Cable Harness Probe Pogo Pin CH136-J for the Tests of Automotive Industry
Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc.
The CH136 harness probe we will introduce here is 1.36 mm in diameter and 33 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel.
This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 50 milliohms. It is suggested the plunger be pressed at a distance of 5.3 mm at most when this probe works, although the plunger can move as far as 8 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 5.3 mm, its loaded force is about 57 gf, namely 2 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance.
Technical Specifications
Recommended
Current Rating: 3 Amps, continuous
Contact Resistance: 50 milliohms
Full Stroke: 8 mm
Rated Stroke: 5.3 mm
Spring Force: 57±17 gf (2 oz) at load 5.3 mm
Materials (plated)
Barrel: Brass, Au on Ni Plated
Plunger: BeCu, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Company Information
Centalic Technology Development Ltd. was founded in 1980.Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Supplier: Rapid detection kit, ribonucleic acid detection reagent, medical syringes, medical mask, medical ventilator, medical glove, medical isolation gown, surgical gown level 3+4, protective gown (overall ), oximeter, other medical products
Cable Harness Probe Pogo Pin CH136 for the Tests of Automotive Industry Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CH136 harness probe we will introduce here is 1.36 mm in diameter and 33  mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel. This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 50 milliohms. It is suggested the plunger be pressed at a distance of 1.67  mm at most when this probe works, although the plunger can move as far as 2.5  mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 1.67 mm, its loaded force is about 140  gf, namely 5  ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms Full Stroke: 2.5 mm Rated Stroke: 1.67 mm Spring Force: 140 ±40 gf (5 oz) at  load 1.67 mm Materials (plated) Barrel: Brass, Au on Ni Plated Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Company Information Centalic Technology Development Ltd. was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Welcome to browse our website and download any catalogs of our products. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal
Warranty: 2 years After-sale Service: Online technical support Material: metal Shelf Life:2 years Instrument classification:Class II Safety standard: none Application: Cardiology
One Touch Ultra Test Strips are for use with the One Touch Ultra and OneTouch UltraSmart Meters for quantitatively measuring glucose in whole blood. Fast test time of 5 seconds. OneTouch Ultra Test Strips are for blood glucose testing with the OneTouch Ultra Family of Meters, and the InDuo Systems. Tiny blood sample (1 microlitre) End-fill strip automatically draws in blood Indicator window shows when you have enough blood Touchable strip Easy-open flip-top vial for use with the One Touch Ultra brand and InDuo meters only.
This recertified Medical MD Oxygen Cylinder is perfect for professional or personal home oxygen use. With a 14.6 cu ft capacity,this medical oxygen cylinder is perfect for portability and smaller spaces. This lightweight, easy to transport aluminum requalified cylinder is DOT approved, and ready for medical or industrial use. It comes fitted with a CGA870 post valve installed and a freshly painted dome in a Medical Green color for easy identification. PREMIUM CONSTRUCTION Reconditioned High-quality aluminum body Clearcoat protected Medical green rust-resistant painted dome CGA870 medical post valve installed Approximately 4.4â?³ in diameter x 16.3â?³ in height* (with valve) Weighs approximately 6 pounds Capacity 14.6 cubic foot 2015 PSI service / 3360 PSI test pressure Stamped DOT-3AL2015 5-year retest interval Recertified test within 180 days prior to shipment
Harness Probe Pogo Pin CH136 Series for the Tests of Automotive Industry Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CH136 harness probe we will introduce here is 1.36 mm in diameter and 33 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel. This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 50 milliohms. It is suggested the plunger be pressed at a distance of 2.67�?� mm at most when this probe works, although the plunger can move as far as 4�?� mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 2.67�?� mm, its loaded force is about 185�?� gf, namely 6.5 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms Full Stroke: 4 mm Rated Stroke: 2.67 mm Spring Force: 185 ±55 gf (6.5 oz) at  load 2.67 mm Materials (plated) Barrel: Brass, Au on Ni Plated Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Company Information Centalic Technology Development Ltd. was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Welcome to browse our website and download any catalogs of our products. �?� Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal
ECG cables also referred to as an ECG patient cable, is a type of cable connection designed for non-invasive heart monitoring, typically used to help diagnose potential heart issues. The ECG cable connects to electrodes which are positioned at specific locations on the patientâ??s body to detect and record heart muscle electrical activity. The cables then transmit the electrical activity back to the ECG device for analysis and diagnosis by medical professionals. ECG Cable Feature [Multiple Leads]: ECG cables usually have several leads placed in specific areas on the patientâ??s body, such as the chest, arms, and legs, to measure the heartâ??s electrical activity from different angles. [Durability]: ECG cables are constructed from top-quality, sturdy materials that can endure repeated bending, tugging, and twisting without sustaining any damage. This ensures that the cables can withstand the rigors of frequent use and remain reliable over time. [Shielding]: ECG cables are shielded to block out external electrical signals, which can interfere with the accuracy of the readings. [Connector Compatibility]: The ECG cables are available with various connector types, including snap, clip, and banana, to fit different types of ECG machines. [Safety]: ECG cables are designed to meet strict safety standards and regulations to ensure patient safety. This helps to ensure that patients are protected from any potential harm during the monitoring process. [Cleaning and Disinfecting]: The ECG cables are easy to clean and disinfect to maintain hygienic conditions, as they come into contact with the patientâ??s skin. ECG Cable Advantages [Excellent Performance]: ECG cables are built to withstand the rigors of twisting and bending, and have been thoroughly tested to ensure optimal performance. The cables are also equipped with electrical shielding to protect the signal integrity, ensuring accurate readings. [Non-Invasive]: ECG cables are non-invasive, which means that they do not require any incisions or invasive procedures. This reduces the risk of infection and makes the monitoring process much safer for patients. Instead, the cables are simply attached to the patient's skin, making it a quick and painless process.
customized medical grade PVC, TPU, silicone catheter, Tube
Wholesale Accu Chek Aviva Test Strips - 50 Contact now for more details Serious inquiries only, please
