The bushing is to drive kelly by matching with rotary bushing. There are two drive modes: square drive and pin drive. Thre types: Heavy, medium, and light. For kelly: Square and Hexagonal. It fits for 17 1/2-49 1/2 in rotary tables. The product is designed and manufactured according to API Spec 7K Specification for Drill and well servising Equipmen.
Our ESP Cable Protector are widely used to protect the wide range of ESP cable, control line, umbilical lines or encapsulated bundles in the wellbore.Using channels to shield cables or lines as they transition across the coupling to prevent damage during installation or retrieval of Completions.
Specification
The material can be low carbon steel or stainless steel according to customer needs.
It can also design and develop multi-channel protectors according to different working conditions, so as to effectively isolate various pipelines.
Applations:
ESP cable
Subsurface safety valves control line
Chemical injection line
Permanent Gauges
Intelligent Wells
Fiber Optic
Coiled tubing
APPLY TO BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type :Single Ram BOP, Double Ram BOP, Shear Ram BOP
Standard: API Spec 16A,16C
Working pressure:2000psi-15000psi(14 Mpa-105Mpa)
Operating temperature:-18deg--121deg
Bore size:7 1/16"-21 1/4"
Top & nottom connection:Flanged,studded
Ram-type blow out preventer is important equipment used in oil drilling operations. Variable bore ram-type blowout preventer, as a improved type, is capable of sealing around drill pipes with a range of sizes and have advantanges such as low cost and convenience, expatiate on the sealing well mechanism, this paper discusses the structural characterstics of several typres fo variable bore ram, the operation of the varialble bore ram is simulated with the finite element model. the distribution of the stress is analysed, which provides the toudation for optinizing the design of variable bore ram-type blowout preventer
Casing Scraper is ideal for the removal of dirt which may be left over the inside walls of casing, such as solid cement, hard wax, various salt crystals or deposits, perforation burrs, iron oxide residues resulted from rusting, so as to make all down hole tools pass through unblocked. Especially when a small circular clearance is available between the down hole tools and casing inside diameter, the complete scrapping becomes more necessary before further working. At present in the large petroleum well scrapping in the internal wall of casing by use of casing scraper is a necessary step.
Casing Scraper is ideal for the removal of dirt which may be left over the inside walls of casing, such as solid cement, hard wax, various salt crystals or deposits, perforation burrs, iron oxide residues resulted from rusting, so as to make all down hole tools pass through unblocked. Especially when a small circular clearance is available between the down hole tools and casing inside diameter, the complete scrapping becomes more necessary before further working. At present in the large petroleum well scrapping in the internal wall of casing by use of casing scraper is a necessary step.
Casing Scraper is ideal for the removal of dirt which may be left over the inside walls of casing, such as solid cement, hard wax, various salt crystals or deposits, perforation burrs, iron oxide residues resulted from rusting, so as to make all down hole tools pass through unblocked. Especially when a small circular clearance is available between the down hole tools and casing inside diameter, the complete scrapping becomes more necessary before further working. At present in the large petroleum well scrapping in the internal wall of casing by use of casing scraper is a necessary step.
Dies and inserts and jaws for wellhead tongs/slips
The manual tong dies and slip inserts are made of high-quality alloy steel.
They are chemically heart-treated for surface hardness.
They are wear-resisting and corrosion-resisting and they have a long service life.
We can also design and manufacture special inserts according to customer's requirement.
Technique Parameter:
Use for product
Pipe size (in)
Rotary Slips
2 3/8" - 5 1/2"
3 1/2" - 7" Rotary Slips
3 1/2" - 7"
W3 1/2-75 (125) Rotary Slips
2 3/8", 2 7/8", 3 1/2"
5-75 (125,200) Rotary Slips
4", 4 1/2", 5"
DCS-S Drill Collar Slips
3" - 14"
Drill Collar Slips
4 1/2" - 11 3/4" (8" & 9")
Casing Slips
6 5/8" - 30"
WA-C Safety Clamps
3 1/2" - 15 5/8"
WA-T Safety Clamps
1 1/8" - 4 1/2"
QQP60-89/585 Pneumatic Spider
2 3/8" - 3 1/2"
QQP60-89/675 Pneumatic Spider
2 3/8" - 3 1/2"
QQP60-127/900 Pneumatic Spider
2 3/8" - 5"
Well Repair Manual Tongs
2 3/8" - 10 3/4"
B Manual Tongs
2 3/8" - 12 3/4"
DB Manual Tongs
3 1/2" - 17"
13 3/8 Casing Manual Tongs
13 3/8"
Q13 3/8-30 Casing Manual Tongs
13 3/8" - 30"
The mud pump piston assembly is one of the main parts of the hydraulic end system of the mud pump.The discharge pressure of the mud pump is generated by reciprocating linear motion of the piston assembly in the piston.Piston assembly by the piston core, rubber, spring, pressure plate, etc.
Our mud pump pistons are strictly manufactured according to API Standard, which with a high performance in various well drilling environment. The hub is forged from high quality steel, and the piston rubber is made from specially formulated compounds which are of heat, oil and water resistance. It is interchangeable with all other API standard designed pistons. And the valve rubber is easy to install.
DTH Drill Rods (Tubes/Pipes) and Sub Adaptors: Acedrills has DTH drill rods with several different thickness designs for each diameter, made from different grade steels for selection. So, in practice of field drilling, under different condition, there may be in need of different kinds of drill rods for particular application. For example, the thicker ones with general high quality grade steel for drilling hole of average depth, such as blasting holes; and the thinner ones with better grade steel for drilling hole of very deep, such as drilling for ground thermal. Moreover, Acedrills DTH drill rods are also well heat-treated, precision manufactured, and friction-welded.
We can produce all types of drilling rods such as HDD drilling rods, oil drilling rods, geological drilling rods, anchoring drilling rods and other special drilling rods, and trenchless special drilling tools such as pilot guide bits, swivels, ream bits, reducer unions,pneumatic pipe-rammer,hydraulic power break out tong for drill pipe.
We supply slick drill collars, spiral drill collars and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches. Besides the drill collars in the table below, we can supply other drill collars at customers' request.
Materials:
Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available.
Trepanning and Heat Treatment:
Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface.
Traceability:
Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.
Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.
Cold Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.
Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.
Slip Groove, Elevator Groove and Size:
Lake offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines.
Thread Protectors:
Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
1. Bit Breakers
The Bit Breakers are suitable to make up or break out the drilling bit during the oil well drilling and repairing operations. The Users should be chosen the bit breaker according to the size and model of the drilling bit.
Feature:Improve support and retention
Advantage:Manage the magnitude cutter loading and bit torque
Benefit:Improved bit durability and directional responsiveness
Advantage:Higher nozzle counts and/or fixed ports to best serve cleaning,cooling and cuttings evacuation requirements with available hydraulic flows.Allow for higher flow rates with minimal increase in pump pressure.
2. Detailed introduction to Bit breaker
1>Bit breaker is mainly used to screw on or off a rock bit to the bottom of drill string.
2>It can also prevent the rock bit from dropping into well hole.
3>The price of it is cheap and the use of it is safety and reliable.
4>It is easy to operate. First, the bit breaker is placed on well hole and then put the rock bit onto it. Turn it to screw on or off the bit by turnplate.
1. Bit Breakers The Bit Breakers are suitable to make up or break out the drilling bit during the oil well drilling and repairing operations. The Users should be chosen the bit breaker according to the size and model of the drilling bit. Feature:Improve support and retention Advantage:Manage the magnitude cutter loading and bit torque Benefit:Improved bit durability and directional responsiveness Advantage:Higher nozzle counts and/or fixed ports to best serve cleaning,cooling and cuttings evacuation requirements with available hydraulic flows.Allow for higher flow rates with minimal increase in pump pressure. 2. Detailed introduction to Bit breaker 1>Bit breaker is mainly used to screw on or off a rock bit to the bottom of drill string. 2>It can also prevent the rock bit from dropping into well hole.
We can produce all types of drilling rods such as HDD drilling rods, oil drilling rods, geological drilling rods, anchoring drilling rods and other special drilling rods, and trenchless special drilling tools such as pilot guide bits, swivels, ream bits, reducer unions,pneumatic pipe-rammer,hydraulic power break out tong for drill pipe.
We supply slick drill collars, spiral drill collars and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches. Besides the drill collars in the table below, we can supply other drill collars at customers' request.
Materials:
Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available.
Trepanning and Heat Treatment:
Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface.
Traceability:
Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.
Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.
Cold Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.
Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.
Slip Groove, Elevator Groove and Size:
Lake offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines.
Thread Protectors:
Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
We supply slick drill collars, spiral drill collars and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches. Besides the drill collars in the table below, we can supply other drill collars at customers' request.
Materials:
Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available.
Trepanning and Heat Treatment:
Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface.
Traceability:
Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.
Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.
