Refiner

The ZSM series coarse refiner is a great choice for the coarse grinding of pulp raw materials and re-pulping of broke and waste paper. This paper mill equipment is also suitable for the refining of continuous fiber pulps such as cotton pulp, wood pulp and helm pulp.Capacity: 10-30 T/D Features of the Coarse Refiner 1. The pulp equipment comes with a long refining zone and strong cutting capacity for fiber. 2. It ensures less damage to the fiber capillary, and a homogenous refining result. The materials will be ground roughly before entering the defibering zone, thus ensuring the paper has a high fracture length, tearing strength, and breaking strength. 3. The conical refiner features a low energy consumption, high production capacity high efficiency, low noise and easy maintenance. 4. It is equipped with both manual and electric operating devices.

The ZSM series coarse refiner is a great choice for the coarse grinding of pulp raw materials and re-pulping of broke and waste paper. This paper mill equipment is also suitable for the refining of continuous fiber pulps such as cotton pulp, wood pulp and helm pulp.Capacity: 10-30 T/D Features of the Coarse Refiner 1. The pulp equipment comes with a long refining zone and strong cutting capacity for fiber. 2. It ensures less damage to the fiber capillary, and a homogenous refining result. The materials will be ground roughly before entering the defibering zone, thus ensuring the paper has a high fracture length, tearing strength, and breaking strength. 3. The conical refiner features a low energy consumption, high production capacity high efficiency, low noise and easy maintenance. 4. It is equipped with both manual and electric operating devices.

About Lead Refining Lead recycled from used lead acid batteries or other sources (Secondary Smelting) via the Mini Blast Furnace or Rotary Furnace route, contains lot of contamination and undesired components. On the other hand, Lead required for battery manufacturing is either soft Lead with 99.97% purity or hard Lead of varying Antimony compositions. In order to make quality of lead suitable for its different uses, different variations of pot melting processes are employed. These include – “Re-Melting” for removal of slag, “Refining” for attaining required purity levels and “Alloying” for producing various alloys of lead. The equipments used are the same, the consumables and the processes, however, differ. Description of Melting Pot The Melting Pot (or Refining Pot or Alloying Pot, as it is variously called), is a mechanical mixing device with a pot and a heating arrangement. The inner pot is made of heavy MS plate with dish end bottom. It is placed within a jacket of refractory bricks, which in turn, are protected by an outer cover of MS plate with reinforcements. The pot is covered at the top with opening for feeding lead ingots and is provided with an electro-mechanical mixer. At the bottom, a heating source, usually an oil fired burner, is provided to heat the pot and to melt the lead. Once lead melts, impurities are skimmed and removed and any consumables required are added. Lead is then drained from the pot through an outlet pipe and valve. Capacity of such pots depends upon the requirements of particular units. Standard pot capacities made are from 4.0 TpB to 20.0 TpB. Higher capacity pots are also manufactured as required by any particular establishment. A typical 10.0 TpB Refining Pot has the following standard sizes and specifications: •Diameter (ID) : 1150mm •Height : 1250mm (+Dish Depth of 200mm) •Flange Width : 350mm •Outer Shell Diameter : 1900mm •Stirrer MoC & Dia : SS-304 & 75mm •Stirrer Motor : 5.0 HP x 960 RPM •Outlet Valve Size : 40mm •Burner : Diesel Fired •Fuel Consumption Range : 8-18kg/ltr Melting pots are installed both with and without accessories which may include Ingot Casting Machine, Ball Making Machine (where Ball Mills are installed down the line), Air Pollution Control Systems, Jib Cranes etc.

Usage  The injection refining equipment is used for refining, degassing and slag removal of molten aluminum in a static furnace. Equipment Features  Good refining effects. The equipment has the advantages of both gas refining and flux-refining. Low consumption of refining agent, and uniform feeding.  Low metal loss. After proper flux-refining, there is less dross on the melt surface and the dross is loose. The metal is rarely encased and little metal is taken out during slag removal.   Technical Parameters Barrel capacity: 15L, 30, 45L  Refining gas type: high-purity nitrogen or argon Refining gas pressure: 0.10.4MPa   Maximum refining gas flow: 300NL/min   Flux flow: 0-3000g/min, adjustable   Flux size: 1070 meshes

Ladle refining furnace has flexible technological character, is appropriate particulary to middle or small factory. Ladle refining furnace(lrfs) is an ideal system for producing special steel such as high-quality carbon steel, alloys structural steel, bearing steel, tool steel and stainless steel.It's used to desulfurize steel, remove other impurities and hold the molten steel for casting and rolling operations.

