Acetone Formaldehyde Sulfonate

Sodium naphthalene formaldehyde is high range water-reducing and an anion surface active agent based on polyalkyaryl- sulphonate.
Technical spefication:
Solid content 92% min
Moisture 8.0 % max
Fineness 5.0% max
Ph value 7 - 9
Chlorides content 2.0% max
Surface tension 68-72 mn/m
Cement flowing rate 230mm min
Concrete reducing water rate 18% min
Sodium sulfate content 18% max (5%max is also available)
Sodium naphthalene formaldehyde produces concrete with extremely workable characteristics referred to as high slump. Pns also allows concrete to be produced with very low water/cement ratios at low or normal slumps.Sodium naphthalene formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation.
Addition ratessodium naphthalene formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%.Sodium naphthalene formaldehyde directionprepare solutions as required.Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%).The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds.

Packed in plastic film bag wrapped with plastic woven sack with a net weight of 25kg each.

Poly naphthalene sulfonate formaldehyde is high range water-reducing and an anion surface active agent based on polyalkyaryl- sulphonate.
Technical spefication:
Solid content 92% min
Moisture 8.0 % max
Fineness 5.0% max
Ph value 7 - 9
Chlorides content 2.0% max
Surface tension 68-72 mn/m
Cement flowing rate 230mm min
Concrete reducing water rate 18% min
Sodium sulfate content 18% max (5%max is also available)
Poly naphthalene sulfonate formaldehyde produces concrete with extremely workable characteristics referred to as high slump. Pns also allows concrete to be produced with very low water/cement ratios at low or normal slumps.Poly naphthalene sulfonate formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation.
Addition ratespoly naphthalene sulfonate formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%.Poly naphthalene sulfonate formaldehyde directionprepare solutions as required.Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%).The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds.

Packed in plastic film bag wrapped with plastic woven sack with a net weight of 25kg each.

Chemical name: Potassium Perfluorobutane Sulfonate
CAS NO.: 29420-49-3
Molecular Formula: C4F9KO3S
Molecular Weight: 338.19
Appearance: White powder
Assay: 99.0%min

Physical properties:
Anion surfactant, it has general properties of fluoro surfactant.
It is non corrosive and non flammable, soluble in water, acetone, methanol, ethyl acetate.

Application:
It is a kind of perfluoro anion surfactant and has the general characters fluor surfactant processing. It is widely used as inflaming retarding for synthetic materials, especially the best fire retardant.
for polycarbonate.

For Feed grade
as a new feed additive. Feeding calcium formate to gain weight, using calcium formate as feed additive for piglets
For Construction
Industry grade is used in construction. Rapid setting agent, lubricant, early strength agent for cement

Sodium Naphthalene Formaldehyde (SNF-Superplasticizer for Concrete)
CAS Code: 36290-04-7
SNF a high range water reducer, commonly referred to as a super plasticizer, also named Naphthalene Sulphonate Formaldehyde Condensate (short name: SNF, PNS, NSF, etcâ?¦)
SNF is made from naphthalene, sulfuric acid, formaldehyde and liquid alkali, through sulfonation, hydrolyzation, condensation and neutralization reaction and then drying to powder. SNF-A5% contains very small chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-2008 and GB50119-2003.
Usage
SNF produces concrete with extremely workable characteristics referred to as high slump.
SNF also allows concrete to be produced with very low water/cement ratios at low or normal slumps.
SNF is ideal for use in pre stress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation.
SNF will also fluidize concrete, making it ideal for tremie concreting or other applications where high slumps are desired.
SNF is compatible with Portland Cement, Normal Portland cement, Portland Slag Cement, Fly-ash Cement, Portland Pozzolanic Cement, etc.

Chemical name: Potassium Perfluorobutane Sulfonate
CAS NO.: 29420-49-3
Molecular Formula: C4F9KO3S
Molecular Weight: 338.19
Appearance: White powder
Assay: 99.0%min

Physical properties:
Anion surfactant, it has general properties of fluoro surfactant.
It is non corrosive and non flammable, soluble in water, acetone, methanol, ethyl acetate.