Cold Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.
Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.
Slip Groove, Elevator Groove and Size:
Lake offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines.
Thread Protectors:
Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
Application:
High chrome bimetal liner is used as a kind of mud pump fluid end accessories in the oil drilling industry.
Features:
Our bimetal liner, API certified, providing wear-resistant outer sleeve and high chrome corrosion-resistant inner sleeve. The high chrome liner has high rigidity of HRC>65 after heat treatment.
Advantages:
The bimetal liner offers long service life of about 800 hours, which is 2 to 3 times the lifetime of common ones in serve environment.
Lake Petro has very rich experience in supplying spare parts of mud pump to the worldwide Oil Drilling industry.We stock and sell a wide selection of mud pump fluid end expendables and spares parts.
Mud pump parts for F series mud pump, For P series mud pump, For PZ series mud pump, For 3NB series mud pump.
These parts include liners, pistons, valves & seats,piston rods, rod clamps, extension rods, all
fluid end seals and gaskets, fluid cylinder modules and accessories, as well as power end
components, such as crankshaft assemblies, gear sets, connecting rods, crosshead, and bearings.
Specifications about Mud Motor Downhole Motor
Downhole motor is a kind of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a by-pass valve into the motor. This stream produces pressure loss at both inlet and outlet of the pump, to push the rotor into rotating, and to transmit the torque and speed onto the bit. The downhole motor property mainly depends upon its property parameters.
ADVANTAGES OF DOWNHOLE MOTOR
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
1. Material: High manganese steel
2. Standard: API
3. Features: Big torque, high effective, wide flow rate range, running stable and long using time.
4. Specifications: Fit for 3 1/2"--17 1/2" well hole, including straight body, single- bent and
DC-type Drill Collar Raiser is mainly applied for holding and lifting drill collars in petroleum drilling,natural gas drilling and workover operation.This product is designed and manufactured according to API Spec 8A/8C Specification for Drilling and Production Hoisting Equipment.The structure of this drill collar dolly link adapter is logical,safe and relable,which is safer than traditional device and extends service life for tools.It is a perfect device for drilling and workover operation.
DC-type Drill Collar Raiser is mainly applied for holding and lifting drill collars in petroleum drilling,natural gas drilling and workover operation.This product is designed and manufactured according to API Spec 8A/8C Specification for Drilling and Production Hoisting Equipment.The structure of this drill collar dolly link adapter is logical,safe and relable,which is safer than traditional device and extends service life for tools.It is a perfect device for drilling and workover operation.
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable/
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type :Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Standard: API Spec 16A,16C
Working pressure:2000psi-15000psi(14 Mpa-105Mpa)
Operating temperature:-18deg--121deg
Bore size:7 1/16"-21 1/4"
Top & nottom connection:Flanged,studded
Down th hole drill pipes play a significant role in all DTH drilling, regardless of application, rock type, hole depth or drill rig. The key features of a high quality DTH tube are durability, accuracy and manageability. Sinodrills DTH drill pipes are made of superior alloy and the both thread ends are friction welded to the seamless steel pipe.The high pressure air is delivered to DTH hammer by DTH drill pipe, simultaneously it transfers the rotation and press force to the DTH hammer.
Standard DTH drill pipe:
Diameter: 76mm, 89mm, 102mm, 114mm, 127mm, 140mm,
Length: 1000mm, 1500mm, 2000mm, 3000mm, 5000mm, 6000mm;
Thread: 2 3/8 API REG, 2 7/8 API REG, 3 1/2 API REG, 4 1/2 API REG, 2 3/8 API IF, 3 1/2 API IF
Special DTH drill pipe:
The drill pipe for Atlas Copco Ingersol Rand T4, Schramm T64, Atlas Copco F6, L6 and L8, and the drill pipe for Sandvik Driltech D25/D40K.
1,The tong head is the open structure position, and the integral tong head has good hardness and rigidity;
2,The three-jaw-plate clamping device is adopted in the master tong and back tongs. The front two jaw plates of the master tong are in the swing structure and the back jaw plate is the roller-climbing structure.
3,Four-gear rotation is adopted for large speed regulation range.
4,It has the braking mode with braking staple. The braking torque is large. The operation is simple. And it is convenient for repair and replacement;
5,With the open large gear supporting structure, hardness and rigidity of open large gear is enhanced considerably;
6,The shell is made of steel plate with high hardness.
7,Hydraulic torque indicator is provided. And installation interface of turning torque instrument is provided for computerized management.
LAKE offers crown impregnated height segments of 9mm, 12mm, 15mm, 16mm, 18mm, 20mm, and 25mm Diamond Core Drill Bits. Roschen also can supply different kinds of diamond core bits in different size, which are used in shale, sandstone, limestone, marble, dolomite, schist, granite, quartz, ironstone, chert, abrasive rock etc. Which including impregnated diamond core bit, surface-set diamond bit, reaming shells, casing bit, casing shoe bit, core lifter, core lifter case, core barrel assembly, inner tube head assembly, over shot, hoist plugs, drill rod, casing pipe etc.
Advantages:
Surface-Set diamond bits are primarily recommended for use in drilling relatively soft, abrasive, unconsolidated formations that are not effectively drilled by impregnated diamond bits. They are also recommended for use in drilling harder formations where the available rotational speeds and bit loads are insufficient to use impregnated diamond bits due to drilling equipment limitations.
Notice:
To select the right bit:
1) Please assess the speed and power of your drill for the size and depths of the holes
2) Please assess ground conditions (such as Stone / Granite / Concrete ) and down-hole conditions.
Size:
1) LAKE have all standard size of Diamond Core Drill Bits (Surface-Set) .
3) Different customers have different requests, we can make customize Diamond Core Drill Bits.
Crown Height:
LAKE offers crown impregnated depths of 9mm, 12mm, and 16mm Diamond Core Drill Bits. The taller crown heights can improve bit life time, have better stability and performance, reduce vibrations.
Specially about Waterways:
Diamond impregnated bits are suit for various waterways. Diamond Core Drill Bits suit better flushing in various ground conditions and drilling systems.
Threads:
1) Standard WL threads
2) As well as thread types required by clients are available.
Drill pipe slips Type SD can accommodate drill pipes from 2-3/8 to 7 inch. They are classified as type Short(SDS),Medium(SDML),Extra Long(SDML).SDS slips are designed for shallow hole drilling, SDML slips are the perfect choice for all medium depth drilling and SDXL slips are designed for deep drilling. The slips are designed and manufactured in API Spec 7K and SY/T 5049 Slips for well drilling. It is suitable to handle the drill rods during the oil well drilling operations for the exploration of petroleum and natural gases ,It is an essential tool for coupling and uncoupling .
Drill pipe slips Type SD can accommodate drill pipes from 2-3/8 to 7 inch. They are classified as type Short(SDS),Medium(SDML),Extra Long(SDML).SDS slips are designed for shallow hole drilling, SDML slips are the perfect choice for all medium depth drilling and SDXL slips are designed for deep drilling. The slips are designed and manufactured in API Spec 7K and SY/T 5049 Slips for well drilling. It is suitable to handle the drill rods during the oil well drilling operations for the exploration of petroleum and natural gases ,It is an essential tool for coupling and uncoupling .
DC-type Drill Collar Raiser is mainly applied for holding and lifting drill collars in petroleum drilling,natural gas drilling and workover operation.This product is designed and manufactured according to API Spec 8A/8C Specification for Drilling and Production Hoisting Equipment.The structure of this drill collar dolly link adapter is logical,safe and relable,which is safer than traditional device and extends service life for tools.It is a perfect device for drilling and workover operation.
1.It is divided into drill string crossover and tubing Crossover.
2.Drill string Cross-over is divided into type A, type B and type C.
Crossover subs are made from AISI41455H chrome molybdenum alloy steel, and the content of micro-element can be controlled availably. The surface of sub threads are phosphated or copperized. According to shapes and applications, crossover subs are divided into three types:
Type a stands for the same diameter: one crossover sub has one size.
Type b stands for reduce type: one crossover sub has two sizes.
Type c for left hand thread type: the connection thread is left hand type.
Use:
it plays a role of connectivity and conversion in different specifications drilling tools.
Characters:
crossover subs are complied with SY5200-93 or API Spec7. All products must be ultrasonic nondestructive tested and the surface copper coated. Crossover subs of various types and lengths are available.
The Spiral Drill Collar of Lake is made from AISI 4145H modified alloy steel, and completely meets the requirement of API Spec 7-1 and SY/T5144 Standard. It is a kind of drill collar which adds three dextrogyrate spiral groove on the outer circle of ordinary drill collar when processing, and the purpose is to reduce the area of contact and friction with the well wall, which can effectively prevent the pressure sticking. The single weight of the spiral drill collar is round about 4% lighter than the ordinary drill collar with the same specification, and the shape and thread of the both ends are the same with the drill collar.
