Nimrof AT550 water leak detection device , make point determination of dirty and clean water leaks in water pipe lines , the device has two seperate sensors, one is acoustic listening which helps to find clean water pipe network leaks. The other is 2 metal electrodes that find the drain water leaks. �?�±t will be shown on a LCD screen.
Application Fields:
Drainage of Water
Waste water, Pipe Line Leaks
Central Heating System Leaks
Isolation Leaks
Internal and External Leaks
Natural Gas Leaks
Soil Floor Leaks
Supplier: Electronic curve tracer and water leak detection devices
Nimrof TARZ27-TFT Electronic Fault Locator is designed to complement conventional test instruments in the debug and troubleshooting process. Nimrof TARZ27-TFT Curve tracer is suited for todays varied signal circuit cards where Analog and Digital are mixed together. It provides to find faulty component on the electronic board in a short time by using power-off test method. Nimrof TARZ27-TFT Curve tracer allows more than 10 various voltage combinations, it operates by applying a low current AC signal to two points of electronic equipment. The current flow appear a vertical signature deflection, while the applied voltage appear a horizontal deflection. Together they form a unique V/A signature that represents the overall health of the device under test. Analyzing the signature can quickly determine whether the component is good, bad, or marginal.
Nimrof TARZ27 Electronic Fault Locator is designed to complement conventional test instruments in the debug and troubleshooting process. Nimrof TARZ27 Component tester is suited for todays varied signal circuit cards where Analog and Digital are mixed together. It provides to find faulty component on the electronic board in a short time by using power-off test method. Nimrof TARZ27 Curve tracer allows more than 10 various voltage combinations, it operates by applying a low current AC signal to two points of electronic equipment. The current flow appear a vertical signature deflection, while the applied voltage appear a horizontal deflection. Together they form a unique V/A signature that represents the overall health of the device under test. Analyzing the signature can quickly determine whether the component is good, bad, or marginal.
pellet machine, with the advantages of low noise, easy and stable operation, high automation, can make pellet dia size from 6mm to 12 mm and the output capacity from 1.5t/h to 2.5t/h. We can offer you the complete solution for making pellets, from crushing, drying to pelletizing. Features : 1. This machine adopts gear first stage driving system, with ideal drive ratio and enormous driving force, its transmission us stable with low noise, operate simply, no blocking is happened to the machine easily. 2. The maximize design if pinch roller can lower the requirement to moisture content of materials in particle molding. 3. The motor and gear cases are installed at the heavy pedestal, pin coupling is used to realize direct connecting, which can exempt from foundation installation and easy to repair and maintain. 4. The machine is equipped with patented water circulation; the cooling system can be used to control the temperature rising of each part efficiently, to guarantee the continuous, stable, reliable running of the machines. 5. The machine adopts advanced variable frequency motor to feed, which equipped with overload intelligent protection.
Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter
1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
Leak Detector and Seal Strength Tester is suitable for the quantitative measurement of sealing strength, heat sealing strength, binding strength, overall sealing performance, pressure resistance strength, cap body connection strength, bursting pressure and shedding strength. It is widely used in the soft package, plastic pilfer-proof caps, flexible pipes, etc. Features A.Compatible with international standards of GB, ASTM, ISO. B.Positive-pressure test method, easy to operate, stable and reliable performance. C.Wide test range for different applications. D.Dual test methods of restraint distension and unrestraint distension for customer's choice E.Different test modes of burst, creep and creep to failure to meet different test requirements. F.The "one key" operation in the test process is intelligent and efficient. G.Touch interface. Automatic statistics and printing of test data. H.Standard USB interface,software supports test results of multiple units display. I.The test data can be shared between LAN and Internet. Principle Positive-pressure method: after the gas with certain pressure fills into the specimen with setting parameters, the pressure sensor detects the change of air pressure inside the specimen� to judge the overall sealing performance of the specimen, and tests the pressure resistance and bursting performance of the specimen with the specified air pressure. Standards ASTM F1140, ASTM F2054, ISO 11607-1, ISO 11607-2, GB/T 10440, GB/T 18454, GB/T 19741, GB 17447, GB/T 17876, GB/T 10004, GB/T 10005, BB/T 0003, BB/T 0025, QB/T 1871, YBB 00252005, YBB 00162002 Technical Specifications Test Range 0 ~ 600 KPa; 0 ~ 87.0 psi (Standard) 0 ~ 1.6 MPa; 0 ~ 232.1 psi (Optional) Pressure of Air Source 0.4 MPa ~ 0.9 MPa (outside of supply scope) Air Connection 8 mm PU Tubing Dimension 300mm(L) x 310mm(B) x 180mm(H) Power Supply AC 220V 50Hz Net Weight 23 kg Configurations Standard: Instrument, Test Plate, Micro-Printer Optional: Professional Software and Communication Cable, Test Accessories (restraint plate test device: open package plastic anti-theft bottle cap sealing performance hose sealing performance; aerosol valve sealing performance) Note: 1. The gas supply port of the instrument is 8 mm PU Tubing; 2. Customers need to prepare for gas supply.
Basic information: 1.Molecular formula: Co3O4 2.Molecular weight: 240.797 3.CAS No.: 1308-06-1 4.Purity: Co:72%min 5.Storage: Keep the receptacle sealed and stored in a cool and dry place, and ensure that the working room has good ventilation or exhaust device. Cobalt Tetroxide is similar to ferroferric oxide, and can be approximately regarded as a compound formed by cobalt oxide (CoO) and cobalt oxide (Co2O3). Black or grayish black powder. The apparent density is 0.5-1.5g/cm3, and the tap density is 2.0-3.0g/cm3. Cobalt Tetroxide can be slowly dissolved in hot sulfuric acid, but it is insoluble in water, n itric acid and h ydrochloric acid at room temperature. When heated above 1200 C, it will decompose into cobaltous oxide. When it is strongly heated to 900C in a hydrogen flame, it is reduced to metal cobalt.
PQWT-L7000 Hand held Outdoor & Indoor underground water leak detection device water pipe damage heating leakage detection Multi-sensor outdoor and indoor pipeline leak detection series, a new generation of intelligent leak detection equipment independently developed by Hunan Puqi Geological Exploration Equipment Institute, specifically for leaking pressure pipes. It is suitable for water leakage detection of outdoor water pipe, fire pipe, heating system, indoor water pipe and underground heating floor pipe. By collecting and analyzing leakage signal, it can locate the water leakage position and solves the problem of pressure pipe water leak. 1. Smart water leak detector built-in high-sensitivity detection sensor. 2. Multi-function leakage detection of indoor and outdoor water pipe. 3. dual mode to locating the most potential leaking area. 4. Different sensors for different detection needs. 5. Locating results picture can be exported for your professional report making. 6. Free online technical guidance and support.
