PRODUCT DESCRIPTION:
Solid or stranded tinned or bare copperconductor.
Fire-resistant PVC or LSOH insulation andJacket.
Fiber glass tape or fire-resistant mica tape insulation(Optional).
Test on electric cables under fire conditions complies with IEC60332-3-24:2000,UL1424,Power, Limited Fire alarm Circuit Cables C22.2N0.208-03,Fire-Alarmand Signal.
Measurement of smoke density of cable burning under defined conditions on electric cables under fire conditions complies to IEC 61034-2:2005.
Test on electric cables under fire conditions complies to IEC60331-21:1999.
KEY APPLICATIONS:
Fire detection and fire alarm systems for buildings.
Voice alarm systems.
Emergency voice communication.
Emergency and escape lighting.
Other essential service control circuits for 'standard' fire resistance.
SFEX CT Manteau, also called the Cable Tray Manteau, is very efficient in extinguishing the initial fire suppression with immediate responses in case of fire because when a micro capsule for fire extinguishing reacts to a certain temperature and flame, it automatically disperses extinguishing agents. It\'s based on a cooling fire extinguishing method, shows an excellent characteristic of being able to extinguish a fire completely with an immediate response at the time of initial fire if you cover it over the electric power line. SFEX Solution : SFEX CT Manteau / SFEX AP Tape 1. Horizontal Section Fire : Access Floor, Cable Pit, and Cable Tray Installation and How It Works 1. Cover the SFEX CT Manteau. 2. Prevent the spread of fire with extinguishing/flame retardance properties 2. Vertical Section Fire Installation and How It Works 1. Wind the SFEX AP Tape on the cable. 2. Prevent the spread of fire with extinguishing/flame spread prevention properties Test Result : AP Tape Test Item Test Standard Unit Test Result Flame test of vertically placed cables The carbonization length should not exceed 2.5mm from the bottom edge of the burner - Do not exceed (carbonization length: 0.6m) During installation, photograph after installation *Test Information Test Facility Standard : KS C IEC 60332-3-10 : 2003(Compliant) Volume of nonmetallic material(L) per meter of test specimen : 1.5 (volume of nonmetallic material for finished cable, not including AP Tape) Number of test pieces : 5 Number of tiers : 1 Number of burners : 1 Position of test piece : Spatial type Flame application time (minutes) : 20 AP Tape installation method : AP Tape in 0.6/1 kV TFR-CV 4C 35 from the height of burner to the top 10cm gap between AP Tape and 20cm length of AP Tape
FIRE ALARM CABLE Fire Resistant Type Stranded Conductor BS6387 EN50200 PH30 KEY APPLICATIONS Fire detection and fire alarm systems for buildings. Voice alarm systems and emergency voice communication. Emergency and escape lighting. Control circuits for fire safety and fire fighting systems. TECHNICAL DESCRIPTION Operating Voltage 300/500V Test Voltage(50Hz) 2.0kV Conductor Stranded Bare Copper Insulation Material Silicone Rubber Jacket Material LSZH STANDARDS BS EN 50200 - PH30 Fire Resistant Test - Flame & Shock - 30 Minutes BS EN 50200 - PH60 Fire Resistant Test - Flame & Shock - 60 Minutes BS EN 50200 - PH120 Fire Resistant Test - Flame & Shock - 120 Minutes BS 6387 Category CWZ Fire Resistant Test TECHNICAL DATA Number of cores Nominal cross section conductor mm Nominal jacket outer diameter Cable weight Conductor resistance at 20 C 2 0.8 5.7 47.5 23.8 2 1.0 6.1 52 19.5 2 1.5 7.1 70 13.3 2 2.5 8.3 98.5 7.98 4 0.8 6.7 76.5 23.8 4 1.0 7.2 85.6 19.5 4 1.5 8.1 116 13.3 4 2.5 10.4 185 7.89
FRP cable trays at INDO are manufactured from Glass Armored Thermoset fireretardant resins Available in different range applied for ideal locations where metallic systems get easily corroded INDO FRP Cable Tray system meet stringent Fire Retardant requirements It provides advantages like Anti Corrosion High Strength No Earthing UV Resistant Good Electrical Insulator Low thermal conductivity etc
Fire resistant cable Fire resistant cable to iec 331& bs 6387(lpcb certificate) Conductor: plain annealed Fire barrier: mica tape Insulation: xlpe Filler: polypropylene yarn Binder tape: polypropylene Sheath : lsoh compound
Application:XLPE Cable is used indoor or outdoor, in tunnel, cable furrow or pipe, to be laid underground, be applicable to the well, water inside and fall in the bad soil. Standards:IEC60502-2, BS7870-4, BS7870-7, BS7870-8 Cores: 1 Core, 3 Core Conductor:Cu or Aluminum Insulation:XLPE (Cross-Linked Polyethylene) Armor:non-armor, steel tape armored, steel wire armored Sheath:PVC or PE Sheath Color:Black or Colors Product Description: - XLPE insulated PVC sheathed power cable (XLPE/PVC Cable) - XLPE insulated steel tape armored PVC sheathed power cable (XLPE/STA/PVC Cable) - XLPE insulated steel wire armored PVC sheathed power cable (XLPE/SWA/PVC Cable) - Flame retardant XLPE insulated PVC sheathed power cable (FR/XLPE/PVC Cable) - Flame retardant XLPE insulated steel tape armored PVC sheathed power cable (FR/XLPE/STA/PVC Cable) - Flame retardant XLPE insulated steel wire armored PVC sheathed power cable (FR/XLPE/SWA/PVC Cable)
Low tension copper conductor 4 core 35mm2 xlpe fire resistant cable price http://www.zmscable.com
Xlpe fire resistant cable price China market 0.6/1kv cu/xlpe/swa/PVC power cable
0.6/1kv low voltage yjv XLPE insulated pvc sheathed 5 core copper conductor fire resistant cable http://www.zmscable.com
Application:XLPE Cable is used indoor or outdoor, in tunnel, cable furrow or pipe, to be laid underground, be applicable to the well, water inside and fall in the bad soil. Standards:IEC60502-2, BS7870-4, BS7870-7, BS7870-8 Cores: 1 Core, 3 Core Conductor:Cu or Aluminum Insulation:XLPE (Cross-Linked Polyethylene) Armor:non-armor, steel tape armored, steel wire armored Sheath:PVC or PE Sheath Color:Black or Colors