API 7-1 drilling collar is one of the most important product of hexin oil drillings which mainly used to provide bit weight to drill so that drill pipe is in tension. Especially drill collar can keep drill bit centralized and hole track by large rigidity. GANG GONG brand drill collars are manufactured strictly from API Spec7-1 standard.
1.It is divided into drill string crossover and tubing Crossover.
2.Drill string Cross-over is divided into type A, type B and type C.
Crossover subs are made from AISI41455H chrome molybdenum alloy steel, and the content of micro-element can be controlled availably. The surface of sub threads are phosphated or copperized. According to shapes and applications, crossover subs are divided into three types:
Type a stands for the same diameter: one crossover sub has one size.
Type b stands for reduce type: one crossover sub has two sizes.
Type c for left hand thread type: the connection thread is left hand type.
Use:
it plays a role of connectivity and conversion in different specifications drilling tools.
Characters:
crossover subs are complied with SY5200-93 or API Spec7. All products must be ultrasonic nondestructive tested and the surface copper coated. Crossover subs of various types and lengths are available.
API Drilling Chinese Downhole Drilling Mud Motor is a kind of downhole drilling tool powered by mud. The mud from mud pump enters motor by way of bypass valve, and a pressure drop between motor inlet and outlet created, such pressure drop will drive the motor rotator to rotate, and transmit the torque and rotary speed to bit by universal shaft and transmission shaft. The downhole motor property mainly depends upon its property parameters. This product uses the high and new technology of coating to avoid coating off of rotors resulted from the traditional technology. Its strength and life are greatly improved. It is applicable to directional drilling horizontal drilling, composite drilling, cluster wells, sidetrack wells and well workover etc
Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well.
options
The TIS lubricator and riser section range is available with the following options :
3.00â?�ID to 9.00â?� ID through bores
3ft to 20ft length options
5,000 Psi, 10,000 Psi and 15,000 Psi working pressures
Standard or sour service
Service temperature range of -29 to +121 °C
Choice of quick union or API flanged connections
Choice of bleed port connections
Technical Features
On conventional lubricators, the component parts are screwed together by means of a special TIS acme connection, which has a primary o-ring seal and secondary metal to metal seal
On integral type lubricators, the quick union collars can be very quickly and easily removed for cleaning, inspection, etc
Integral lubricator sections can also be provided with an optional full re-cut facility on quick union connections
Yj hydraulic winches
Product description:
1.This hydraulic winch is a lifting equipment driven and braked by hydraulic.
2. It has the advantages of compact structure, light weight, convenient operation and stable lifting.
3. It is used to lift heavy objects in mines, ports and building engineering.
1.Cutting structure this type tci tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.
2.Gauge structure this type tci tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
3.Bearing structure of this type tci tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.
4.Seal and lubrication of this type tci tricone bits:
Premium o-ring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .
5.Product application this type tci tricone bits:
It can receive high wob in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
Specifications
API 16A Standard 2 7/8" sucker rod BOP
1. size: 2 7/8"
2.Pressure: 3000 PSi
3. Use for 1 1/4' rod
2 7/8" sucker rod BOP
API standard 2 7/8" sucker rod BOP
API 16A Standard 2 7/8" sucker rod BOP
API Standard 2 7/8" sucker rod BOP
API Standard sucker rod BOP
1. size: 2 7/8"
2.Pressure: 3000 PSi
3. Use for 1 1/4' rod
API Standard 2 7/8" sucker rod BOP
Suck rod bop
1.description of suck rod bop
The Sucker Rod Blowout Preventer is used to prevent oil and gas from leaking, and ensure washing wells and etc
2.Specification of suck rod bop
1.PR1,PSL1-3,TEMP:PU,AA-FF
2.Connection:welding ,thread,
3.API specification
BLOW OUT PREVENTOR 2 â?? 7/8 , 3000 PSI, 1-1/4 ROD
annular blowout preventer
blowout preventer ,cameron double ram bop,BOP,double ram blowout preventer ,annular blowout preventer ,BOP,double ram blowout preventer annular blowout preventer cameron double ram bop
blow-out preventer (BOP)
BOP is shut in the well for oil testing, workover, well completion and operating process to prevent the blowout accident, totally enclosed and semi-closed two functions into one, has a simple structure, easy to operate, resistant to high-pressure characteristics is used to prevent blowouts safety oilfield sealing wellhead.
Oil drilling, installed at the wellhead casing head, used to control the high pressure oil, gas, water blowout. Wells of oil and gas pressure is high, the BOP can be the wellhead closed (shut). The shutter has four, alternatively bullied invaded mud, increasing the pressure of the borehole fluid column, so as to suppress the high-pressure oil and gas discharged from the drill pipe is pressed into the heavy mud.
Its type sub-ordinary blowout preventer, of universal blowout preventers and rotating blowout preventer. Ordinary BOP ram with full-and semi-closure, full closure type blowout preventer can seal the entire wellhead; semi-sealed shut wellhead annular cross-section of drill pipe exists. Universal BOP can start in case of emergency to cope with any size drill and empty wells; the rotating BOP side spray edge drilling operations. In addition to the outside two ordinary BOP, plus Universal BOP, rotating BOP, so three or four combinations installed at the wellhead deep drilling often. [1] annular BOP
Annular Blowout Preventer
PDC Bits
1. Specification of PDC Bits
Type
PDC bits ( from 3 7/8-17 1/2 Steel body and Matrix body)
Applicable
Oil field, Water well, Geothermal, and Underground foundation work
Formation
Sticky, Soft, Medium hard, Hard formation
blade
4 / 5 / 6 / 7 / 8 / 9
Packing
wooden/ steel box
Payment Term
T/T,
MOQ
1 Piece
Supply Ability
50Pieces/month
Delivery Time
Within 7-15 work days
2. Main Products we Provide
1). PDC Bit: Matrixt body/Steel body with cutter or without cutters;
2). PDC Drag Bit: Drilling soft formation, save cost, longtime usage than normal
drag bits, and suitable for mud clay and sandstone formation;
3). Tricone Bit:TCI and Steel/Milled tooth;
4). Mining Tricone Bit:High quality mining tricone bit with good price;
5). Diamond Core Bit:Various kind of core bits;
6). Other Drilling Tools:Manual Tongs,Safty clamp, Elevator,Slips,Taper, and so on...
1. PDC Matrix Body bit
Type and feature
PDC bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",etc.Body type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings.
2. PDC Matrix Body Core Bit
Type and feature
PDC core bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
75/54mm,94/74mm,113/89mm,113/109mm,153/129mm,215/105mm,etc.
3. PDC Steel Body Bit
Type and feature
PDC bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4", etc. Body Type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings
4.PDC Drill Bit Body & Cutters Welding
PDC body(matrix)
Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc.
2.PDC body(steel)
Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc.
Core bit body(matrix or steel)
Main Type:75/54,94/74,113/89,113/109,153/129mm,110/215.9mm, etc.
4.PDC cutter and Welding OEM
PDC Cutters Type : 5/16"(8mm), 1/2"(13mm), 5/8"(16mm), 3/4"(19mm).
1. PDC Matrix Body bit
Type and feature
PDC bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",etc.Body type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings.
2. PDC Matrix Body Core Bit
Type and feature
PDC core bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
75/54mm,94/74mm,113/89mm,113/109mm,153/129mm,215/105mm,etc.
3. PDC Steel Body Bit
Type and feature
PDC bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4", etc. Body Type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings
4.PDC Drill Bit Body & Cutters Welding
PDC body(matrix)
Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc.
2.PDC body(steel)
Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc.
Core bit body(matrix or steel)
Main Type:75/54,94/74,113/89,113/109,153/129mm,110/215.9mm, etc.
4.PDC cutter and Welding OEM
PDC Cutters Type : 5/16"(8mm), 1/2"(13mm), 5/8"(16mm), 3/4"(19mm).
