Sleeve Clamp Ds1014 48.3mm
Internal Manual Clamps Features: Quick reliable alternative to External Line-up Clamps. Quick Line-up for continuous Welding of Pipes Screw Jack type mechanism to have adequate alignment Toggle action puts maximum power on pipe Gap is unobstructed for full stringer bead It is designed for all diameter and wall thickness of pipes Heavy duty jack box puts more power on the pipe with less operator effort IMC is available in 6 to 48 Pipes
Pipe Leak Repair Clamps - Split Bolted - High Pressure ANSI Pressure Classes 300#, 400#, 600#, 900#, and 1500#. DESIGN STANDARDS AND SPECIFICATIONS ANSI Pressure classes 300#-1500# Design based on API 6H. Design calculation ASME Sec. VIII Div. I Body materials A516 Gr. 70, ASTM A105 PTFE coated bolts and nuts, bolt material A193 Gr. B7 and nut material A194 Gr. 2H Standard coating yellow epoxy 100 microns Gaskets (H) NBR or Viton Weldable option is available with heat insulating gaskets Double row sealing is available on request Sacrificial anodes can be installed on the sleeves for long term cathodic protection Non-standard lengths are available on request Full MTC document will be supplied with the order MATERIAL: Material: ASTM A 516 Gr.70 / ASTM A 105 Fasteners: ASTM-A-193-B7 & ASTM-A-194-2H Seal: Buna N Paint: Epoxy Coating Yellow 100 Microns Vent Port + Plug: Yes Lifting Lug (8 & above) Hinge Assembly: (8 & above) Yes Design Temperature: 65 C N.D.T. 100% RT Butt Weld - 100% U.T. of vent plug welds. (Fillet) 100% MPI of Hinge welds. (Fillet) Certification: EN 10204 3.1 Design Calculation: ASME Sec. VIII Div. I
External Manual Clamps Features: Very easy to use. Manual Operation. Precision fitted to the proper specifications to ensure proper alignment and quick clamping with a convenient hand lever for quick line-up of the pipe. "No-Tack" model have an arched cross bar design which allows for 360 degree continuous welding without clamp removal. Available in sizes from 4" to above.
We offer different types of Scaffolding Clamps including Swivel coupler, right angle coupler, BRC coupler, putlog coupler,sleeve coupler, beam clamp etc.Our Board Retaining Clamp is designed and manufactured by our dedicated team of experts.The size of the clamp is 48.3 MM & weight is 585 Grms.It is offered with m.s bolt & boron steel bolt.
SPECIFICATIONS : Clamp Sizes : 15mm - 300mm THICKNESS : 1.5mm Width : 19mm MOC : Mild steel coating : Zinc Coating Nut Size : Threaded - 10 mm Rubber : PVC Special Sleeve
Supplier: Half repair sleeve, full encirclement steel sleeve, type a sleeve, type b sleeve, half sole segments, girth weld sleeve, aramdillo sleeves, insert sleeve, internal pipe sleeve, weld coupling, pipe sleeve, leak clamp, split sleeve clamp, sleeve split repair, bolted clamp, split sleeves, clamp for pipe repair
Services: Manufacture and exports
ADSS Preformed Suspension Clamp The base is attached by a rear hinge for quick and easy installation of ADSS cables Cushioned pad made of UV resistant neoprene sleeve insert to gently hold the ADSS cable in place Includes stainless steel bolts and locking washers for locking clamps ADSS Suspension Clamp Suspension clamps are also called fixture suspension or suspension fittings. According to the application, the suspension clamps are divided into ABC optical cable suspension clamps, ADSS optical cable suspension clamps, and overhead line suspension clamps. ADSS Optical Cable Suspension Clamp Suspension cleats for ADSS cables are also known as prefabricated suspension cleats. Prefabricated catenary clamps that function the same as ordinary catenary clamps are designed to suspend conductors or ground wires in a vertical direction. Huaneng prefabricated suspension clamps are suitable for high voltage above 220kv. Unique features of prefabricated suspension clips: Effective protection of conductors Avoiding Electricity Waste Due to Corona easy installation Prefabricated suspension clamps are designed to protect ADSS (All Dielectric Self Supporting) cables from sloshing caused by wind currents. Suspended clamps are widely used in transmission lines, towers or power distribution systems. The distance between the two towers is called the span. For short spans, prefabricated suspension clamps with O-rings are often used. This kind of suspension clamp has the characteristics of lightest weight, convenient installation, and can protect ADSS optical cable more effectively. For mid-span and long-span, there is also a prefabricated suspension clamp that is aluminum-clad. The Armor Clip Suspension connects with U-Clips to hang cables. Aluminum-clad suspension clamps support and protect ADSS fiber optic cables from bending damage. According to the span, the short span adopts single suspension clamp, and the long span adopts double suspension clamp. Composition: inner pre-twisted wire, the outer pre-twisted wire, rubber insert, cast aluminum shells, right-angle shackle, U-type shackle. Purposes: supporting cable, make the ADSS hang on the tower.
ADSS Preformed Suspension Clamp The base is attached by a rear hinge for quick and easy installation of ADSS cables Cushioned pad made of UV resistant neoprene sleeve insert to gently hold the ADSS cable in place Includes stainless steel bolts and locking washers for locking clamps ADSS Suspension Clamp Suspension clamps are also called fixture suspension or suspension fittings. According to the application, the suspension clamps are divided into ABC optical cable suspension clamps, ADSS optical cable suspension clamps, and overhead line suspension clamps. ADSS Optical Cable Suspension Clamp Suspension cleats for ADSS cables are also known as prefabricated suspension cleats. Prefabricated catenary clamps that function the same as ordinary catenary clamps are designed to suspend conductors or ground wires in a vertical direction. Huaneng prefabricated suspension clamps are suitable for high voltage above 220kv. Unique features of prefabricated suspension clips: Effective protection of conductors Avoiding Electricity Waste Due to Corona easy installation Prefabricated suspension clamps are designed to protect ADSS (All Dielectric Self Supporting) cables from sloshing caused by wind currents. Suspended clamps are widely used in transmission lines, towers or power distribution systems. The distance between the two towers is called the span. For short spans, prefabricated suspension clamps with O-rings are often used. This kind of suspension clamp has the characteristics of lightest weight, convenient installation, and can protect ADSS optical cable more effectively. For mid-span and long-span, there is also a prefabricated suspension clamp that is aluminum-clad. The Armor Clip Suspension connects with U-Clips to hang cables. Aluminum-clad suspension clamps support and protect ADSS fiber optic cables from bending damage. According to the span, the short span adopts single suspension clamp, and the long span adopts double suspension clamp. Composition: inner pre-twisted wire, the outer pre-twisted wire, rubber insert, cast aluminum shells, right-angle shackle, U-type shackle. Purposes: supporting cable, make the ADSS hang on the tower.
