Produce formation:
Two component paint, group a is by senior acrylic resin, pigments, additives and solvent, and isocyanate as group b.
Product features:
.Good fullness, high gloss, good decorative performance,
.Excellent weather resistance, light color retention
.Excellent chemical resistance, smoke resistance, water resistance, oil resistance, film tough
.Good resistance to impact and abrasion resistance,
.Good physical and mechanical properties
Technical data:
Color and appearance of paint film gray, film formation
Viscosity (stormer viscometer), ku 60
Fineness, um 40
Gloss high
Solids content, % 55-65
Flashing point, â?? 27â??
Dry film thickness, um 60
Drying time (25â??), h surface dry2h, hard dry24h
Hardness, class 0.5
Adhesion (zoned method), class 1
Impact strength, kg, cm 50
Flexibility, mm 1
Alkali resistance 48 hrs
Water resistance 48 hrs
Using:
Applicable to steel structure of the large bridge, port machinery, engineering machinery, containers, ships, water and electricity station, substation, require long-term protection against corrosion decorative topcoat.
Packing:
Paint:18 kg/bucket curing agent: 3 kg/bucket.
Description Two-component acrylic aromatic polyurethane finish coating Recommended Use :- This product is a topcoat along with recommended undercoats for use in chemical plants, fertilizer plants, petrochemical and pharmaceutical complex, power plants, cement plants, steel plants, heavy chemicals and off-shore and on-shore industries. It is recommended for very high chemical resistance and for areas not exposed to direct sunlight. Product is also recommended for application over suitable primer for OEM industry. Physical Data COLOUR : Assorted shades FINISH : Glossy / Semi glossy / Matt SOLIDS BY VOLUME : 40 ± 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / lt at recommended DFT of 30 µ FLASH POINT : Base : Above 23 C Hardener : Above 23 C DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) : SURFACE DRY : 30 minutes max HARD DRY : Overnight FULL CURE : 7 DAYS. SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation The surface of primer or intermediate coats, over which this product is applied as topcoat, should be free from oil, moisture, dust and dirt. Aged coatings should be roughened by emery paper grade 400 / 600 for better bonding. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional spray / By Airless Spray THINNER : Type 290 POT LIFE : 3 hours min at 30 C RECOMMENDED DFT : 30-40 µ. OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be applied over Epoxy and Polyurethane primers, intermediate coats and topcoats.
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.
Acrylic Matt Topcoat Clear
Brighto Acrylic Rock Topcoat Price : 0.90 Ltr - USD 4.3 3.60 Ltr -USD 14.9 18 Ltr- USD 71.0
2Pk Acrylic Exterior Polyurethane is an exterior quality long life polyurethane lacquer based on acrylic base & aliphatic isocyanate hardener. The product with beautiful surface quality is highly resistant to aggressive physical & chemical environment stresses in conformity with DIN 68861-1B. Presence of aliphatic isocyanate, UV inhibitor & other special additives make it non-yellowing, non-chalking, resistant to termite & other microorganism & flexible enough to withstand woodâ??s dimensional variation. Maxiwood Acrylic Polyurethane is available in pigmented & lacquer (gloss/matt/silkmatt) form. Itâ??s water like appearance enables itâ??s use over light colored wood.
Description Two component air drying aromatic polyurethane finish coating Recommended Use :- It is recommended as topcoat for Original Equipment Machines, Hygienic, Maintenance painting where mild chemical resistance along with good abrasion resistance and decorative finish are required. Sometimes it is recommended as undercoat of finish coats application for economic benefits. Physical Data COLOUR : Assorted shades FINISH : Glossy / Semi glossy / Matt SOLIDS BY VOLUME : 40 �± 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30 FLASH POINT : Base : Above 23C Hardener : Above 30C DRYING CHARACTERISTICS : SURFACE DRY :20 - 30 minutes (At 30C and 65% Relative humidity) HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation This being a Topcoat, which is applied over underneath primer or intermediate coats, the surface should be free from oil, moisture, dust and dirt. Aged coatings should be roughened by emery paper grade 400 / 600 followed by solvent wipe for better bonding. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional spray / By Airless Spray THINNER : Type 290 POT LIFE : 3 hours min at 30 C RECOMMENDED DFT : 30-40 OVERCOATING INTERVAL : MIN : 8 hours MAX :24 hours COMPATIBILITY : Can be applied over Epoxy and Polyurethane primers, intermediate coats and topcoats.
Two components Acrylic Topcoat White Gloss, formulated with non-yellowing content combined with good pigment endowed with good flow ,and leveling characteristics provides the excellent equalization of the gloss effect combined with the high mechanical resistant , and soft touch that enhance the overall beauty and practicality of the finishing product. USES Applicable on pale wood as [maple, birch ash, reconstructed veneers, and further coatings as white or pastel colored the surfaces and protect them from yellowing.
Supplier: Polymer cement based waterproof coating, external wall high efficient waterproof material for water leakage, fast harden micro expansion cement, organic silicon waterproof material, polymer cement mortar waterproof material, acrylic nano high elastic waterproof coating, silicon rubber waterproof coating, 911 polyurethane waterproof coating, single component water based solvent free polyurethane waterproof coating, single component solvent based polyurethane waterproof coating
Supplier: (torch-on or self-adhesive)sbs/app modified bitumen waterproof membrane, pvc/epdm/tpo roof membrane, HDPE geomembrane(hdpe pre-applied self-adhesive waterproof membrane)/pond liner;acrylic/polyurethane waterproof coating, js cement-based polymer waterproof membrane, sealants, exterior wall transparent glue.
