Temperature Module Hart

Product Overview NCS-TT106 smart temperature module, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control. Features Support multiple thermal resistance and thermocouples Thermal resistance supports 2/3/4-wire connection mode Thermocouple can use cold end compensation function Better accuracy: PT100 ±0.3 ; K-type ±0.4 Universally programmable for various input signals Available protocols: HART /FF H1 /PROFIBUS PA Parameter Value Input Signal Resistance: PT100, CU50, CU100, 0~500Ω, 0~4000Ω Thermocouple: B, E, J, N, K, R, S, T Voltage signal: -100mV~100mV Channel Single RTD Wiring 2-wire, 3-wire, 4-wire Bus Power 9~32 VDC Current consumption (static): â?¤14mA Bus Signal Communication ratio 31.25Kbit/s, current mode Isolation Between terminal and housing: 1kV Working Temperature -40~85 Humidity Range 10%~90%RH Start Time â?¤5s Refresh Time 0.5s EMC GB/T 18268-2000 Protection IP20 Signal Type Suggested Range () Accuracy Resistance 0~500Ω,0~4000Ω ±0.05% PT100 -200 ~ 850 ±0.2 PT1000 -200~ 850 ±0.1 CU50 -50 ~ 150 ±0.3 CU100 -50 ~ 150 ±0.2 mV -100mV ~ 100mV 0.05% B 500 ~ 1810 ±1.0 E -200 ~ 1000 ±0.4 J -190 ~ 1200 ±0.4 K -200 ~ 1372 ±0.4 N -190 ~ 1300 ±0.8 R 0 ~ 1768 ±1.0 S 0 ~ 1768 ±1.0 T -200 ~ 400 ±0.4

MS182 is a smart in-head transmitter module with HART® -protocol. It has measurement input for resistance Thermometers (RTD), thermocouples, resistance or millivolt signals in 2-, 3- or 4-wire connection, and converts various input signals into a standard 4 to 20 mA analog output signal after linear processing. The transmitter is programmable directly from PC or via the HART communication. Isolation is provided between the input and output. A special signal can be set in advance while the sensor burnout or short. Primary Technical Characteristics Programmable Use PC or the hand operator Measuring range Set via PC or by the hand operator Input type RTD, TC, R or Millivolt signal Convert accuracy 0.1£¥FS Cold junction accuracy ¡À1(TC) Output 4¡«20mA/20¡«4mA Electrical isolation output HART ¨CProtocol output Max-load £¨V -13V£©/0.025A£¨Current output £© Limit current 25mA Response time 1s Isolated voltage 1500V AC (input/output) Alarm signal Programmable Underranging linear drop to 3.8 mA Overranging linear rise to 20.5 mA Sensor break or short-circuit: 3.6mA or ¡Ý21.0mA Power supply 13¡«30V DC Temperature drift 0.01£¥ FS/1 Long-term stability 0.1 per year or 0.05 £¥per year Ambient -40¡«+85.

MS181 is an intelligent temperature transmitter module which can be programmed through a PC with Configuration Kit. It has measurement input for resistance thermometers (RTD) ,thermocouples, resistances or millivolt signals in 2-,3- or 4-wire connection, and converts various input signals into a 4~ 20mA analog output signal after linear processing. Isolation is provided between the input and output. A special signal can be set in advance while the sensor burnout or short. Primary Technical Characteristics Programmable Use the MS181 programming tool Measuring range Set via PC PC Interface USB/RS232 Input type RTD, TC, R or Millivolt signal Convert accuracy ¡Ü0.1£¥FS Cold junction accuracy ¡À1(TC) Output 4¡«20mA/20¡«4mA Electrical isolation output Max-load £¨V -8V£©/0.025A£¨Current output £© Limit current ¡Ü25mA Response time 1s Isolated voltage 1500V AC (input/output) Alarm signal Programmable Underranging linear drop to 3.8 mA Overranging linear rise to 20.5 mA Sensor break or short-circuit: ¡Ü3.6mA or¡Ý21.0mA Power supply 8¡«30V DC Temperature drift 0.01£¥ FS / 1 Long-term stability ¡Ü0.1 per year or 0.05£¥ per year Ambient -40¡«+85

MS183 , a smart 2-wire in-head and dual-input transmitter module with HART® -protocol, has measurement input for resistance Thermometers (RTD), thermocouples, resistance or millivolt signals in 2-, 3- or 4-wire connection and converts various input signals into a standard 4 to 20 mA analog(high selector, average value or D-value) output signal or 2-way digtal output signals with HART® -protocol after linear processing. The transmitter is programmable directly from PC or via the HART communication. Isolation also is provided between the input and output. A special signal can be set in advance while the sensor burnout or short. Primary Technical Characteristics Programmable Use PC or the hand operator Measuring range Set via PC or by the hand operator Input type Dual-input ( RTD, TC, R or Millivolt signal) Convert accuracy ¡Ü0.1£¥FS Cold junction accuracy ¡À1¡æ(TC) Output 4¡«20mA/20¡«4mA Electrical isolation output HART ¨CProtocol output (2-way) Max-load £¨V -16V£©/0.025A£¨Current output £© Limit current ¡Ü25mA Response time 1s Isolated voltage 1500VAC (input/output) Alarm signal Programmable Underranging linear drop to 3.8 mA Overranging linear rise to 20.5 mA Sensor break or short-circuit: ¡Ü3.6mA or ¡Ý21.0mA Automatic switching while sensor damaged Power supply 16¡«30V DC Temperature drift 0.01£¥ FS/1¡æ Long-term stability ¡Ü0.1¡æ per year or 0.05 £¥per year.