Quick Details
Condition:
New
Warranty:
1.5 years
Applicable Industries:
Energy & Mining
Local Service Location:
None
Showroom Location:
None
Video outgoing-inspection:
Provided
Machinery Test Report:
Provided
Marketing Type:
Hot Product 2019
Place of Origin:
Shandong, China
Brand Name:
Lake Petro
Type:
Drill Collar
Machine Type:
Drilling Tool
Certification:
API
Material:
Stainless Steel
Processing Type:
Forging
Use:
Well Drilling
Product name:
Non Magnetic Drill Collar
Application:
Oil Field
Usage:
Hole Drilling
Size:
API Standard Size
Standard:
API 7-1
Thread:
API 5B
Length:
9450
Supply Ability
Supply Ability:
500 Piece/Pieces per Month
Packaging & Delivery
Packaging Details
Standard Export Package
Port
Qingdao Or Tianjin
Picture Example:
package-img
Lead Time :
Quantity(Pieces) 1 - 10 >10
Est. Time(days) 40 To be negotiated
Quick Details
Condition:
New
Warranty:
1.5 years
Applicable Industries:
Energy & Mining
Local Service Location:
None
Showroom Location:
None
Video outgoing-inspection:
Provided
Machinery Test Report:
Provided
Marketing Type:
Hot Product 2019
Place of Origin:
Shandong, China
Brand Name:
Lake Petro
Type:
Drill Collar
Machine Type:
Drilling Tool
Certification:
API
Material:
Stainless Steel
Processing Type:
Forging
Use:
Well Drilling
Product name:
Non Magnetic Drill Collar
Application:
Oil Field
Usage:
Hole Drilling
Size:
API Standard Size
Standard:
API 7-1
Thread:
API 5B
1. Standard: API
2. Pressure: 2000psi~20000psi
3. Sie: 3-1/8"~26-3/4"
Spacer spool, in accordane with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no prevision for suspension of tubular members and which may have no prevision for sealing of tubular members.
We manufacture the sapcer spool in all size and pressure ratings suitable for Well Head extension, BOP spacing, and Choke, Kill, and production Manifold applications.
We can produce all kinds of API 6A double studded adapter for wellhead use. It is important for wellhead use. It is important device to connect the different flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API flange certification.
Product Description
We can produce all types of drilling rods such as HDD drilling rods, oil drilling rods, geological drilling rods, anchoring drilling rods and other special drilling rods, and trenchless special drilling tools such as pilot guide bits, swivels, ream bits, reducer unions,pneumatic pipe-rammer
Technical parameter
OD of Machine(mm): 260/190
Length of Machine(mm): 1390
Weight(kg): 320
Air Consumption(M3/Min): 3~8
Pressure of Air(MPa): 0.4~0.7
Diameter of Pipe laying(mm): 273\325\426
We can produce all types of drilling rods such as HDD drilling rods, oil drilling rods, geological drilling rods, anchoring drilling rods and other special drilling rods, and trenchless special drilling tools such as pilot guide bits, swivels, ream bits, reducer unions,pneumatic pipe-rammer,hydraulic power break out tong for drill pipe.
Pipe Size 40-200mm
We supply slick drill collars, spiral drill collars and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches. Besides the drill collars in the table below, we can supply other drill collars at customers' request
Materials:
Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available.
Trepanning and Heat Treatment:
Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface.
Traceability:
Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.
Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.
Cold Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.
Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.
Slip Groove, Elevator Groove and Size:
Lake offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines.
Thread Protectors:
Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
Shale shaker is first phase solids control equipment in drilling fluids processing system, also known as key solids control equipment in drilling mud system, shale shaker decides performance of the whole solids control system. Solids Control can design double shakers and triplicate shakerson single skid according to clientsâ??special requirements and also supply relevant connecting manifold, according to current industry situation,we provide both third generation linear motion shale shaker and fourth generation balanced elliptical shale shaker.
shale shaker absorbed advanced tech at home and abroad ,complete series shale shaker can meet customersâ?? variable demand. Clients feedback proved the advantages of this kind of shale shaker: high G-force, wide screen area, compressed structure, cost-effective, etc.
Main Prooerties
Patent shale shaker deck angle adjustable while working, mechanical deck angle adjustment with reliable performance.
Patent tighten rubber sealing for shale shaker deck and screen, long life and easy replacement.
Shale shaker bottom deck made from Stainless Steel for long service life.
Heat treatment on complete shale shaker deck for High G force operation.
Pretensioned shale shaker screen for fast screen replacement
Famous Brand Vibration Motors : IEC Ex, ATEX and UL Certified
Electrical components: SIEMENS, Schneider Brand
Flexible feeding type including Weir Feed, Top Feed, and Hopper Feed for different applications.
Non-Rotating Drill Pipe Rubber Protectors
1. Introduction:
Using of rubber non-rotating drill pipe protectors is one of the most important technology measures to reduce the casing wear and rotary torque of drill pipe in case of drilling deep well, ultradeep well, extended reach well, horizontal well and workover well,
Wear will reduce the casing string's anti-collapsing strength, anti-internal pressure blasting strength and other properties, which pose a serious threat to the safety of the casing string. It may cause well control problems and even blowouts. In severe cases, the well may be scrapped . In order to solve the problem of casing wear, our company has conducted in-depth research on casing wear technology and produced corresponding wear sleeves to solve the casing wear problem.
Non-Rotating Drill Pipe Rubber Protectors
1. Introduction:
Using of rubber non-rotating drill pipe protectors is one of the most important technology measures to reduce the casing wear and rotary torque of drill pipe in case of drilling deep well, ultradeep well, extended reach well, horizontal well and workover well,
Wear will reduce the casing string's anti-collapsing strength, anti-internal pressure blasting strength and other properties, which pose a serious threat to the safety of the casing string. It may cause well control problems and even blowouts. In severe cases, the well may be scrapped . In order to solve the problem of casing wear, our company has conducted in-depth research on casing wear technology and produced corresponding wear sleeves to solve the casing wear problem.
This series penumatic reversing valves are mainly used for regular reversing, high temperature, high humidity and the occasion uniffting for man, remote control is possible by utilizing these series of valves.
API 8C Drilling rig Swivel parts Pneumatic Reversing valves
Specification
Penumatic reversing valves specification
Model QF506 K24JQ-L40
Pressure Mpa 0.5-0.9
PSi 72-130
Main air inlet size 2-G1 2-Rc 1-1/2
size mm 168*120*120 250*150*160
in 7*5*5 10*6*7
Weight kg 5 10
lb 9.3 13
Packaging & Shipping
Packing information:
Wooden case, Cartong case, Container or other way, as your request.
API 8C Drilling rig Swivel parts Pneumatic Reversing valves
Shipping information:
By Express, Air, Sea, Car, Train etc, are accept. we can discuss when you order.API 8C Drilling rig Swivel parts Pneumatic Reversing valves
FAQ
How can I place order?
A: You can contact us by email about your order details, or place order on line.
How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank), L/C, D/P, Western Union are the most usual ways we are using. If you want to use other way, please tell me, we can discuss.
Whatâ??s the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr-epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we donâ??t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
API Drilling Chinese Downhole Drilling Mud Motor is a kind of downhole drilling tool powered by mud. The mud from mud pump enters motor by way of bypass valve, and a pressure drop between motor inlet and outlet created, such pressure drop will drive the motor rotator to rotate, and transmit the torque and rotary speed to bit by universal shaft and transmission shaft. The downhole motor property mainly depends upon its property parameters. This product uses the high and new technology of coating to avoid coating off of rotors resulted from the traditional technology. Its strength and life are greatly improved. It is applicable to directional drilling horizontal drilling, composite drilling, cluster wells, sidetrack wells and well workover etc.
Wire-line core drilling tools can lift core from drill rods without picking up coring system. A complete set of wire-line drill tools include: Core barrel assembly, overshot assembly, drill rods, holding dog, hoisting plug, circle wrench etc. It has some advantages such as high penetration rate, high penetration rate, high core recovery ratio, long bit life and lower labour intensity. The advantages can get more clear with the increasing of drill hole depth.
We can supply B N H overshot Assembly.
Brief Introductions of overshot
We are a China core drill manufacturer. The overshot is used when wear and other mechanical damage prevent the use of the regular pulling tool. We can produce overshot assembly of all Wireline and Chinese standards. Our overshots are consisted of lifting dogs, jar tube and swivel. Owing to the large amount of stocks, the products can be shipped out immediately according to your requirements. Geotec sincerely hopes to cooperate with you.
Features of overshot
1) Strong magnetic field and strong attractive force.
2) Have multiple functions.
3) Be convenient and safe in use.
4) Advanced designs and multiple choices.
Applications of overshot
It is widely used in geological and mineral, metallurgy, mining, oil drilling, and hydrology industries. This product is suitable for a wide range of aperture grades. It is used for attracting the pro-magnetic objects, for example, steel drop, hard alloy, sheet iron, iron slab, scrap iron as well as other iron apparatus left in the hole.
Pecifications
1 nominal pressure pn: 1.6-25.0mpa(150-1500lb)
2 nominal diameter dn: 50-700mm(2-28in)
Pigging valve
Performance range:
Nominal pressure pn: 1.6-25.0mpa(150-1500lb)
Nominal diameter dn: 50-700mm(2-28inch)
The pigging valve produced in our company is a new device used to clean oil, natural gas, chemicals, water and other fluid transportation pipeline (patent number: zl 97 2 39827.9). It deals with the launching and receiving of the pig, mainly used for pigging in transportation pipeline to ensure the cleanliness in the pipeline and delivery volume, prolong service life of pipeline and separately deliver different products. It has found its wide application in oil and gas field, oil-gas gathering and transportation, warehouse for oil land gas storage and transportation, chemical port, chemical combination storage and offshore platform.
