Description
Two-component, air drying polyurethane based clear.
Recommended Use :-
This product is recommended Top coat for glossy , uv protection,weather property and also as penetrating primer on bare concrete, wooden substrate prior to application of subsequent coating system.
Physical Data :-
COLOUR : Clear
FINISH : Smooth & Glossy
SOLIDS BY VOLUME : 40 �± 3%
THEORETICAL SPREADING RATE : 16 sq.mt / ltr at a DFT of 25 �µ
FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C
DRYING CHARACTERISTICS (At 65% Relative Humidity & at 30C) : HARD DRY : Overnight FULL CURE : 7 Days
SHELF LIFE : BASE : 6 months HARDENER : 6 months
Surface Preparation
New concrete should be cured for at least 1 month prior to paint application. Ensure concrete surface is absolutely dry and free from moisture, oil, laitance, dust and dirt. For old concrete, ensure surface is free from oil, grease, algal & fungal growth and any old coating. Sand Blasting on concrete gives the best performance and should be given first preference out of the available surface preparation methods. If blasting is impracticable, Acid Etching with diluted Hydrochloric Acid followed by fresh water washing to be adopted. Seasoned wooden articles should be scuffed with Emery 220/400 to achieve smooth surface. Please refer our Directive Sheet on Surface Preparation.
Application Data
MIXING RATIO : Base : Hardener (As per our recommendations)
APPLICATION : By Brush / By Conventional Spray
THINNER : Type 290
POT LIFE : 3 hours min at 30�° C
RECOMMENDED DFT : 30-40 �µ.
OVERCOATING INTERVAL : MIN : 8 hours MAX : Indefinite
COMPATIBILITY : Can be applied on Epoxy primers and oleo-resinous primer and coated / over coated by two component paints like Epoxy, PU, etc.
Supplier: Water borne paints, wood coatings, lacquer clear matt, lacquer clear gloss, polyurethane clear gloss, polyurethane clear matt, emulsion paints for interior and exterior, latex for wood
Supplier: Paints, varnishes, polyurethane clear coats, specialty paints, specialty primers ( all premium)
Services: Trading and warehousing
A quick drying two pack polyurethane clear silk-matt /matt topcoat for application over wood & wood substitute with excellent smooth & silky finish. On full cure the product forms a very hard & flexible film with outstanding light fastness, solvent & chemical resistance & mechanical properties including mar /scratch resistance guarantying a long-term protection of wood.
Polyurethane (2k Pu Metal Dead Matt Clear
ACRYLIC THINNER IT is a blend of Alcoholâ??s, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings. PROPERTIES Colour : Crystal Clear Odor : Characteristic Non - volatile matter : Nil S.g kg/l: 0.850�±0.05 Flash Point (ASTM D93) Not less than 12 �°C Description Review
G P THINNER It is a blend of Alcohol's, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings. PROPERTIES Colour : Crystal Clear Odor: Characteristic Non-volatile matter : NIL S.g kg/l :0.850�±0.05 Flash Point (ASTM D93): Not less than 12 �°C
PU varnish is a single pack polyurethane alkyd based clear coating designed for wooden surface. The product enhances the natural look of wood & has good resistance to normal mechanical & chemical attack including water & moisture. It is also resistant to microorganism & termite growth & can withstand moderate temperature hence very useful for kitchen & bathroom. The product works very well in wooden floor & stairs with heavy wear. The product is available in clear & variety of wood colors in high gloss, matt & silk-matt version
A. PRODUCT DESCRIPTION: These are Paint thinners. These are designed to improve the flow of a range of MARLAC Paint products. Can also be used as a cleaner for metal cleaning, pumps and tools before and after applications. B. TYPICAL USE: Suitable as Thinner for : 1)Alkyd and Oil based Paints 2)Epoxy Paints 3)Polyurethane paints 4)All types of Stoving and Air drying paints 5)Cleaning thinner C. COLOUR: Colourless clear liquid. D. PRODUCT DATA: (a) Boiling Range : Calculated (b) Flash Point : As Per Std (c) Density : 0.85 + 0.1 The data may slightly vary depending on the properties of the RM Solvents used. E. PACKAGING: 5 or 20 Lt Drum F. STORAGE: The material must be stored as per the regulations. Keep the containers in Dry, Cool, Well Ventilated space and away from the source of Heat and ignition. Containers must be kept tightly closed. Handle with care. G. SHELF LIFE: Minimum 12 months, provided stored properly. H. HEALTH AND SAFETY: Please follow the precautionary advices on the container. Use under well ventilated conditions. Do not inhale spray mist. Avoid Skin contact. Spillage on the skin should immediately be removed with suitable cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately. I. DISCLAIMER: The information in this document is given to the best of MIPPLâ??s knowledge, based on the laboratory testing and practical knowledge. MIPPL reserves the right to revise the data without further notice. Users should always consult MIPPL for specific guidance on the general suitability of this product for their needs and specific practices.
Wood Coating 1 NC Grain Filler 2 NC Sanding Sealer 3 NC Clear Lacquer 4 2K Melamine 5 Wood Guard Polish 6 Wood Stain 7 Clear Varnish 8 1K Polyurethane Wood Finish Thinners 1 Thinner-700/701/713 2 Thinner-911/999 3 Thinner-PU/D.A.A./Retarder/ EPOXY/Stoving Anticorrosives & Water Proofing Insulating Varnish