• Universal PC programmable (PCP) • 2 wire technology, 4 to 20 mA analogue output • High accuracy in total ambient temperature range • Configuration during measurement using configuration kit • Customer specific measurement range setting • Wide measurement range, according to requirement Field of application • PC programmable (PCP) Temperature head transmitter for converting the input signal into a standard 4 to 20 mA analog output signal • Input: Resistance thermometer (RTD) Pt100 • Configuration using a PC with MS180 configuration kit (MS180-PC). Appearance and Size (in mm) NOTE: When order, please specify the measuring range, we’ll offer programming tool if needed.

Humidity and temperature sensor module 1. General mhtc1a humidity and temperature sensor module is designed base capacitive humiture sensor by ningbo junrong electron. This product utilizes humidity sensor capacitor and temperature sensor (lm35, america), with characteristics of stable, high accuracy, quick response, good crossing-over and it also use craftwork of smd, and so own extremely small body, stable and reliably performance. The quality guarantee time is 12 months. 2. Application electron, pharmaceutical industry, food processing, warehouses, tobacco, textile, weather, libraries and museum. 3. Shape model encapsulation shape mhtc1a humidity and temperature sensor module without shell detail to the picture 4. Model there are three models according to with or without temperature and humidity sensor. Mhc1a humidity measuring module, without temperature element mhtc1a1 temperature and humidity measuring module, with ntc resistance mhtc1a2 temperature and humidity measuring module, with lm35 temperature sensor 5. Specification (1) power supply (vin) dc 5vf+5% (2) electrical current 2ma (max 5ma) (3) temperature operating range 0 ~ 70fª (4) humidity operating range 0 ~ 100%rh (dew point) (5) humidity measuring range 2 ~ 99%rh (6) temperature storing range -20 ~ 85fª (7) humidity storing range under 95%rh (no dew point) (8) humidity measuring accuracy mhtc1a f+3%rh ( at 25fª, 60%rh ) 24.5*13.5*17mm

Humidity and temperature sensor module Specification (1) power supply (vin) dc 5vf+5% (2) electrical current 1.9ma (max 5ma) (3) temperature operating range 0 ~ 50fª (4) humidity operating range under 95%rh (5) humidity measuring range 30 ~ 90%rh (6) temperature storing range 0 ~ 70fª (7) humidity storing range lower 95%rh (8) humidity measuring accuracy f+5%rh ( at 25fª, 60%rh vin=5.0v 1.65`1.95v ) (9) typical humidity data responding to output 24.5*13.5*17mm

MHTC1A humidity and temperature sensor module 1. General MHTCA module humiture sensor is designed base capacitive humiture sensor by Ningbo Junrong Electron. This product utilizes humidity sensor capacitance and temperature sensor (LM35, America), with characteristics of stable, high accuracy, quick response, good crossing-over and it also use craftwork of SMD, and so own extremely small body, stable and reliably performance. The quality guarantee time is 12 months. 2. Application Electron, pharmaceutical industry, food processing, warehouses, tobacco, textile, weather, libraries and museum. Specification (1) Power supply (vin) DC 5V+-5% (2) Electrical current 2MA (max 5mA) (3) Temperature operating range 0 ~ 70 (4) Humidity operating range 0 ~ 100%RH (dew point) (5) Humidity measuring range 2 ~ 99%RH (6) Temperature storing range -20 ~ 85 (7) Humidity storing range under 95%RH (no dew point) (8) Humidity measuring Accuracy MHTC1A 3%RH ( at 25, 60%RH ) (9) Temperature testing feature MHTC1A2 +-1(LM35 integrated temperature sensor) MHTC1A1 +-1% 10K 3950 resistance (10) Temperature dependence (reference) +-2%RH (5.00V DC, 0-100%RH, at 25, 0-50) (11 Voltage dependence (reference) under +-3%RH (12) measure: 21.6*33.5*10mm

MHTR1D humidity and temperature sensor module 1. MHTR1D humiture measuring module is designed by Ningbo Junrong Electron. This product with characteristics of stable, best price, good crossing-over and with temperature retrieves performance. It is also ideal to measure temperature and humidity in air-conditioning, dehumidistat, humidistat. 2. Application Air-conditioning, dehumidifier, humidifier, Electron, pharmaceutical industry, food processing, warehouses, tobacco, textile, weather, libraries and museum. 3. Specification (1) Power supply (vin) DC 5Vincrease or decrease5% (2) Electrical current 1.9MA (max 5mA) (3) Temperature operating range 0 ~ 50 (4) Humidity operating range under 95%RH (5) Humidity measuring range 20 ~ 95%RH (6) Temperature storing range 0 ~ 70 (7) Humidity storing range lower 95%RH (8) Humidity measuring Accuracy 5%RH (at 25, 60%RH vin=5.0V 1.65 1.95V ) (9) Typical humidity data responding to output (10) measure: 21.6*33*8mm