For larger diameter pigging valve, the original is not easy to operate for larger opening force on bayonet type fast-opening door, our company has developed a new fast-opening door structure which adopts elastic automatic wedge-caulking locking steel belt and horseshoe double-eccentric center lock mechanism and pressure-relief lock and locking mechanism, to realize easy and flexible opening of quick-opening door of large diameter pigging valve and ensure its safety and reliability.
product specification
API5CT pup joint
API5CT pup joint
pup joint
pup joint
API5CT pup joint
pup joint
API5CT pup joint
API5CT pup joint
pup joint
(1)Standard: API 5CT
(2)Size: 2 3/8"-13 3/8"
(3)Grade: J55,K55,L80,N80.P110
(4Type:STC,LTC,BTC,EUE,NUE surface treatment:coating. Protection of Thread:Thread protector Packing: in bundle,by wooden pallet or by steel strip or by the requirements of customer.
Pup Joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin with couplings hand tight Pin-by-Coupling Box Flush joint connections
Quality is our main competitive advantage
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business
1.Cutting structure this type tci tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.
2.Gauge structure this type tci tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
3.Bearing structure of this type tci tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.
-
Characters:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular bop top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-dn in ans shapes, better performance by combining with ran blowout preventer in the use.
-
1.Cutting structure this type TCI tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.
2.Gauge structure this type TCI tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
3.Bearing structure of this type TCI tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.
4.Seal and Lubrication of this type TCI tricone bits:
Premium O-ring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .
5.Product Application this type TCI tricone bits:
It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
1. Name: variable bore ram
2. Size:2 3/8"--5 7/8"
Bop variable bore ram (aslo interchange with rongsheng bop)
Size: 2-3/8" to 3-1/2", 2-7/8" to 5", 3-1/2" to 5", 3-1/2" to 7", 3-1/2" to 5-1/2", 3-1/2" to 7-5/8", 2-7/8" to 5-7/8"
Type:cameron u type
1. Name: variable bore ram
2. Size:2 3/8"--5 7/8"
Bop variable bore ram (aslo interchange with rongsheng bop)
Size: 2-3/8" to 3-1/2", 2-7/8" to 5", 3-1/2" to 5", 3-1/2" to 7", 3-1/2" to 5-1/2", 3-1/2" to 7-5/8", 2-7/8" to 5-7/8"
1.Mud pump liner type: bi-metal liner, ceramic liner
2.Mud pump liner standard: api 7k
Mud pump liner description:
1. Our company could supply all spec premium liners and ceramic liners used in various brands of mud pumps.
2. Our premium liners are made of a forged steel outer shell and a high chromium iron inner sleeve. The out shell is centrifugally forged with high quality carbon steel, with tensile strength > 610mpa, yield strength > 450 mpa, elongation >17%, hardness hb -180-200; the inner sleeve is centrifugally forged with high chrome iron alloy, with hardness over hrc62 after heat treatment. Each liner is machined to close tolerances to assure ease of installation and long liner life with the inside diameter of these premium liners honed to a mirror-like finish for smooth even wear during the life of the liner. It could serve more than 800 hours.
3. Our ceramic liners are made of a forged steel outer shell and a ceramic inner sleeve. We can supply zirconia(zro3) sleeves as well as alumina(al2o3) sleeves. The ceramic liners are mainly used for well drilling and geological explorations especially widely used in harsh oil mining environment, offshore well&gas exploration etc. It serves a 5 to 10 times longer life than metal products, and will cut down the mining cost of more than 50%.
-
Cement basket is an effective aid in retaining and supporting the cement where weak formations and stage cementing is encountered. It is designed with flexible bow springs, heat-treated under controlled conditions for maximum strength and uniformity, are welded to slip-on collars and overlapping metal fins for flexibility and strength to support long columns of cement during primary cementing operation
-
Pigging valve
Performance range:
Nominal pressure pn: 1.6-25.0mpa(150-1500lb)
Nominal diameter dn: 50-700mm(2-28inch)
The pigging valve produced in our company is a new device used to clean oil, natural gas, chemicals, water and other fluid transportation pipeline (patent number: zl 97 2 39827.9). It deals with the launching and receiving of the pig, mainly used for pigging in transportation pipeline to ensure the cleanliness in the pipeline and delivery volume, prolong service life of pipeline and separately deliver different products. It has found its wide application in oil and gas field, oil-gas gathering and transportation, warehouse for oil land gas storage and transportation, chemical port, chemical combination storage and offshore platform.
For larger diameter pigging valve, the original is not easy to operate for larger opening force on bayonet type fast-opening door, our company has developed a new fast-opening door structure which adopts elastic automatic wedge-caulking locking steel belt and horseshoe double-eccentric center lock mechanism and pressure-relief lock and locking mechanism, to realize easy and flexible opening of quick-opening door of large diameter pigging valve and ensure its safety and reliability.
drill hose : it is composed of an inner rubber layer protection layer, middle rubber layer, steel wire spiral layer and external rubber cover
Use: The steel wire spiral drilling rubber hose are used in oil field well cementing. well pulling , petroleum geology exploration, small drilling machine, water conveyance, coal excavation. Used to carry slurry, normal temperature water, and other fluids.
API-7-1 Standard rock bit tricone bit TCI Tricone Bits inserted tooth
1.Cutting structure this type TCI tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.
2.Gauge structure this type TCI tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
3.Bearing structure of this type TCI tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.
4.Seal and Lubrication of this type TCI tricone bits:
Premium O-ring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .
5.Product Application this type TCI tricone bits:
It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
1.Cutting structure this type TCI tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.
2.Gauge structure this type TCI tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
3.Bearing structure of this type TCI tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.
4.Seal and Lubrication of this type TCI tricone bits:
Premium O-ring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .
5.Product Application this type TCI tricone bits:
It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
Api 16a standard 2 7/8" sucker rod bop
1. Size: 2 7/8"
2.Pressure: 3000 psi
3. Use for 1 1/4' rod
2 7/8" sucker rod bop
Api standard 2 7/8" sucker rod bop
Api 16a standard 2 7/8" sucker rod bop
Api standard 2 7/8" sucker rod bop
Api standard sucker rod bop
1. Size: 2 7/8"
2.Pressure: 3000 psi
3. Use for 1 1/4' rod
Api standard 2 7/8" sucker rod bop
Suck rod bop
1.Description of suck rod bop
The sucker rod blowout preventer is used to prevent oil and gas from leaking, and ensure washing wells and etc
2.Specification of suck rod bop
1.Pr1, psl1-3, temp:pu, aa-ff
2.Connection:welding , thread,
3.Api specification
Blow out preventor 2 â?? 7/8, 3000 psi, 1-1/4rod
Because of economy and powerful drilling capacity, down the hole hammer become an advanced drilling tool for drilling and mining industries. Down the hole hammers and drill bits are designed together to work in perfect unison, giving high penetration rates, long service life and low costs.
1. Deliver maximum energy to drilling bit, fast drilling speed and low air consumption due to the special inner structure of hd series dth hammer designed according to newest rock drilling theory.
2. Smooth performance and long service life of hd series dth hammer due to high quality alloy steel materials and advanced processing technology adapted.
3. Low problem rate and easy to maintenance due to simple , reliable and easy assemble and disassemble inner structure of hammer.
4. Easy to depart bit from hammer due to multihead thread connecting chuck and cylinder of hammer.
5. Interchangeable with dth bit and drill pipe
Low pressure and high pressure hammers are available in our company.
Because of economy and powerful drilling capacity, down the hole hammer become an advanced drilling tool for drilling and mining industries. Down the hole hammers and drill bits are designed together to work in perfect unison, giving high penetration rates, long service life and low costs.
1. Deliver maximum energy to drilling bit, fast drilling speed and low air consumption due to the special inner structure of hd series dth hammer designed according to newest rock drilling theory.
2. Smooth performance and long service life of hd series dth hammer due to high quality alloy steel materials and advanced processing technology adapted.
3. Low problem rate and easy to maintenance due to simple , reliable and easy assemble and disassemble inner structure of hammer.
4. Easy to depart bit from hammer due to multihead thread connecting chuck and cylinder of hammer.
5. Interchangeable with dth bit and drill pipe
Low pressure and high pressure hammers are available in our company.
Made of aisi4145h alloy steel, drill collar mainly used between the dill pipe and drill head and connected by conversion connector so that they can provide the pressure and weighting to dill head , in order to make the dill head to keep right trace .
If order of inquiry please offer: non magnetic drill collar
Outer diameter of dill collar
Handling features
Length of drill collar
Stress relief features
Drill collar bore
1.Cutting structure this type TCI tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.
2.Gauge structure this type TCI tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
3.Bearing structure of this type TCI tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.
4.Seal and Lubrication of this type TCI tricone bits:
Premium O-ring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .
