A head of Size 22,35,50,78 would be completed attaching an assembly
TL-1 burning furnace is consists of 5 parts: natural gas burner + inner tank + insulation box + fan + control system. The burner forms a high-temperature flame after full combustion in the high-temperature resistant inner tank, these flame mixes with the cold or recirculated air to produce a new and high-temperature air. Under the action of the fan, it is discharged to provide heating for drying machines or places. Advantages/features 1. Simple structure and low cost 2. Large air volume and small wind temperature fluctuation 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
TL-4 model Direct burning furnace with 3 layers sleeve consists of 3 layers of cylinders. It uses fully burned natural gas to obtain high-temperature flame, and mixing this temperature with fresh air to achieve the required hot air device. Due to the use of fully automatic single-stage fire, two-stage fire or modulating burner, the output hot air is extremely clean by natural gas fully burned, , meeting the drying and dehydration needs for most stuffs. The external fresh air enter the furnace body under negative pressure, takes two strokes and sequentially cools the middle cylinder and the inner tank. After being fully mixed with the high-temperature flame in the mixing zone, it is extracted from the furnace body and enter the drying room. When the temperature reach the setting number, the main burner stops working and the auxiliary burner continues to burn to maintain the temperature. When the temperature drops to the set lower limit temperature, the main burner will be run again. 4ã??Advantages/features 1. Simple structure and easy installation 2. Small air volume, high temperature, adjustable from normal temperature to 500â?? 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. The fresh air has a long stroke that can fully cool the inner tank, so the outer tank can be touched without insulation. 6. Equipped with high temperature resistant centrifugal fan, large pressure center and long lift
TL-3 model Direct burning furnace with lower Inlet and upper outlet is consists of 8 parts: natural gas burner + inner tank + insulation box + fan + fresh air damper + waste heat recovery device + dehumidification fan + control system. It is specially designed for supporting downflow drying room/heating rooms. After fully combusts the natural gas inside the inner tank, it�´s mixed with recycle or fresh air, under the action of the fan, it is discharged from the upper outlet into the drying room or heating space. Then cooled air pass through the lower air outlet for secondary heating and continuous circulation. And when the humidity of circulating air reaches the emission standard, the dehumidification fan and fresh air damper will start simultaneously. The exhausted moisture and fresh air implement sufficient heat exchange in the waste heat recovery device, so the moisture is discharged and the fresh air with recovered heat enter the circulation system. 4. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. Integrating the dehumidification and fresh air system, heat loss is extremely small through by the waste heat recovery device. 8. Automatically replenish fresh air
TL-2 model Direct burning furnace is consists of 6 parts: natural gas burner + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by full combustion of natural gas. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. 4. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
Very little operated (ony 6000 hours totally!) fuel oil fired package boiler made by Högfors (nowadays Foster Wheeler) in 1988. Complete plant with combustion air fan and feed water pumps for immediate delivery, in very good condition. Main scope of the delivery: - Högfors 30 t/h boiler - Oilon burner - Economizer - Combustion air fan - 2 pcs of 90 kW / 25 bar KSB feed water pumps - Fuel oil pumping unit made by Oilon - 8 pcs of steam shoot blowers - valves, fittings and maintenance supports . Type of boiler Water tube type with natural circulation, with two drums Manufacturer Kymin Osakeyhtiö, Högfors, Finland (Foster Wheeler) Model of the boiler: H52-47-25 bar Year of manufacturing 1980 Starting day of operation 16.11.1980 Evaporation 47 t/h saturated steam Temperature of steam 226 oC Effect 30 MW Structural pressure 25 bar Feed water temperature 120 oC Furnace volume 74,5 m3 Surface of furnace c. 136 m2 Surface of convection part 420 m2 Surface of economizer c. 504 m2 Water volume 15,8 m3 Oil Heavy oil (POR 230) Oil burner Saacke SKV, fully automatic, modulating Regulating area of burner 610-3050 kg/h Oil pumping- and pre- Oilon Osva 4000 kg/h heating station Feed water pumps 2 pcs + 1 pc as spare. KSB-centrifugal pump MOVI 65/6, massflow 59 t/h, 29,5 bar motor 90 kW, 2900 r/min Primary air fan Mercantile KDER 75, 37300 Nm3/h, motor 115 kW, 1500 r/min Sootblowers Diamond Superior sootblowers 4 pcs in boiler part Diamond Superior sootblowers 4 pcs in economizer. Dimensions of boiler part: Height 5,2 m, Width c. 4,5 m, Length 10,0 m Weight of boiler part c. 54 t. without water and accessories Weight of economizer c. 15 t. without water and accessories Boiler is suitable for gas operation by changing the burner. The boiler has been in operation only about 6.000 hours. Equipment for SaleGeneral Industry Textile Machinery Process Equipment Energy & Power Gas & HFO Boilers Wind Turbines.
