A? Project: LED tube light (fluorescent) aging line machine
B? Specifications : 12000L×1540W×800H(mm)
C? Quantity : One set
D? Structure : Ring chain conveying, chain boards holder aging, frequency control of motor speed
E? Function and feature : This equipment is professional for LEDT8 tube light inspection. Through high voltage, normal voltage, low voltage, roaming and fluctuation voltage, impact functions. High temperature zones to observe whether short-circuit, capacitance burst and black points will occur. Also used for inspecting the simulation daily use of LED lamp cycling circuit and roaming seasoning area. Easy to cooperate.
F? S pecifications:
1. Motor : adopt 1500w motor, WPS80 type 1:60 of the speed reducer, the domestic well-known brand 2 HP's island converter, frequency conversion step less speed regulation, linear speed0.3—2M/min can be adjusted.
2. Machine body and strand : Made of 40×40 rectangle steel pipe by welding. Upper and lower body side protection using special aluminum alloy aging line dedicated. Protective board is made of 1.2mm cold steel sheet by bending. Support legs are equipped with galvanized adjustable soles.
3. Conveying chain: Double-pitch single-side-ear double-hole chain manufactured by Shanghai Chain Factory, 1.5m long.
4. Chain plate: Made of 2mm thick 1350×148×15mm cold rolling sheet, total 140 plates.. And equipped with high marks broken small circuit breaker. Road conductive bottom of the chain plate mounting system(copper), each installation of two conductive blocks, each plate were installed 2.
5. Daily output: The aging line once can also aging 560pcs T8 tube lamp . The aging time for one hour. One day can work 10 hours. Total daily output is 5600pcs LED tube lamp one day.
6. Stop light shield: On both sides edges of the seven sections equipped a stop light shield plastic plates, using 4mm tawny organic glass plate and 40X40 aluminum alloy combinations and become effective damping light intensity to your eyes, better protect your eyes.
7. Conductive slot: Up and down with all conduction channel rail, the insulating rubber sheet, and assembly stainless steel electric tank.
8. Constant temperature area: Complete thermostatic system USES electric heating type, set for a period of two pieces of 2000 w/set of electro thermal heating plate, automatic constant temperature at room temperature - 60 ?, digital temperature control instructions.
A? Project: LED tube light (fluorescent lamp) and bulb aging line totally machine B? Specifications : 12000L×1540W×800H(mm) C? Quantity : One set D? Structure : Ring chain conveying, chain boards holder aging, frequency control of motor speed E? Function and feature : This equipment is professional for LEDT8 tube light/led bulbs inspection. Through high voltage, normal voltage, low voltage, roaming and fluctuation voltage, impact functions. High temperature zones to observe whether short-circuit, capacitance burst and black points will occur. Also used for inspecting the simulation daily use of LED lamp cycling circuit and roaming seasoning area. Easy to cooperate. F? S pecifications: 1. Motor : adopt 1500w motor, WPS80 type 1:60 of the speed reducer, the domestic well-known brand 2 HP's island converter, frequency conversion step less speed regulation, linear speed0.3—2M/min can be adjusted. 2. Machine body and strand : Made of 40×40 rectangle steel pipe by welding. Upper and lower body side protection using special aluminum alloy aging line dedicated. Protective board is made of 1.2mm cold steel sheet by bending. Support legs are equipped with galvanized adjustable soles. 3. Conveying chain: Double-pitch single-side-ear double-hole chain manufactured by Shanghai Chain Factory, 1.5m long. 4. Chain plate: Made of 2mm thick 1350×148×15mm cold rolling sheet, total 140 plates. 70 pieces of plants install 4 sets of plug for LEDT8 tube light ,Other 70 plates for 16pcs of E27 bulbs . And equipped with high marks broken small circuit breaker. Road conductive bottom of the chain plate mounting system(copper), each installation of two conductive blocks, each plate were installed 2. 5. Daily output: The aging line once can also aging 280pcs T8 tube lamp .1120pcs LED bulbs. The aging time for one hour. One day can work 10 hours. Total daily output is 2800pcs LED tube lamp and 11200pcs of LED bulbs one day. 6. Stop light shield: On both sides edges of the seven sections equipped a stop light shield plastic plates, using 4mm tawny organic glass plate and 40X40 aluminum alloy combinations and become effective damping light intensity to your eyes, better protect your eyes. 7. Conductive slot: Up and down with all conduction channel rail, the insulating rubber sheet, and assembly stainless steel electric tank. 8. Constant temperature area: Complete thermostatic system USES electric heating type, set for a period of two pieces of 2000 w/set of electro thermal heating plate, automatic constant temperature at room temperature - 60 ?, digital temperature control instructions.
For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb Wattage: 10W Blue UV light Lumen: 900-1000lm Color Temperature (CCT): 6500K Input Voltage: AC 90-130V & 220v-240V With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.
Supplier: Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,
Services: Buying office, oem, components sourcing, value added services
Buyer: In shell pecan nut, macadamia nut
Power (W): 4/8/16; Power factor: 0,5; Voltage/Frequency (V/Hz): 220/50; CCT (K): 3000/4000/5000/6500; Luminous efficacy (lm/W): 100/110/120; CRI (Ra): > 80; Life span (hrs): 15.000; Three options: 0.3m & 0.6m & 1.2m; Flicker-free; CE, KC certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
A? Project LED tube light, ceiling lamp, bulb aging line multifunction machine B? Dimensions 12000L×1700W×750H(mm) C? Quality One set D? structure Ring chain conveying, small car type independent testing aging, frequency control of motor speed E? function The LED bulb and fluorescent lamp (tube light) aging line multifunction machine to the detection of sophisticated light LED products, LED lights through the high-pressure, atmospheric pressure, low pressure, shock experienced roaming voltage area. Voltage adjustment range. Use whole lamp which features sophisticated and intuitive, easy to operate, suitable for different varieties of LED lights. Power system frequency control system, easy to operate. F? Specifications 1. Motor Speed motor : china Brand Bihebi, 750W Reducer :Chines famous Brand OU fei er ,WPS80 ,1:60 type specific speed :1:6 Frequency converter : Sino-foreign joint venture's Brand ShenDao 1 HP frequency converter, frequency conversion stepless speed regulation, the linear velocity of 0.3-2 m/min adjustable. 2. Structure The frame is 40×40 rectangular steel welding production;fuselage aging line using a dedicated special aluminum alloy;nose and tail curved seal plate is made of 1.5mm cold roll forming,galvanized legs with adjustable foot cups, body 2 m period. 3. Conveyor chain Shanghai Chain Factory produced using eight points double pitch chain holes. 4. Aging trolleys Whole aging line about 47 small circular trolley combination, of the upper and lower structural design, easy aging different products: Trolley outside dimensions: length 550 × width 440 × height 1400 (mm); using doublelayer structure, the upper panel with 3% epoxy insulation board, install 24 E27 lamp holder, easy to aging LED bulb. 3% lower panel with epoxy insulation board blanket, install eight sets of four speakers clip, aging with outside lighting, installation of 14 sets of side-line bayonet T8 lamps, LED fluorescent tube aging. Each small trolley 24 sets of simultaneous aging bulb, 16 sets of external wiring LED lights, 14 sets of LED tube light. 5. Light blocking shield Located on both sides of the line all the way to block all decent light shield (except non-electric operating area), using 4mm combined with tinted plexiglass plate made of aluminum alloy. Effective energy-saving lamps light attenuation and better protect the eyes. 6. Conductive Systems: In the aging body frame along each side of the car is equipped with two(zero, Fire Wire)conductive grooves along the bilateral arrangement.