5.Product Application this type TCI tricone bits:
It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
-
(1)standard: api 5ct
(2)size: 2 3/8"-13 3/8"
(3)grade: j55, k55, l80, n80.P110
(4type:stc, ltc, btc, eue, nue surface treatment:coating. Protection of thread:thread protector packing: in bundle, by wooden pallet or by steel strip or by the requirements of customer.
Pup joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup joint sets are available in: integral premium thread box-by-pin pin-by-pin with couplings boxed separately pin-by-pin with couplings hand tight pin-by-coupling box flush joint connections
Quality is our main competitive advantage
the requirements and expectations of our customers must be satisfied
quality management is integrated into all our business processes
management is responsible and accountable for quality performance
quality performance must be assured throughout the supply chain system
excellence in quality management is necessary for successful business
-
Performance range:
Nominal pressure pn: 1.6-25.0mpa(150-1500lb)
Nominal diameter dn: 50-700mm(2-28inch)
The pigging valve produced in our company is a new device used to clean oil, natural gas, chemicals, water and other fluid transportation pipeline (patent number: zl 97 2 39827.9). It deals with the launching and receiving of the pig, mainly used for pigging in transportation pipeline to ensure the cleanliness in the pipeline and delivery volume, prolong service life of pipeline and separately deliver different products. It has found its wide application in oil and gas field, oil-gas gathering and transportation, warehouse for oil land gas storage and transportation, chemical port, chemical combination storage and offshore platform.
For larger diameter pigging valve, the original is not easy to operate for larger opening force on bayonet type fast-opening door, our company has developed a new fast-opening door structure which adopts elastic automatic wedge-caulking locking steel belt and horseshoe double-eccentric center lock mechanism and pressure-relief lock and locking mechanism, to realize easy and flexible opening of quick-opening door of large diameter pigging valve and ensure its safety and reliability.
-
Ram-type blow out preventer is important equipment used in oil drilling operations. Variable bore ram-type blowout preventer, as a improved type, is capable of sealing around drill pipes with a range of sizes and have advantanges such as low cost and convenience, expatiate on the sealing well mechanism, this paper discusses the structural characterstics of several typres fo variable bore ram, the operation of the varialble bore ram is simulated with the finite element model. the distribution of the stress is analysed, which provides the toudation for optinizing the design of variable bore ram-type blowout preventer
Main parameters:
1)Standard: API
2)Pressure: 2000~15000psi(14-70Mpa)
3)Size:Nominal bore7 1/16~21 1/4" (179.4~539.75mm)
4) Shear/ Pipe/Blind Ram/ variable
5) According to the latest API Spec 16A standard,and quality standard of ISO9001.
Main parameters:
1)Standard: API
2)Pressure: 2000~15000psi(14-70Mpa)
3)Size:Nominal bore7 1/16~21 1/4" (179.4~539.75mm)
4) Shear/ Pipe/Blind Ram/ variable
5) According to the latest API Spec 16A standard,and quality standard of ISO9001.
Hydraulic Ram Wireline BOP
Size: 2 1/2"- 6 3/8"
Pressure: 3000-15000PSI
Ends: Flange,Thread, Union
4130/4135 Forging
Double Ram BOP
Blowout Preventers are designed to give positive protection against blowouts when operating with wire line in well services work, by providing a positive seal around wire line.
This BOP's are available basically in two types: Hydraulically Operated and Manually Operated, with configurations as desired. An equalizer valve allows the operator to equalize the pressure with lubricator pressure.
Blowout Preventers are available in sizes ranging from 2-1/2" ID through 6-3/8" ID and 3000 PSI through 15,000 PSI working pressure. Contact factory for details on pump, fittings, hoses and other accessories.
Main Technical Specification:
HDD Drilling Reamer;
a, Fluted back reamer Φ200-Φ1500
b, Barrel reamer Φ200-Φ1800
c, Ringed reamer Φ400-Φ1800
d, Delta/wings reamer Φ250-Φ350
API 16A BOP Spherical Packing Element
Basic Info
Type: Petroleum Drilling Machine
Usage: Well Drilling Machinery
Certification: API + ISO
Size: 7 1/16", 9", 11", 13 5/8", 21 1/4"
Material: NBR, Nr
HS Code: 84314310
Product Description
API 16A BOP Annular BOP Packing element Spherical or Tapered Features:
1)Standard: API
2)Pressure: 2000~15000psi
3)Size: 7-1/16" to 21-1/4"
4)Annuar/Tapered type Available
5)Quick delivery.
6)Can interchange with shaffer hydril SK Rongsheng's packing element
Description of Integral drill rods
Integral drill rods(integral rods or integral drill steels) are used for small hole drilling. Equipped with small power rock drills, like air leg rock drills, hand held rock drills, etc. integral drill steels can be used for drilling bore hole diameter from 29mm to 41mm usually. Integral drill rods are usually hexagonal with chisel tips or cross tips, the diameter are usually 19mm and 22mm. According to different application, different lengths are available from 600mm to 9600mm usually. With the best hollow drill steels and tungsten carbides, sinodrills integral drill steels will show you very good performance.
More Product Feature
1, light weight (lighter than the old-fashioned drill pipe 45%)
2, footage soon, dust small vertical holes left after drilling cuttings, into a hole clear.
3, card beans quickly and easily connect and save banding material.
4, under separation of body and drilling may be the end, the use of life extended.
5, water-based wet good pass operation
Tapered Drill Rod
1. Supply H22 and H25 tapered drill rod
2. Body Length: 400mm-8000mm
3. Tip Taper a4.8° 7°12°or others
4. Shank Length: 108mm or 159mm
5. Shank Flushing Hole: ø7.5mm-ø8.5mm
DTH Drill Rods (Tubes/Pipes) and Sub Adaptors: Acedrills has DTH drill rods with several different thickness designs for each diameter, made from different grade steels for selection. So, in practice of field drilling, under different condition, there may be in need of different kinds of drill rods for particular application. For example, the thicker ones with general high quality grade steel for drilling hole of average depth, such as blasting holes; and the thinner ones with better grade steel for drilling hole of very deep, such as drilling for ground thermal. Moreover, Acedrills DTH drill rods are also well heat-treated, precision manufactured, and friction-welded.
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable/
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: HYDRIL , SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type :Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Standard: API Spec 16A,16C
Working pressure:2000psi-15000psi(14 Mpa-105Mpa)
Operating temperature:-18deg--121deg
Bore size:7 1/16"-21 1/4"
Top & nottom connection:Flanged,studded
Used for: Annular Packing Element
Annular BOP Packing Element Spare Parts for Blowout preventer
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable/
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: HYDRIL , SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type :Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Standard: API Spec 16A,16C
Working pressure:2000psi-15000psi(14 Mpa-105Mpa)
Operating temperature:-18deg--121deg
Bore size:7 1/16"-21 1/4"
Top & nottom connection:Flanged,studded
Used for: Annular Packing Element
API P530 Non-magnetic Drill Collar
Materials:
The non-magnetic products of Dongying Lake is made from high-class low carbon stainless steel, and completely meets the requirement of API Spec 7-1 and SY/T5144 Standard. It has good low magnetic permeability, high mechanical property and perfect enduring intergranular corrosion cracking performance. It is mainly used for the inspection in the process of petroleum drilling, and the structure is the same with the ordinary drill collar.
Trepanning and Heat Treatment:
Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface.
Traceability:
Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.
Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.
Cold Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.
Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer / annular bop packing element, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type :Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Standard: API Spec 16A,16C
Working pressure:2000psi-15000psi(14 Mpa-105Mpa)
Operating temperature:-18deg--121deg
Bore size:7 1/16"-21 1/4"
Top & nottom connection:Flanged,studded
Shear ram is composed of upper ram body ,lower ram body, top seal,right seal, left seal and tool face seal. Tool face seal is placed in th front slot of the upper ram body,with right seal and left seal on the both sides. The shear ram is installed in the BOP in the same manner sa the common ram.but need to replace tha hanger pf the main piston to hunger. otherwise it will not be used.
-
Shear ram is composed of upper ram body ,lower ram body, top seal,right seal, left seal and tool face seal. Tool face seal is placed in th front slot of the upper ram body,with right seal and left seal on the both sides. The shear ram is installed in the BOP in the same manner sa the common ram.but need to replace tha hanger pf the main piston to hunger. otherwise it will not be used.
-
1. Drilling jar is connected with drill tool and worked with drill string is a downhole stuck freeing tool in drilling operation .It is a first selected tool for directional well,complicated well and deep well.
2. The drilling jar is consisting of ZSJ type drilling up jar and ZXJ type drilling down jar,both they can be used mutually or operated separately .
3. The up jarring section takes use of hydraulic mechanism,the jarring force can be adjusted according to up elevating load but can not exceed the max.load for tool load rated .
