop light shield: On both sides edges of the seven sections equipped a stop light shield plastic plates, using 4mm tawny organic glass plate and 40X40 aluminum alloy combinations and become effective damping light intensity to your eyes, better protect your eyes. 7. Conductive slot: Up and down with all conduction channel rail, the insulating rubber sheet, and assembly stainless steel electric tank. 8. Constant temperature area: Complete thermostatic system USES electric heating type, set for a period of two pieces of 2000 w/set of electro thermal heating plate, automatic constant temperature at room temperature - 60 ?, digital temperature control instructions.

Led nail lamp hyn02-36hjq-xw Product color :white Rated input :ac110-240v Product power :36w Quantity of bead :24pcs Ratio & layout :365nm-405nm Product size :205*203*93mm Power :36w Timing :10s, 30s, 60s, low heat mode 99s N.W :300g G.W :605g Features of led nail lamp hyn02-36hjq-xw: 1.Sunshine nails, comfortable eye contact, relieve burning sensation 2.2-in-1 led/uv lamp 3.Low heat mode relieves you from pain when curing gels 4.Double light source (365+405mm) leds to cure uv gel /builder/led gel 5.24pcs strategically placed leds, no dead-zone, more free 6.The time for 10s, 30s, 60s and painless mode comfortable nail in 99s 7.5000hrs lifetime Advantages of led nail lamp hyn02-36hjq-xw: 1. Environmental protection, common nail lamp is used in the uv lamp, the ingredient with“mercury”inside the tubes, and mercury is not environmental protection material, is extremely harmful to human body, if the bulb is broken, recycling more trouble some, increased the recovery cost. But the but the semiconductor light emitting device, no harmful substances. 2. Exclusive painless pattern, solve the problem of roasted rubber hand pain, lcd digital display. 3. Safe, not hot, the original ordinary nail lamp, the client accidentally when using hot easily, because the tubes in a high quantity of heat, light at the average temperature in 50-70 degrees, and some products to more than 80 degrees, once the hand of the tubes, can burn, and led cold light source, when use not fever, even if the user with the hand to touch, it does not matter. 4. Long service life, the service life of the ordinary nail lamp bulb commonly is 3000-5000 hours, some tubes is less than 3000 hours, so often should change bulb, more troublesome, also increased the use cost, and the service life of the led is in commonly 35000 hours, short use of up to 50000 hours, do not need to change bulb so often trouble, saves the cost. ......