1, This machine consisted by the host pulping mechanism , worm wheel feeding mechanism, bearing, coupling and base version. 2, This machine is fixed on the two fixed abrasive discs of mill shell body and stator feed tray and installed on the rotor positioning plate of two rotor abrasive discs to form two grinding area. 3, Pulp passes through by the tube of the grinding shell body and the stator into the heart of the two grinding area, under the action of centrifugal force and slurry pressure through the grinding zone, after grinding zone tooth plate extrusion, complete the beating process, pulp out from mouth. 4, The rotor positioning plate connected to the main shaft with spline floating, as a flexible axial movement. 5, The grinding clearance is adjusted for the manual, through the worm gear transmission inspires wire mother rotates, the stator feed screw driven plate make the corresponding axial movement, makes the grinding area clearance change, grinding clearance and pressure to meet the process requirements, pressure current is the disc?s instructions. 6, It takes the elastic cylindrical coupling, smooth operation. 7, The disc material is wear-resistant alloy cast iron, all by grinding. Instruction: It is main equipment to make coarse and pure pulp. It is used to regrind pulp dross and recycle paper, high efficiency and less eletricity consumption. Feature It is suitable for continuous refining chemical,mechanical,and waste paper pulp under the consistency of 3%-5.5%.It is idea pulp beating equipment.

Description of Refiner 1.Double Disc refiner is used for continuous refining each kind of paper pulp ,straw ,wood,reed,bamboo,rags and waste paper pulp. 2.The equipment is mainly used for coarse beating, refining and re-pulping of broke and waste paper. 3.It is available for long fiber pulp such as cotton, wood and hemp. 4.The equipment is furnished with automatic control system and can beat with constant power or constant energy consumption. 5.The beating effect is stable.

The G860 CNC refinement machine has many attractive characteristics. First, they have high precision and high efficiency processing capabilities. Whether in cutting, carving, or carving, these machines can complete the task in a very accurate way to ensure the quality and fineness of the final product. Secondly, the G860 CNC sculpture machine has extensive adaptability. Whether it is plastic, metal or other materials, these machines can easily cope with the needs of different industries. In addition, these machines also have the characteristics of automation and intelligence. They are equipped with advanced CNC systems that can automatically complete the processing process according to the preset program, which greatly improves production efficiency. Finally, the G860 CNC refinement machine also has the characteristics of easy operation and convenient maintenance. Whether it is novices or experienced operators, they can easily operate these machines and perform necessary maintenance. In short, the G860 CNC refinement machine has become an indispensable processing equipment in all walks of life with its high accuracy, high efficiency, extensive adaptability and intelligent characteristics.

Old tire pyrolysis technology is a green technology that solves waste tire pollution to the environment. And can ease the energy crisis, in today's society, this is a very meaningful environmental protection industry. Tire pyrolysis oil is an end product extracted from the pyrolysis process and is often used to heat raw materials and generate electricity with heavy machinery. If the pyrolysis oil is subjected to a specialized pyrolysis oil distillation plant distillation, the extracted diesel oil can be used for diesel generators and light fuel oils. The main part of the entire pyrolysis system includes reactors, transmissions, catalysis rooms, cooling pipes, manifolds, heavy oil tanks, light oil tanks, condensers, oil-water separators, safety devices, vacuum systems, dust collection systems, etc. The main working principle of old tire refining equipment: By pyrolysis of the oil using a high-temperature distillation tire, the impurities in the oil are distilled off, and the filtered light oil vapor increases in heat, and impurities in the pyrolysis oil fall into the furnace. Light oil and gas passes through a multi-stage heating system, is filtered, enters a cooling system, is then liquefied, passes through a water separator, and flows into a light oil tank. After degreasing and desulfurization, clean and transparent diesel oil can be obtained. The average diesel yield is 80%-85%. Finally, the residue in the furnace is discharged from the furnace. It is a substance that functions like asphalt. The approximate yield of bitumen is: 15%-20%. The end product of the Dongying Group's used tire refining equipment was diesel oil and asphalt. What are their main uses? 1. Diesel: Mainly used for heavy machinery, generator power oil, and boiler heating combustion oil. 2. Asphalt: Mainly used for direct paving, or sent to asphalt refineries.