Electronic Test Probe Double-ended Pogo Pin SCPE025 Series for IC Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPE025 we will introduce is 0.25 mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold or gold clad phosphor bronze. The bottom plunger is made from SK4 plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 0.5 Amp. The typical maximal contact resistance is about 250 milliohms.
The plunger can be pressed at a distance of up to 1.9 mm. But it is better to be pressed at a distance of 1.25 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 1.25 mm, the loaded force is about 12 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel: Phosphor Bronze/ Gold Clad Phosphor Bronze, Au on Ni Plated
X: Bottom (Plunger 1): SK4, Au on Ni Plated
Y: Top (Plunger 2): SK4, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Electronic Specification:
Current Rating: 0.5 amp
Contact Resistance: 250 milliohms max
Bandwidth: 10.8 GHz at -1dB
Inductive Reactance: 1MHZ at -0.07234 uH
Capacitive Reactance: 1MHZ at 0.329458 uF
Specifications:
Full Stroke: 1.9 mm
Rated Stroke: 1.25 mm
Spring Force: 12 �±4 gf at load 1.25 mm
Mechanical Life: about 100000 cycles
Company Information:
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Supplier: Rapid detection kit, ribonucleic acid detection reagent, medical syringes, medical mask, medical ventilator, medical glove, medical isolation gown, surgical gown level 3+4, protective gown (overall ), oximeter, other medical products
Warranty: 2 years After-sale Service: Online technical support Material: metal Shelf Life:2 years Instrument classification:Class II Safety standard: none Application: Cardiology
One Touch Ultra Test Strips are for use with the One Touch Ultra and OneTouch UltraSmart Meters for quantitatively measuring glucose in whole blood. Fast test time of 5 seconds. OneTouch Ultra Test Strips are for blood glucose testing with the OneTouch Ultra Family of Meters, and the InDuo Systems. Tiny blood sample (1 microlitre) End-fill strip automatically draws in blood Indicator window shows when you have enough blood Touchable strip Easy-open flip-top vial for use with the One Touch Ultra brand and InDuo meters only.
This recertified Medical MD Oxygen Cylinder is perfect for professional or personal home oxygen use. With a 14.6 cu ft capacity,this medical oxygen cylinder is perfect for portability and smaller spaces. This lightweight, easy to transport aluminum requalified cylinder is DOT approved, and ready for medical or industrial use. It comes fitted with a CGA870 post valve installed and a freshly painted dome in a Medical Green color for easy identification. PREMIUM CONSTRUCTION Reconditioned High-quality aluminum body Clearcoat protected Medical green rust-resistant painted dome CGA870 medical post valve installed Approximately 4.4â?³ in diameter x 16.3â?³ in height* (with valve) Weighs approximately 6 pounds Capacity 14.6 cubic foot 2015 PSI service / 3360 PSI test pressure Stamped DOT-3AL2015 5-year retest interval Recertified test within 180 days prior to shipment
Fresenius fx8 dialyzer is a part of FX Series dialyzer. Its a single use dialyzer. Fx8 Dialyzer are based on optimized and redefine handling. There are several high end technologies have been combined to provide the distinctive functional feature of FX dialyzer. The structure of fibre bundle, membrane ,flow port and housing design provide the performance of the dialyzer along with safety and handling. The optimal membrane permeability design gives minimal loss of blood components. It gives homogeneous blood flow inside the dialyzer.
Wholesale Accu Chek Aviva Test Strips - 50 Contact now for more details Serious inquiries only, please
Contour Next Glucose Test Strips - 50 available Contour Next Glucose Test Strips - 50
Double-ended Pogo Pin Test Probe SCPA058 Series for Semiconductor Inspection Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc. SCPA058 series is a medium-sized one in all semiconductor test probes. Both plungers are movable. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production. Its parameters are as below. Materials (plated) Barrel: Phosphor Bronze, Au on Ni Plated Bottom Plunger: Beryllium Copper, Au on Ni Plated Top Plunger: Beryllium Copper, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Electronic Specification: Current Rating: 3.5 Amps Contact Resistance: 100 milliohms, max Bandwidth: 8.5 GHz at -1dB Propagation Delay: 21 ps Inductive Reactance: 1MHZ at -0.02506 uH Capacitive Reactance: 1MHZ at -1.01245 uF Specifications: Full Stroke: 1.1 mm Rated Stroke: 0.65 mm Spring Force: 25�±7 gf at load 0.65 mm Mechanical Life: about 200000 cycles Company Information: Centalic Technology Development Ltd. was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Double-Ended Pogo Pin Test Probe SCFB029(40) for Chip Inspection Semiconductor test probes are usually called double-ended pogo pins � Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc. SCPB029(40) is unique in shape among semiconductor test probes due to a convex ring at one end of its barrel. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. � Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production � Its parameters are as below. Materials (plated) Barrel: Phosphor Bronze, Au on Ni Plated Bottom Plunger: Beryllium Copper, Au on Ni Plated Top Plunger: SK4, Au on Ni Plated Spring: SWP-A/B, Au on NI Plated Electronic Specification: Current Rating: 2 amps Contact Resistance: 100 milliohms max Bandwidth: 8.5 GHz@-1dB Inductance: 1MHZ@-0.02661uH Captance: 1MHZ@0.925374uF Specifications: Full Stroke: 1 mm Rated Stroke: 0.65 mm Spring Force: 14 �±4 gf@load 0.65 mm Mechanical Life: about 100000 cycles Company Information: Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal
