FIRE ALARM CABLE
Fire Resistant Type
Stranded Conductor BS6387 EN50200 PH30
KEY APPLICATIONS
Fire detection and fire alarm systems for buildings.
Voice alarm systems and emergency voice communication.
Emergency and escape lighting.
Control circuits for fire safety and fire fighting systems.
TECHNICAL DESCRIPTION
Operating Voltage 300/500V
Test Voltage(50Hz) 2.0kV
Conductor Stranded Bare Copper
Insulation Material Silicone Rubber
Jacket Material LSZH
STANDARDS
BS EN 50200 - PH30 Fire Resistant Test - Flame & Shock - 30 Minutes
BS EN 50200 - PH60 Fire Resistant Test - Flame & Shock - 60 Minutes
BS EN 50200 - PH120 Fire Resistant Test - Flame & Shock - 120 Minutes
BS 6387 Category CWZ Fire Resistant Test
TECHNICAL DATA
Number of cores Nominal cross
section
conductor mm Nominal jacket outer diameter Cable weight Conductor
resistance at
20 C
2 0.8 5.7 47.5 23.8
2 1.0 6.1 52 19.5
2 1.5 7.1 70 13.3
2 2.5 8.3 98.5 7.98
4 0.8 6.7 76.5 23.8
4 1.0 7.2 85.6 19.5
4 1.5 8.1 116 13.3
4 2.5 10.4 185 7.89
SFEX CT Manteau, also called the Cable Tray Manteau, is very efficient in extinguishing the initial fire suppression with immediate responses in case of fire because when a micro capsule for fire extinguishing reacts to a certain temperature and flame, it automatically disperses extinguishing agents. It\'s based on a cooling fire extinguishing method, shows an excellent characteristic of being able to extinguish a fire completely with an immediate response at the time of initial fire if you cover it over the electric power line. SFEX Solution : SFEX CT Manteau / SFEX AP Tape 1. Horizontal Section Fire : Access Floor, Cable Pit, and Cable Tray Installation and How It Works 1. Cover the SFEX CT Manteau. 2. Prevent the spread of fire with extinguishing/flame retardance properties 2. Vertical Section Fire Installation and How It Works 1. Wind the SFEX AP Tape on the cable. 2. Prevent the spread of fire with extinguishing/flame spread prevention properties Test Result : AP Tape Test Item Test Standard Unit Test Result Flame test of vertically placed cables The carbonization length should not exceed 2.5mm from the bottom edge of the burner - Do not exceed (carbonization length: 0.6m) During installation, photograph after installation *Test Information Test Facility Standard : KS C IEC 60332-3-10 : 2003(Compliant) Volume of nonmetallic material(L) per meter of test specimen : 1.5 (volume of nonmetallic material for finished cable, not including AP Tape) Number of test pieces : 5 Number of tiers : 1 Number of burners : 1 Position of test piece : Spatial type Flame application time (minutes) : 20 AP Tape installation method : AP Tape in 0.6/1 kV TFR-CV 4C 35 from the height of burner to the top 10cm gap between AP Tape and 20cm length of AP Tape
Supplier: Fire pump, sprinklers, fire resistant cable, fire extinguisher, fire alarm product
Supplier: Fire Alarm Cables.
Supplier: Coaxial cable,combo cable, control cable,lan cable,speaker cable,alarm cable and fire alarm cable
Services: Shipping
FIRE ALARM CABLE Fire Resistant Type Stranded Conductor BS6387 EN50200 PH30 KEY APPLICATIONS Fire detection and fire alarm systems for buildings. Voice alarm systems and emergency voice communication. Emergency and escape lighting. Control circuits for fire safety and fire fighting systems. TECHNICAL DESCRIPTION Operating Voltage 300/500V Test Voltage(50Hz) 2.0kV Conductor Stranded Bare Copper Insulation Material Silicone Rubber Jacket Material LSZH STANDARDS BS EN 50200 - PH30 Fire Resistant Test - Flame & Shock - 30 Minutes BS EN 50200 - PH60 Fire Resistant Test - Flame & Shock - 60 Minutes BS EN 50200 - PH120 Fire Resistant Test - Flame & Shock - 120 Minutes BS 6387 Category CWZ Fire Resistant Test TECHNICAL DATA Number of cores Nominal cross section conductor [mm�² Nominal jacket outer diameter [mm] Cable weight [kg/km] Conductor resistance at 20�° C [Ohm/km] 2 0.8 5.7 47.5 23.8 2 1.0 6.1 52 19.5 2 1.5 7.1 70 13.3 2 2.5 8.3 98.5 7.98 4 0.8 6.7 76.5 23.8 4 1.0 7.2 85.6 19.5 4 1.5 8.1 116 13.3 4 2.5 10.4 185 7.89
These cables are used for the fire alarm systems, power supply control of the equipment that must function during fire, emergency lighting, the equipment for evacuation and follow up and warning systems in intelligent or semi – intelligent buildings where intense human population or valuable goods are found such as: hospitals, cinemas, theatres, schools, shopping centers, airports, factories, etc. Firekab products have a low smoke density, are halogen free and they don’t emit poisonous gases. We can produce firekab cables with bs 6387 c w z, en 50200, iec 60331, etc. We have 2 lpcb certified firekab products.
Supplier: Security Camera, Burgler Alarm, Fire Alarm, Cable, Cctv Cable, Baby Camera, Adapters,
Buyer: Security Camera, Burgler Alarm, Fire Alarm, Cable , Cctv Cable, Baby Camera
Supplier: Insulated wires and fire alarm cables
Services: Exporting
Supplier: Fire alarm panels, detector,cctv,cables
Buyer: Fire alarm meterial