4.The down jarring section takes use of mechanical friction mechanism, the jarring force is well preadjusted by adjusting device before put into downhole.No re-adjustment can be allowed after jar is put into downhole.
1. Drilling jar is connected with drill tool and worked with drill string is a downhole stuck freeing tool in drilling operation .It is a first selected tool for directional well,complicated well and deep well.
2. The drilling jar is consisting of ZSJ type drilling up jar and ZXJ type drilling down jar,both they can be used mutually or operated separately .
3. The up jarring section takes use of hydraulic mechanism,the jarring force can be adjusted according to up elevating load but can not exceed the max.load for tool load rated .
4.The down jarring section takes use of mechanical friction mechanism, the jarring force is well preadjusted by adjusting device before put into downhole.No re-adjustment can be allowed after jar is put into downhole.
API 16C Choke manifold
1.Application
Choke manifold is necessary device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling,as it is,the device is adopted to execute new drilling-well's technique of balance pressure,which can avoid pollution of oil-layer,improve the speed of drilling and control blowout effectively.
One end of the device connects with the side flange of BOP spool.When BOP closes,it can control the finite pressure from casing by adjusting the choke valve's opening,so balanced drilling can work under minimum pressure-difference.
2.Configuration
The choke manifold consists of choke valves,gate valves,line pipes,fittings,pressure gauges and other components.
3.Working Principles
When the pressure inside the well rises,opening/closing the choke valves(including manual chokes,hydraulic chokes and positive chokes)on the choke manifold can allow the release of the fluid inside the well so as to control casing pressure,which can be directly blown out through the gate valve if the casing pressure is quite high.
4.Pressure Ratings
The kill manifold is available in pressure ratings of 2000psi,3000psi,5000psi,10000psi and 15000psi,and also can be available upon customer request.
The blowout preventer(BOP) is an essential pressure control device during driling and operations, as it serves to prevent the uncontrolled leakage of oil/gas from the wells. Over the past 40 years, Shengji has been maintaining and repairing BOPs at the Shengli Oilfield.In 2006, Shengji got its API 16A certificate (certificate No. API 16A-0172) for fabricating BOPs and related accessories. Since then, Shengji has developed three series of BOPs: drilling BOP, workover BOP and oil producing BOP. Shengji can also produce annular BOPs, single ram BOPs and double ram BOPs. The BOP rams are manifold, including: blind ram, pipe ram, shear ram and variable diameter ram. Due to its stable performance and long service life, Shengji BOP wins high praise from our customers.
The Shengli hydraulic ram BOP is mainly used in workover and drilling operations with varied technical requirements. With a BOP body,side outlet, ram body, and other pressure bearing parts crafted from defect-free forged metal, and an oval-shaped inner chamber to reduce stress concentration and improve its sealing performance, this BOP can efficiently prevent an oil well blowout.
The double ram BOP can be equipped with different types of rams, such as pipe ram, blind ram, shear ram or variable diameter ram, to meet different applications. The ram seal is a float type, which will decrease the resisitance and abrasion of the rubber core.The service life is greatly prolonged. Its anti-H2S performance conforms to NACE MR 0175 standard.
Safety Clamp Type T
Safety Clamps Type T are tools for handling flush joint pipes and drill collars. They can accommodate pipes from 1.1/8 to 4.1/2inch. They are designed and manufactured according to API Spec 7K.
Model
Size Range (in)
Total Number of links
WA-T
1 1/8-2
4
2 1/8-3 1/4
5
3 1/2-4 1/2
6
We supply slick drill collars, spiral drill collars and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches. Besides the drill collars in the table below, we can supply other drill collars at customers' request.
Materials:
Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available.
Trepanning and Heat Treatment:
Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface.
Traceability:
Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.
Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.
Cold Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.
Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.
Slip Groove, Elevator Groove and Size:
Lake offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines.
Thread Protectors:
Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
Traceability:
Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.
Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.
Cold Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.
Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.
Slip Groove, Elevator Groove and Size:
Lake offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines.
Thread Protectors:
Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
Ram-type blow out preventer is important equipment used in oil drilling operations. Variable bore ram-type blowout preventer, as a improved type, is capable of sealing around drill pipes with a range of sizes and have advantanges such as low cost and convenience, expatiate on the sealing well mechanism, this paper discusses the structural characterstics of several typres fo variable bore ram, the operation of the varialble bore ram is simulated with the finite element model. the distribution of the stress is analysed, which provides the toudation for optinizing the design of variable bore ram-type blowout preventer
Drilling spool is the parts which are often used in the oilfield for wellhead extension, choke and kill manifold, etc. It is designed and manufactured in accordance with API 6A and API 17K standard, it usually has the same nominal end connections. Eternal company specializes on the manufacturing all sizes and pressure ratings used for oilfield applications. So many spools have been applied on many oilfields all over the world. We can also design customizable ideal spools for reliable and consistent performance on their production system. Our products have been exported to many countries, such as Russia, South Africa, India etc.
Our products could match the following brand:
FMC, CAMERON, CONTROL FLOW, DKG, DRILLQUIP, CE, VECTOGREY, WEATHERFORD, WEIRSEABOARD,WOOD GROUP, WOM, STREAM FLO. EXPRO, MI SWACO, T3.
Application
The spool applies to drilling high pressure oil and gas well, the connecting of the by passage of the spool with the valves and pipes will play not only a role of blowout and choking , but also a role of connecting the BOP with the wellhead.
Pneumatic tube clutch For well drilling rig
Supply API Drawworks Pneumatic Tube Clutch and various spare parts !
Pneumatic clutch is a friction clutch with compressed air as the power source for operation. It is generally used on equipment that needs to transmit large torque and change the rotation direction quickly, such as oil drilling machinery, ships, large mechanical presses,excavators,ball mills, rubber and plastic machinery, etc.
Pneumatic clutch is a friction clutch with compressed air as the control power source.Generally used in the need to transfer large torque and rotating direction at a fast speed of the equipment, such as oil drilling machinery, ships, paper, mining, large mechanical presses, excavators, rubber and plastic machinery.
Pneumatic clutch has large transmission torque, stable engagement, easy to install, vibration absorbing, and can compensate a small amount of angular and radial relative offset of the main and driven axes. The driven part has small inertia, long service life, compact structure and good sealing.However, the deformation resistance of the pneumatic tube is large, the material cost of the pneumatic tube is high, the use temperature is limited, more than 60â?? will reduce the life of the pneumatic tube, lower than -20â?? easy to make the pneumatic tube brittle.
Pneumatic clutch joint components mainly use friction plate, friction shoe and so on.The pneumatic clutch is composed of rim,brake shoe, friction plate, torque bar, release spring and rubber air tube.The working process of the pneumatic clutch is realized by the pneumatic tyre charging and discharging. The pneumatic tyre is the key part of the pneumatic clutch.The rubber air tube is vulcanized by the outer rubber layer, the inner rubber layer, and the curtain cloth layer.
1. Small appearance, but can transmit a lot of rotating force.
2. It has strong durability and wear resistance.
3. Long product life, safe and convenient operation.
4. The clutch can be easily installed or uninstalled when transmitting power.
Pneumatic tube clutch For well drilling rig
Supply API Drawworks Pneumatic Tube Clutch and various spare parts !
Pneumatic clutch is a friction clutch with compressed air as the power source for operation. It is generally used on equipment that needs to transmit large torque and change the rotation direction quickly, such as oil drilling machinery, ships, large mechanical presses,excavators,ball mills, rubber and plastic machinery, etc.
Pneumatic clutch is a friction clutch with compressed air as the control power source.Generally used in the need to transfer large torque and rotating direction at a fast speed of the equipment, such as oil drilling machinery, ships, paper, mining, large mechanical presses, excavators, rubber and plastic machinery.
Pneumatic clutch has large transmission torque, stable engagement, easy to install, vibration absorbing, and can compensate a small amount of angular and radial relative offset of the main and driven axes. The driven part has small inertia, long service life, compact structure and good sealing.However, the deformation resistance of the pneumatic tube is large, the material cost of the pneumatic tube is high, the use temperature is limited, more than 60â?? will reduce the life of the pneumatic tube, lower than -20â?? easy to make the pneumatic tube brittle.
Pneumatic clutch joint components mainly use friction plate, friction shoe and so on.The pneumatic clutch is composed of rim,brake shoe, friction plate, torque bar, release spring and rubber air tube.The working process of the pneumatic clutch is realized by the pneumatic tyre charging and discharging. The pneumatic tyre is the key part of the pneumatic clutch.The rubber air tube is vulcanized by the outer rubber layer, the inner rubber layer, and the curtain cloth layer.
1. Small appearance, but can transmit a lot of rotating force.
2. It has strong durability and wear resistance.
3. Long product life, safe and convenient operation.
4. The clutch can be easily installed or uninstalled when transmitting power.
Pneumatic tube clutch For well drilling rig
Supply API Drawworks Pneumatic Tube Clutch and various spare parts !
