Sucker Rod Wrench is made of high-quality alloy steel, and boasts and advantages of hardness and abrasion resistance. Its opening is applicable to the square shape of the steel-made sucker rod. The balanced design of wrench can reduce the fatigue of users, which is an outstanding tool for manual mounting and demounting sucker rod.
Supplier: Building materials (ss steel, angles , rods, columns, etc), construction materials, machinery (cranes, truck, forklift, etc), stainless steel, gratings frp , hdpe , ss , hdg, ss rods, ss pipes, ss angles, ss hinges, black steel pipe, galvanised pipe, flat bar, mild steel flat bar, ss coils, steel coils, square bars, hexagonal bars, round solid bars, values, reducers, clamps, asbestos ropes, pulleys, bearing, mesh, steel bars, hollow bars, ss plates, iso gratings, ss310, ss316, ss304, nm plates, aluminium sheets, high gloss acrylic sheets, construction vehicles:, forklift, excavator, dump trucks, and tower cranes
Buyer: Building materials
Sucker rods are manufactured according to API 11B Specifications. Currently, we market 3 types of API sucker rods Grade D Alloy and Grade D Special which are formulated from different alloysï¼?AISI 4130 (Grade D), AISI 4142 (Grade D) and AISI 4720 (Grade KD). Manufacturing Process: 1. Rod Bar The incoming rod bars are inspected for any damage, fault and discontinuities.Before arranging the rod bars for production process, carry out chemical composition testing, dimensional inspection & surface quality inspection. High quality standard is maintained at various stage inspections. 2.Manufacturing Rod bars are manufactured from hot rolled alloy steel. Rod bars are machine straightened and cold drawn to the required size. The rod bar ends are hot forged according to API designed sizes. The rods are then heat treated over the full length.As per requirement of mechanical properties, the rods are normalized and tempered to the specified level or quenched and tempered to the required hardness and strength. Care is taken to achieve metallographic structure with no residual stresses in the rod.A sample specimen is cut from the heat treated material and is tested for ultimate tensile strength, yield strength and elongation. The rod is then again checked for straightness. The forged ends are properly aligned with its body. Rods are cleaned by shot-blasting to remove any scale and oxidation. The forged ends are machined on C.N.C. Lathe machines as per API dimensions and checked with API approved gauges.
Size 5/8" (16mm), 3/4" (19mm), 7/8" (22mm), 1" (25mm), 1-1/8" (28mm) Length 25', 30' Grade d, kd Materials alloy steel aisi4130, aisi4142 & aisi4720 Standard api 11b.
Rod bop to prevent the leakage of oil and gas in the recovery operation control device, can guarantee the well-flushing, sand washing, fracturing downhole operation smoothly. By changing different valve core, and can meet the needs of all kinds of rod seal. Product design is reasonable, simple structure, convenient operation, reliable sealing, long service life and is one of indispensable tools in oil field work.
A steel sucker rod is one of the important equipment of oil field.Can provide seven kinds of the level of sucker rod,including C, K, D, KD, HL, HY andC, K, D sucker rod press design and manufacture standard of API Spec 11 B, KD, HL, HY grade rod design and manufacture according to standard SY/T5029-2006, KH level rod according to standard within the company. Grade C sucker rod is mainly used for light, medium load, no corrosion or corrosion shallow Wells or in deep well pumping, material is carbon steel or manganese steel. Grade D sucker rod is made of high quality alloy steel, after heat treatment with high strength, plasticity is good, long life and other characteristics, it is suitable for light when there is no corrosion or corrosive medium in the deep Wells under the environment of use. Grade H(HLandHY) sucker rod is made of high quality alloy steel manufacturing, have the characteristics of ultra high strength, used in deep well, big strong pump used in production. And K and KD sucker rod with different content of Ni Cr - Ni - Mo high quality alloy steel manufacturing, have anticorrosive, resistance to corrosion function, respectively applicable to strong corrosion of shallow, middle and deep Wells.
A steel sucker rod is one of the important equipment of oil field.Can provide seven kinds of the level of sucker rod,including C, K, D, KD, HL, HY andC, K, D sucker rod press design and manufacture standard of API Spec 11 B, KD, HL, HY grade rod design and manufacture according to standard SY/T5029-2006, KH level rod according to standard within the company. Grade C sucker rod is mainly used for light, medium load, no corrosion or corrosion shallow Wells or in deep well pumping, material is carbon steel or manganese steel. Grade D sucker rod is made of high quality alloy steel, after heat treatment with high strength, plasticity is good, long life and other characteristics, it is suitable for light when there is no corrosion or corrosive medium in the deep Wells under the environment of use. Grade H(HLandHY) sucker rod is made of high quality alloy steel manufacturing, have the characteristics of ultra high strength, used in deep well, big strong pump used in production. And K and KD sucker rod with different content of Ni Cr - Ni - Mo high quality alloy steel manufacturing, have anticorrosive, resistance to corrosion function, respectively applicable to strong corrosion of shallow, middle and deep Wells. For more information, you can contact me : Looking forward to cooperating with you!
The snow removing equipment is the necessary equipment of snow cleaning for farm,orchard, schools, parks, squares, residential areas, garden, lanes sideways, bridges and other key securing sites and widely used in snow winter. This equipment could improve the efficiency of snow removal, reduce labor intensity, and ensure pepole going out more safety and convenient. 1).The road sweeper can be matched to tractor,wheel loader,forklift, 2).powered by hydraulic output of these machinery,only tractor could be driven by PTO. 3).PP with steel wires brushes. 4).Working width from 1200 to 2500mm 5).Suitable for cleaning road,street,floor and other flat.
Type: Nylon sucker rod centralizer, anti- partial-wear sucker rod centralizer, roller type sucker rod centralizer Size: 5/8", 3/4", 7/8", 1", 1-1/8" Ucker rod centralizer used in pumping well, it's a tool which can set upright the sucker rod, and protect the sucker rod wiping with tubing pipe, we can product wheel centralizer, rod shaped centralizer, twist centralizer. Operational principle: 1. Wheel centralizer: When the sucker rod works the wheel rolls on tubing inside. It can avoid the sucker rod to rub with the tubing pipe. 2. Rod shaped centralizer: When the sucker rods work, nylon block touches the tubing inside, it can avoid the sucker rod to rub with the tubing pipe. The nylon block can rotate, then the rub is even wear. The user only change the nylon block replace rod body, can save fabrication-cost. 3. Twist centralizer: Cost of it is low, operate easily.
Our tubing anchor anchor the tubing string in a rod pumping well .The tubing anchor effectively reduce rod, tubing, and casing wear. This cuts operating costs. Elimination of breathing and buckling of the tubing string also increases production by lengthening the effective stroke of the pump, which increases volumetric efficiency. Based on proven technology, the Anchor uses hydraulically activated hold-down slips to provide an anchoring point for the tieback or workstring during stimulation operations. These tubing anchors are the most economical and effective insurance you can buy against premature repairs and downtime.
