Coaxial Cable RG6(CCTV cable)
Cable Features&Advantages:
1) High physical foaming
2) Low loss in attenuation
3) OPTION: Dual /Quad Shield /Messenger /Quad Shield And Messenger
RG6 Coaxial Cable
Application:
Drop cable for CATV and MATV distribution
Specification for RG6 (CCTV Cable)
1) Copper clad steel conductor
2) Dielectric: Gas expanded polyethylene
3) Shield: Bonded type aluminum polypropylene laminated foil and aluminum braided wire
4) PVC or sunlight resistant PVC Jacket
Can be installed without shutting off the power
Excellent AT performance ,The Maximum inductive at the operating point of AT sheath can reach 25 KV
Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops
Large Span lengths and the largest span is over 1000m
Accurate control on Aramid application greatly improving the strength of cables
Accurate fiber excess length and stranding pitch to ensure the good performance of tensile strength and the temperature
The design life span is over 30 years
ADSS cable structure
ADSS cable is the short form for All-dielectric Self-supporting Optical Cable.
ADSS fiber optic cable is loose tube stranded; the tubes are filled with water resistant filling compound.
The tubes are stranded around fiber reinforced plastic are a non-metallic central strength member into a compact and circular cable core.
After the ADSS cable core is filled with filling compound, it is covered with a thin PE inner sheath, after two layers of Aramid yarns which are applied in two directions over the inner sheath as strength member,
ADSS optical fiber cable is completed with PE or AT outer sheath.
Optic fiber cable specifications
1. Up to 144 fibers
2. Light weight, less additional load to tower. The maximum span can reach 1500m.
3. Strong anti-pull performance, more than 90KN.
4. Non metallic structure provides good insulation, excellent lightning resistant.
5. Equal distribution of aramid yarns with good production process, excellent stress/strain performance.
6. Excellent bullet resistant performance
7. Excellent tracking resistant performance.
8. Installation wuthout power off and the normal transmission of cable won't be influenced by power line fault
CAT6/CAT6A U/UTP Ethernet RJ45 Patch cord, SNAGLESS Strain relief Boot, AWG26 Stranded
1. Cat5e UTP Patch cord, with two modelded RJ45 Plug 3u' Gold plated,
2. Unshielded twisted Cable, 4*2*AWG26 Cable, OD=5.2MM, OFC Copper conductor,
(CCA available as well).
3, Compliant with EIA/TIA 568B, EN50173, AND ISO/IEC 11801,
4. Connect way: 1: 1 or Crossover for option,
5. Excellent Fluke test data, low Attenuation and high NEXT, RL etc, Pass Fluke Patch cord test
6. Suitable for 100MHz High speed Data transmission, Gigabit Ethernet, TP-PMD,
7. UL or cUL Listed, compliant with CMX, CM, CMR
8. Have full series popular Strain relief Mould for Choice,
Terms:
1.OEM is welcomed
2.ISO/CE/ETL/ROHS/UL/SONCAP and other certifications are available
3.Competitive price and high quality offered.
4. Best service for you!
Basic Info:
1. Name: : Telephone Cable/ Telephone Wire
2. Structure:
Conduct---pure copper/copper clad aluminum
Insulation---blue/yellow/pink/grey/others you like
3. Size:
According to Standard/Sample/Customer's request.
4. The material of the inner conductor and outer sheath materials in accordance with customer requirements.
Material Instruction
1.CCA or 24AWG Soft Plain Copper.
2.Eco-friendly,pollution-free and new materials selected.Promise new material only.
3.Insulation: Solid HDPE;
4.Eco-friendly PVC/LSZH Jacket , high-temperature resistance,long working life.
Appliacation
1. Exceeds ANSI/TIA-568B. 2 and ISO 11801 2nd Edition Class E Category 5e channel standards.
2. Exceed requirements of ANSI/TIA-568B. 2 and IEC 61156-5 Category 5e Component standards;
3. Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications.
4. Foil shield reduces ingress of EMI interference to ensure cable performance at high frequency levels.
5. Length cable marking enable easy identification of remaining cable which reduces installation time and cable scrap.
6. Color Availability: Additional cable colors available.
Electronic Characteristics
Impedance: 100�± 15(ohms).
Rated Temperture: 75�º C
DC Resistance unbalance(%): Max2.5
DC Resistance 20�º C: 8.4(Ohms/100m)
Pair-to-Ground Capacitance Unbalance: 330(Pf/100m)
Transfer Impendance: Max 10 mohms/m@100MHz.
Installation Resistance: >5000M *KM
Dielectric strength: DC 2500V 2S
Material Instruction
1. 100% Grade-A 23AWG Soft Plain Copper.
2.Eco-friendly,pollution-free and new materials selected.Promise new material only.
3.Insulation: Solid HDPE or Skin-Foam-Skin PE;
4.Eco-friendly PVC Jacket , high-temperature resistance,long working life.
Physical Electrical Characteristics
Using standard twisted construction design, small crosstalk of signal transmission Upload and download in high speed transfer.
Bandwidth is standard 250 MHz.
Support 10-Gigabit Ethernet netword transmission requirements.
DC resistance (max): 4.8/100m at 20C;
Mutual capactitance (max): 5.6nF/100m;
Unbalanced capacitance (max): 330pF/100m;
Dielectric strength between conductors (min): 2.5kV/2s;
Impedance: 1-250MHz 100±15;
Differential phase delay (max): 45ns/100m;
Operating temperature: -20~+60C;
Permitted bend radius: 10 times diameter of the cable.
Terms:
1.OEM is welcomed
2.ISO/CE/ETL/ROHS/UL/SONCAP and other certifications are available
3.Competitive price and high quality offered.
4. Best service for you!
Basic Info:
1. Name: : Telephone Cable/ Telephone Wire
2. Structure:
Conduct---pure copper/copper clad aluminum
Insulation---blue/yellow/pink/grey/others you like
3. Size:
According to Standard/Sample/Customer's request.
4. The material of the inner conductor and outer sheath materials in accordance with customer requirements.
Brief Introduction
304 stainless steel is a common material in stainless steel, with a density
of 7.93 g/cm cubed, also known as 18/8 stainless steel in the industry .
High temperature resistance 800�ºC , with good processing performance ,
high toughness characteristics , widely used in industry and furniture decoration
industry and food and medical industry.
Chemical Composition
Cold Rolled Stainless Steel Tape AISI 304 En1.4301 2b 0.25*54 mm
PRODUCT DESCRIPTION:
Solid or stranded tinned or bare copperconductor.
Fire-resistant PVC or LSOH insulation andJacket.
Fiber glass tape or fire-resistant mica tape insulation(Optional).
Test on electric cables under fire conditions complies with IEC60332-3-24:2000,UL1424,Power, Limited Fire alarm Circuit Cables C22.2N0.208-03,Fire-Alarmand Signal.
Measurement of smoke density of cable burning under defined conditions on electric cables under fire conditions complies to IEC 61034-2:2005.
Test on electric cables under fire conditions complies to IEC60331-21:1999.
KEY APPLICATIONS:
Fire detection and fire alarm systems for buildings.
Voice alarm systems.
Emergency voice communication.
Emergency and escape lighting.
Other essential service control circuits for 'standard' fire resistance.
