High temperature alloy casting
Category:Titanium alloy casting
High temperature alloy casting is made by moulding, forming shells, sintering, pouring and post-processing. Common grades are Ti60 etc.
Product Description
High temperature alloy casting is an important structural metal developed in the 1950s.It is one of the key materials of modern aero-engines, mainly used for forging parts such as aero-engine air pressure discs and blades.
High-temperature titanium alloys, also known as heat-resistant titanium alloys, refer to titanium alloys with high strength at 400-600 C, which are mainly used to manufacture aero-engine compressor discs and rotor blades. Common grades are TC4, Ti60, TC17 and so on.
High temperature titanium alloys have high strength in the entire working temperature range, good plasticity at room temperature, good creep resistance and good thermal stability. It has good fatigue resistance at high temperature and room temperature. According to the structure
Supplier: High-temperature alloy, centrifugal casting tubes
Low temperature alloy casting Category Titanium alloy casting Low temperature alloy casting can be used as an important material for the low-temperature structure of hydrogen-oxygen engines. Common grades are TC4 etc. Product Description Low temperature alloy casting can show stronger mechanical properties at low temperature.At present, it has been used in the field of liquid rocket engines, mainly as structural materials such as hydrogen storage tanks for hydrogen-oxygen engines, hydrogen pump impellers, etc., which greatly improves the comprehensive performance of liquid rocket engines. Low-temperature titanium alloys refer to titanium alloys that can work normally under low temperature conditions. They are generally divided into three categories, alpha titanium alloys, beta titanium alloys and alpha-beta titanium alloys. Typical low-temperature titanium alloy products are suitable for working at 253C as a storage container for liquid fuel, and some alloys have good low-temperature plasticity and fracture toughness. The strength of low-temperature titanium alloys can be increased as the temperature decreases, and the toughness remains basically unchanged, making it easy to weld. It has high specific strength, corrosion resistance and low thermal conductivity. It can not only be used as a storage container for low-temperature objects, but also can be used as low-temperature structural parts for the aerospace industry
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Supplier: Investment castings, cast artificial joints, impellers & vanes, skid button, high-temperature alloy castings, machinery parts, ceramic cores
heat resisting alloy series: GH2132; GH3030; GH 3128; GH4145; GH4169; GH 4080
Aluminum-zinc alloy casting Category:Aluminum alloy casting Aluminum-zinc alloy casting has good processing performance, and there are common grades such as AC1A and ZA43. The mechanical properties of aluminum-zinc alloy are similar to brass, and it has good machining properties and can be processed into small metal parts. Common grades are AC1A, ZA43, etc., and the surface treatment effect is good, can adapt to a variety of electroplating processes, and has good corrosion resistance. The mechanical properties of aluminum-zinc alloy are similar to brass, and it has good machining properties and can be processed into small metal parts. Common grades are AC1A, ZA43, etc., and the surface treatment effect is good, can adapt to a variety of electroplating processes, and has good corrosion resistance. The aluminum-zinc alloy alloy has excellent processing performance, the overall comprehensive performance is close to that of lead brass, the surface treatment effect is good, and it has good electrical conductivity. It can be widely used in electronic and electrical industries. The lower one is added, and it is an environmentally friendly material, which can meet most environmental protection requirements.
Category:Aluminum alloy casting Cast aluminu-silicon alloys is a process in which aluminum-silicon alloys are processed into products that can be directly used through a casting process. Common grades are A356.0, A413.0 and so on. Cast aluminu-silicon alloys is a very important industrial alloy. It has important uses in the automobile manufacturing industry, high-tech electronics industry, aerospace materials and other products, and is an ideal wear-resistant material. Aluminum silicon alloy may be a reasonably ferroalloy with aluminum and silicon because the main components. Generally, the content of silicon is 11 and atiny low amount of copper, iron and nickel are added to enhance the strength.Aluminum silicon alloy is employed to manufacture low and medium strength castings with complex shapes, like covering, motor shell, bracket, etc. it's also used as brazing solder. When the silicon content is low (such as 0.7), the ductility of aluminum silicon alloy is sweet, which is usually used as deformation alloy. When the silicon content is high (such as 7%), the filling property of aluminum silicon alloy melt is nice, which is usually used as casting alloy. In the Al Si alloy with silicon content exceeding Al Si eutectic point (silicon 12.6%), when the particle content of silicon is as high as 14.5% 25%, adding a specific amount of Ni, Cu, Mg and other elements can improve its comprehensive mechanical .
Nickel-Based Precision Alloy Casting Category:Nickel alloy casting Nickel-Based Precision Alloy Casting includes nickel-based soft magnetic alloys, nickel-based precision resistance alloys and nickel-based electrothermal alloys. Common grades are N05500 etc. Nickel-Based Precision Alloy Casting is commonly used in the electronics industry, resistors and other fields.In recent years, it has been widely used in the field of environmental protection and energy development, improving the comprehensive performance of the devices used. Nickel-based alloy refers to an alloy with nickel as the basic element and still has high strength and certain oxidation corrosion resistance at high temperature of 650-1000 C. Nickel-based precision alloy is one of them, which includes nickel. Base soft magnetic alloy, nickel base precision resistance alloy, etc.
Medium-strength structural alloy casting Category:Nickel alloy casting Nickel-based heat-resistant alloys is a kind of nickel-based alloy, and the common grades are GH738, GH4738 etc. Product Description Nickel-based heat-resistant alloys is a nickel-based alloy. There are many different classifications of nickel-based alloy. Heat-resistant alloy is a material that can be used at high temperatures.For example, chemical and chemical equipment in the petrochemical field, atomic power generation in the energy field, comprehensive utilization of coal and other fields. The main elements of nickel-based heat-resistant alloys are nickel and chromium, and some other elements are also added to improve the solid solution strengthening of the alloy. They can still have high strength and oxidation resistance at high temperatures, and are often used in similar aircraft engines. and other high-temperature parts on the equipment. Nickel-based alloys can dissolve more elements in them, and can still maintain good organizational stability after dissolving the elements. The representative Incoloy alloy series is resistant to corrosion and creep resistance. It can also be used in Stress cracking is prevented to a certain extent.