Lead Smelting Rotary Furnace Lead smelting rotary furnace is widely used for the Lead paste smelting of Battery recycling plants all over the world. SM Industry have rich experience in providing complete system according to customer requirements, which includes: rotary furnace and filters. The rotary furnace is consist of furnace body, driving system, burner hole, off-gas holefilters. Equipment name:� Lead smelting rotary furnace Capacity:� 1~20Tons/batch Application:� Lead acid battery recyclers, Lead ore smelter, Secondary Lead smelters Raw material:� Lead paste from used battery, Lead ore, Lead dross, Lead slag, crude Lead, and other Lead containing materials Product: 98% purity crude lead Fuel: natural gas, heavy oil, petroleum coke Brick: Mg-Cr brick Burner: pyronics burner Motor and reducer: China famous brand motors and reducers Related equipment: battery crushing and separation system, Lead kettles, ingot casting machine, Lead ladles Advantages 1.Good adaptability. It can be used for the roasting and smelting for many type of materials, its capacity can tolerate 50-100% of changes. Comparing with reverberatory furnace, it has higher production energy rate and lower fuel consumption. 2.Small length-diameter ratio, small temperature difference, quick heat transferring, and uniform smelting temperature in the furnace. 3.High heat efficiency and good seal performance. 4.Furnace can rotate, which make the firebricks has a longer life service. 5.Good operation environment with high mechanization level and low labor intensity. 6.The rotating speed can be adjusted according to process requirements. 7.Fuel can be diesel, natural gas, gas, powdered coal, heavy oil, and so on. The gas after heat exchanger will enter surface cooler and then dust bag collector. We can provide customized service for you, you are warmly welcome to visit us!
Wood Pellet Burner PRODUCT FEATURE 1. Easy to operate and use, the machine adopts PLC control panel which can realize small fire-middle fire-big fire. Customize electrical components according to customers? requirements, there are domestic components and imported components available, we will offer free replace parts within one year because of quality problem. 2. The combustion furnace adopts 3-layer thermal insulation; the inner furnace adopts high aluminium refractory, anti-souring and high temperature resistance. Outside of the furnace, it uses water cooling system; make sure the furnace have long usage life, and operation more stable. 3. Pyrolysis and gasification through negative pressure, secondary combustion, smoke treatment system, eliminate the secondary pollution completely, up to European emission standard. 4. The product working principle adopts ultra-low nitrogen combustion technology, multiple air increasing, high temperature pyrolysis, semi-gasification suspension combustion, use heat convection and radiation at the same time, combustion last for more than 2 seconds, high-speed combustion and no dead corner. 5. High thermal conversion efficiency, heat efficiency can reach 80%-85% generally, stable continuous operation, easy to operate and maintenance. 6. Well sealing measures an d negative pressure furnace, ensure no gas leakage. APPLICATION SCOPE 1. Fuel gas/oil/coal boiler industry (Steam boiler, thermal oil furnace, hot water boiler) 2. Smelting Industry (Aluminium melting furnace, reverberator furnace) 3. Drying Industry (Food drying, sawdust/wood chips/biomass drying) 4. Spray Coating Industries (Metal spraying, electroplating heating) 5. Greenhouse, Building Industry (Asphalt heating)
We use superior quality raw material and metal in the fabrication process of Spring Loaded Safety Valves and Water Safety Relief Valves. Latest design methodologies are employed to give rise to flawless ASME Safety Relief Valves and Leser Type Safety Relief Valve. To automatically abandon a pressure vessel or a system automatically, our pressure safety valves are employed. Similarly a Boiler safety valve releases a boiler. On the other hand, our Steel Safety Relief Valves automatically open from a liquid vessel when there is an increase in the pressure level. As our Alloy Steel Plug Valves and Aluminium Plug Valves exhibit properties like corrosion resistance, toughness, and durability, they are exported to many other countries across the world. We manufacture Brass Safety Valves and Bronze Safety Relief Valves in all the national and international standards. We also provide special offers for our products which are available in our official website. Complete information about all the products is also provided. In case of any queries, feel free to contact us. With no more ado, place your order right now. ASME Safety Relief Valve, Water Safety Relief Valves, Boiler Safety Valve, Pressure Safety Valves, Lesser Type Safety Relief Valve Dealer & Wholesaler ANSI/ASME B16.10 Safety Valves Specifications: Size �½â?? to 4â?? (15 mm to 100 mm) Pressure Rating 150#, 300#, 600# Design Standard Self Actuating, Full Lift, Spring Loaded. MOC Cast Iron, Cast Steel, SS 304 / 316, SS 304L / 316L, Gunmetal etc. End Connection Screwed, Flanged End Safety Relief Valves, Safety Relief Valves Widely Used For Steam Boilers, Steam Services, Compressors, Receivers, Burners, Dryers and other Piping Systems and Many More
Description poultry house thermal oil heater products series Oil/gas heaters(Diesel or kerosene) 1. DH series(Output heat 23KW or 43KW) The burning heat was blowed out directly. Used in construction site or small industrial workshop, for temporary heating or drying. Can also be used in chicken brooding and pig conservation. DH25PV have a heat exch anger and a chimney, to exhaust tail gas. 2. Tornado series(Output heat 66KW or 115KW) This series have a special fan, can get oxygen from outside through vent and pipe. This can make burning more stable. 3. Mirage series(Output heat 36KW or 53KW or 84KW) This series have Oxygen fan can get oxygen from outside, and efficient heat exchanger, this can exhaust tail gas, making blow hot airs clean. Our special design is the air outlet have a baffle in no wind area, make outlet air strong, can blow further through the air-discharge pipe. 4. Helios series(Output heat 140KW/145KW/174KW/195KW) Helios using the isolated independent burner, burn oil or gas. Burning chamber is multipass exchange heat, the highest heat effiency, exhaust tail gas the same time. Our burner using the Riello(Italy brand) burner, more durable. Feature of the diesel fuel heater : 1. Robust and tough design 2. Function on diesel oil or kerosene 3. Stainless steel combustion chamber with fan cooling 4. Durable external powder coating 5. With flame sensor 6. If no oil , heater will cut off the power 7. Fixed Oil display 8. Cut-off protection,re-plugged in will not work automatically 9. Low pressure atomization,combustion completely 10. Waterproof class IPX4 11. With P.C.panel to smart setting temperature 12. Easy maintenance 13. Ideal for heating warehouses, factories and workshops