Application:
It is a kind of perfluoro anion surfactant and has the general characters fluor surfactant processing. It is widely used as inflaming retarding for synthetic materials, especially the best fire retardant.
for polycarbonate.

1,3 Dichloro acetone
2. 4-Amino-1,2,4-triazole
3. 2 Mercapto 5 Methoxy Benzamedazole
4. 3 chloro propionyl chloride
5. 5 Chloro Valeryl Chloride
6. Acetyl chloride
7. Benzoyl chloride
8. Chloro acetyl chloride
9. Propionyl chloride
10. Pivaloyl Chloride
11. Para chloro benzoyl chloride
12. Boron trifluoride diethyl etherate
13. 2-chlorothiophene
14. Thiophene-2-aldehyde
15. 2,5-Dichlorothiophene
16. 2-Bromothiophene
17. 2-Methyl resorcinol
18. Thiophene 99%
19. 5-Chlorothiophene-2-carboxylic acid (Rivaroxaban Intermediate)
20. 2-Butyl-4-chloro-5-formyl-1H-imidazole (BCFI) (Losartan Intermediate)
21. Cyanuric chloride
22. Benzamidine HCL
23. Glucono Delta Lactone
24. Biphenyl
25. D (-) Tartaric acid
26. L (+) Tartaric acid
27. Cyanoacetic acid 70%
28. Benzylamine
29. 2,6-Diaminotoluene
30. Meta chlorotoluene
31. Di cyclohexylamine (DCHA)
32. 1,2 Dimethoxy ethane (Monoglyme)
33. 2 Methyl THF
34. Acetonitrile
35. Resorcinol
36. 1,4 Dioxane
37. Ethyl bromide
38. N Heptane
39. Diisopropylethylamine (DIPEA)
40. Di isopropyl ether (DIPE)
41. Diisopropylamine (DIPA)
42. Dimethylformamide (DMF)
43. N, N bis(2-chloroethyl) amine HCL
44. Tetra isopropyl titanates (TIPT)
45. Titanium isopropoxide
46. Titanium tetrachloride
47. Tert n butyl titanates
48. Poly butyl titanates
49. Titanium phosphate
50. Tetra octyl titanates
51. N-methyl-2-pyrrolidone (NMP)
52. Tetrahydrofuran (THF)
53. Triethylamine (TEA)
54. N N Dimethyl Acetamide (DMAC)
55. Iso Propyl Acetate (IPAC)
56. Chloro sulfonic acid
57. Ortho nitro chlorobenzene (ONCB)
58. Para nitro chlorobenzene (PNCB)
59. Niacin (Nicotinic acid)
60. Niacinamide (Nicotinamide)
61. Meta Chloro Anisole
62. Meta Bromo Anisole
63. Dibenzoyl-L-tartaric acid monohydrate

OTHER PRODUCTS:
1. N pentane
2. Paraformaldehyde 96%
3. Propionaldehyde
4. Piperdine
5. Piperazine anhydrous
6. Pyridine
7. Sodium borohydride powder
8. Sodium metal
9. Sulphuryl chloride
10. Thionyl chloride
11. 1,2-dichloro ethane (EDC)
12. 1,3-dichloro acetone
13. 2,2-dimethoxy propane
14. 4-chlorobenzophenone
15. Alpha picoline
16. 2-bromobutane
17. Benzenesulfonylchloride (BSC)
18. Benzophenone
19. Benzyl chloride
20. Diglyme
21. Diethyl ether
22. Dimethyl carbonate
23. Dimethyl malonate
24. Dimethyl sulfoxide
25. Ethyl chloroformate
26. Ethyl formate
27. Fluorobenzene
28. Hydrazine hydrate HH 80%
29. Imidazole
30. Iso propyl acetate
31. Malonic acid
32. Methyl acrylic acid
33. Methane sulfonic acid
34. Methane sulfonyl chloride
36. Methyl ethyl ketone (MEK)
37. Methyl tert butyl ether (MTBE)
38. Mono chlorobenzene (MCB)
39. Meta aminophenol
40. N Heptane
41. N Hexane
42. N Propanol (NPA)
43. N, N-dimethyl acetamide (DAMC)
44. N, N-dimethylaniline
45. N Butanol
46. N methyl morpholine