Proportional Solenoid Valve Hydraforce Sp10-20

For Proportional Solenoid Valve equivalent to HydraForce SP10-20, AAK received re-peat orders from the 3rd customer within 18 months Last April, we launched a proportional solenoid valve equivalent to HydraForce standard part SP10-20. It is a solenoid-operated, 2-way, normally closed, poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load-holding applications. Proportional valves are the ceiling of hydraulic cartridge valve manufacturers. Among more than 100 hydraulic cartridge valve manufacturers in Zhejiang Province, China, there are no more than 5 manufacturers who can produce proportional valves, with a proportion of less than 5%. However, AAK not only has SP10-20, but we have developed more than 10 models of proportional valves. Since E-SP10-20 proportional solenoid valve was posted, we have received the re-peat orders from 3 customers till now. Within 18 months, total 3 foreign customers tested AAK samples and place the re-peat orders, which proves that the E-SP10-20 proportional solenoid valves shipped by AAK has very stable quality and good performance. AAK hydraulic cartridge solenoid valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SP10-20 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 250 bar (3625 psi) Flow: 60 lpm (15 gpm) Internal Leakage: 5 drops/min max. at 250 bar (3625 psi) Operating Fluid Temperature: - 40 to 100 �°C (with Standard Buna N seals) Cavity: 10-2 AAK E-SP10-20 Hydraulic Proportional solenoid valve, benchmarking HydraForce SP10-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (810) 2024-08-19

Supplier: Steam coal, copper ore, iron ore, zinc ore, manganese ore in india, africa and morocco. we can supply copper ore 500mt to 3000 mt monthly basis, iron ore 25000mt to 50000mt, zinc ore 5000mt to 50000mt monthly basis. we are specialized in engineering valves, all types of metal pipes, fittings, fasteners, tubes, sheets, buttweld pipes and fittings and forge products. our mining of stone like indian limestone, manganese ore. we are associated with leading manufacturers of icumsa 45, 100, 160 etc. in brazil we supply in bulk vessel quantities moq is 12500 mt.

After tested by customers in USA and Russia for 1 year, AAK Proportional Solenoid Valve has been approved to be equivalent to original HydraForce SP08-20 Last September, we launched a proportional solenoid valve equivalent to HydraForce standard part SP08-20. A solenoid-operated, 2 port, normally closed, poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load-holding applications. As mentioned in our article last year on 03/27/2023, AAK spent 6 months, 3 times material changes, 4 times testing to produce E-SP08-20 Solenoid Proportional Valve successfully. During the past year, we shipped test orders to customers in the United States and Russia. The Russian customer placed their regular order in August, and the American customer placed their regular order last week. The function and performance of AAK E-SP08-20 has been approved to be completely equivalent to original HydraForce SP08-20. AAK hydraulic proportional solenoid valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SP08-20 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 207 bar (3000 psi) Flow: 22 lpm (6 gpm) Internal Leakage: 5 drops/min max. at 207 bar (3000 psi) Operating Fluid Temperature: - 40 to 120 �°C (with Standard Buna N seals) Cavity: VC08-2 AAK E-SP08-20 Hydraulic Proportional solenoid valve, benchmarking HydraForce SP08-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (812) 2024-09-02

Supplier: 1 ) pp woven bags 2 ) pp woven fabric & pp woven rolls 3) bopp woven sack 4) fibc bag / jumbo bag 5 ) block bottom valve bag 6 ) block bottom bag with open mouth 7 ) jute bag 8 ) wheat flour 9 ) wheat flour maida 10 ) organic wheat flour 11) wheat flour type 55 to 65 12) ashirwad wheat flour

AAK Hydraulic Solenoid Cartridge Valve is equivalent to HydraForce SV08-20. Several US customers repeat the orders 2 3 times a year Recently, we received the repeat order from a customer in the United States for a hydraulic solenoid cartridge valve equivalent to Hydraforce SV08-20 again. It is a solenoid-operated, 2-way, normally closed, poppet-type, screw in hydraulic cartridge valve, with standard and manual override options. This valve is intended as a blocking or load holding device for low flow circuits having pull-only manual override requirements for handles or cable linkage. This is a standard part and commonly used. Till now, AAK hydraulic solenoid cartridge valve E-SV08-20 has been shipped to several customers in the United States. Its quality and stability has been approved by these customers. Some of them repeat the orders 2 â?? 3 times a year. The advantages of AAK Hydraulic Solenoid Cartridge Valve E-SV08-20 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV08-20 Hydraulic Solenoid Cartridge Valve: Pressure Rating: 207 bar (3000 psi) Flow Rating: 23 lpm (6 gpm) Max.Internal Leakage: 0.15 ml/min (3 drops/min) max. at 207 bar (3000 psi) Temperature: - 40 â?? ~ + 120 â?? with Buna N seals Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: VC08-2 AAK E-SV08-20 Hydraulic Solenoid Cartridge Valve, benchmarking HydraForce SV08-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (818) 2024-10-14

Supplier: Refrigerant gas cylinders, lpg, propane, valves

Supplier: Micro silica (silica fume), silica, fly ash, pozzolano, ggbfs and white cement, other cementatious materials and factory/plants specialized spare parts & equipments, automation & switchgear, drives & transmission spares, instrumentation & pump, pneumatic & hydraulic spares, valves & actuators, mechanical parts, high carbon ferro chrome, foundry pig iron, iron ore concentrate, chromite ore, antimony ore, silicon metal 441 (powder), ferro silicon (fesi), iron ore pellet, copper concentrate

For Hydraulic Pressure Reducing/Relieving Proportional Valve equivalent to HydraForce TS10-36, AAK received official order from an old customer in the USA Last June, one of our old customers in USA placed a test order for a hydraulic Pressure Reducing/Relieving Proportional Valve equivalent to HydraForce TS10-36. It is a screw-in, cartridge style, pilot-operated, spool-type, proportional pressure reducing/relieving valve which can be infinitely adjusted across a prescribed range using a variable electric input. The regulated pressure is proportional to the input electrical current. In Ningbo China, there are other hydraulic cartridge valve manufacturers who have this model, and AAK price is not the most competitive one, but because the valves that they purchased from AAK in the past have very stable quality, they do not want to take risk to try other hydraulic cartridge valve manufacturers, especially this is a proportional valve, which is not easy, so they still placed the trial order with AAK. Till now, it has been 1 year since the trial order was shipped. Last week, AAK received the official order of 200 pcs qty from the customer. The advantages of AAK Hydraulic Pressure Reducing/Relieving Proportional Valve E-TS10-36 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-TS10-36 Hydraulic Pressure Reducing/Relieving Proportional Valve: Max. Operating Pressure: 240 bar (3500 psi) Capacity: 56.8 lpm (15 gpm) Max.Control Current: 12 VDC coil - 1.10 A; 24 VDC coil - 0.55 A Relief Pressure Range (from zero to maximum control current): A: 6.9 - 207 bar (100 - 3000 psi) B: 6.9 - 159 bar (100 - 2300 psi) C: 6.9 - 117 bar (100 - 1700 psi) Cavity: VC10-3 AAK E-TS10-36 Hydraulic Pressure Reducing/Relieving Proportional Valve, benchmarking HydraForce TS10-36, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (805) 2024-07-15