Pneumatic clutch is a friction clutch with compressed air as the power source for operation. It is generally used on equipment that needs to transmit large torque and change the rotation direction quickly, such as oil drilling machinery, ships, large mechanical presses,excavators,ball mills, rubber and plastic machinery, etc.
Pneumatic clutch is a friction clutch with compressed air as the control power source.Generally used in the need to transfer large torque and rotating direction at a fast speed of the equipment, such as oil drilling machinery, ships, paper, mining, large mechanical presses, excavators, rubber and plastic machinery.
Pneumatic clutch has large transmission torque, stable engagement, easy to install, vibration absorbing, and can compensate a small amount of angular and radial relative offset of the main and driven axes. The driven part has small inertia, long service life, compact structure and good sealing.However, the deformation resistance of the pneumatic tube is large, the material cost of the pneumatic tube is high, the use temperature is limited, more than 60â?? will reduce the life of the pneumatic tube, lower than -20â?? easy to make the pneumatic tube brittle.
Pneumatic clutch joint components mainly use friction plate, friction shoe and so on.The pneumatic clutch is composed of rim,brake shoe, friction plate, torque bar, release spring and rubber air tube.The working process of the pneumatic clutch is realized by the pneumatic tyre charging and discharging. The pneumatic tyre is the key part of the pneumatic clutch.The rubber air tube is vulcanized by the outer rubber layer, the inner rubber layer, and the curtain cloth layer.
1. Small appearance, but can transmit a lot of rotating force.
2. It has strong durability and wear resistance.
3. Long product life, safe and convenient operation.
4. The clutch can be easily installed or uninstalled when transmitting power.
Pneumatic tube clutch For well drilling rig
Supply API Drawworks Pneumatic Tube Clutch and various spare parts !
Pneumatic clutch is a friction clutch with compressed air as the power source for operation. It is generally used on equipment that needs to transmit large torque and change the rotation direction quickly, such as oil drilling machinery, ships, large mechanical presses,excavators,ball mills, rubber and plastic machinery, etc.
Pneumatic clutch is a friction clutch with compressed air as the control power source.Generally used in the need to transfer large torque and rotating direction at a fast speed of the equipment, such as oil drilling machinery, ships, paper, mining, large mechanical presses, excavators, rubber and plastic machinery.
Pneumatic clutch has large transmission torque, stable engagement, easy to install, vibration absorbing, and can compensate a small amount of angular and radial relative offset of the main and driven axes. The driven part has small inertia, long service life, compact structure and good sealing.However, the deformation resistance of the pneumatic tube is large, the material cost of the pneumatic tube is high, the use temperature is limited, more than 60â?? will reduce the life of the pneumatic tube, lower than -20â?? easy to make the pneumatic tube brittle.
Pneumatic clutch joint components mainly use friction plate, friction shoe and so on.The pneumatic clutch is composed of rim,brake shoe, friction plate, torque bar, release spring and rubber air tube.The working process of the pneumatic clutch is realized by the pneumatic tyre charging and discharging. The pneumatic tyre is the key part of the pneumatic clutch.The rubber air tube is vulcanized by the outer rubber layer, the inner rubber layer, and the curtain cloth layer.
1. Small appearance, but can transmit a lot of rotating force.
2. It has strong durability and wear resistance.
3. Long product life, safe and convenient operation.
4. The clutch can be easily installed or uninstalled when transmitting power.
Sucker Rod Wrench is made of high-quality alloy steel, and boasts and advantages of hardness and abrasion resistance. Its opening is applicable to the square shape of the steel-made sucker rod. The balanced design of wrench can reduce the fatigue of users, which is an outstanding tool for manual mounting and demounting sucker rod.
1. Purpose: suitable for rotary hose for flexible connection between the top of the drilling riser and the vertically movable water faucet in the oil drilling and mud delivery systems, and for the adjustment of installing error between the drilling pump line and the riser for the connection and vibration isolation.
It is also suitable for delivering in large quantity at high pressure the water-based or oil-based mud with the min. Aniline point at 66â?? pumped out of rotary drilling equipment. Moreover, it resists to corrosion from hydrogen sulfide and delivers water, oil, mud and other high-pressure media in borehole operation in oil field.
2. Construction: it made of inner sub or stainless steel armor inner tube, carbon fiber reinforce sub, middle sub, steel wire reinforce sub (steel catenarian line reinforce sub), and carbon fiber outer sub.
3. The product is classified into steel wire reinforcing type and steel link line reinforcing type.
4. Applicable standard: API Spec 7K SY/T5469
5. API emblem practical license Numbers: 7K-0082
ZQ Drill Pipe Power Tong is an ideal wellhead tool for oil drilling,widely applied in madding-up and breaking-out for well drilling and repairing on offshore and land.Ppen-throat design of the ZQ-series with high mobility allows escaping from drilling pipe freely .The tong is a combination of spinning tong and torque tong .It substitutes cathead,suspension tong and spinning rope in making-up and breaking-out.The Tongs are designed and manufactured according to API Spec7kSpecification for Drilling Equipment.
Advantage:
1 TCI tricone bit, steel teeth tricone bit,rock bit,milled tooth bit,tci bit,steel tooth bit
2 Certified by ISO9001&API
3 Wide size code
4 Best price
5 Delivery on time
6 High quality and competitive price
7 rubber seal or metal seal
8 including drill rods,drill collar,rerun steel tooth bits, ,used drill bits stock,used mud pumps,etc
9 be used for water well, oil field, underground, construction, geothermal, directional boring
114-117, 127
Soft Formation Tooth Bits
The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth.
127
Medium-Hard Formation Tooth Bits
The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.
437
Soft Formation TCI Tricone Bits
The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetratione rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
517
Medium Formation TCI Tricone Bits
The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting strcture durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability.
637
Hard Formation TCI Tricone Bits
The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life.
617
Medium-Hard Formation TCI Tricone Bits
The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.
Advantage:
1 TCI tricone bit, steel teeth tricone bit,rock bit,milled tooth bit,tci bit,steel tooth bit
2 Certified by ISO9001&API
3 Wide size code
4 Best price
5 Delivery on time
6 High quality and competitive price
7 rubber seal or metal seal
8 including drill rods,drill collar,rerun steel tooth bits, ,used drill bits stock,used mud pumps,etc
9 be used for water well, oil field, underground, construction, geothermal, directional boring
114-117, 127
Soft Formation Tooth Bits
The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth.
127
Medium-Hard Formation Tooth Bits
The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.
437
Soft Formation TCI Tricone Bits
The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetratione rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
517
Medium Formation TCI Tricone Bits
The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting strcture durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability.
637
Hard Formation TCI Tricone Bits
The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life.
617
Medium-Hard Formation TCI Tricone Bits
The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.
API 6A Standard spacer spool and drilling spool
1. Standard: API
2. Pressure:2000PSI-20000PSI
3. Size: 3 1/8"--26 3/4"
Spacer spool, in accordance with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no provision for suspension of tubular members and which may have no provision for sealing of tubular members
We manufacture the spacer spool in all sizes and pressure ratings suitable for Well Head extension, B.O.P. spacing, and Choke, Kill, and Production Manifold applications. spacer spool usually has the same nominal end connections. spacer spool identification consists of naming each end connection and the overall length (outside of end connection face to outside of end connection face).
We can produce all kinds of API 6A double studded adapter for wellhead use. It is the important device to connection the defferent flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API flange certification.
Pneumatic tube clutch For well drilling rig
Supply API Drawworks Pneumatic Tube Clutch and various spare parts !
Pneumatic clutch is a friction clutch with compressed air as the power source for operation. It is generally used on equipment that needs to transmit large torque and change the rotation direction quickly, such as oil drilling machinery, ships, large mechanical presses,excavators,ball mills, rubber and plastic machinery, etc.
Pneumatic clutch is a friction clutch with compressed air as the control power source.Generally used in the need to transfer large torque and rotating direction at a fast speed of the equipment, such as oil drilling machinery, ships, paper, mining, large mechanical presses, excavators, rubber and plastic machinery.
Pneumatic clutch has large transmission torque, stable engagement, easy to install, vibration absorbing, and can compensate a small amount of angular and radial relative offset of the main and driven axes. The driven part has small inertia, long service life, compact structure and good sealing.However, the deformation resistance of the pneumatic tube is large, the material cost of the pneumatic tube is high, the use temperature is limited, more than 60â?? will reduce the life of the pneumatic tube, lower than -20â?? easy to make the pneumatic tube brittle.
Pneumatic clutch joint components mainly use friction plate, friction shoe and so on.The pneumatic clutch is composed of rim,brake shoe, friction plate, torque bar, release spring and rubber air tube.The working process of the pneumatic clutch is realized by the pneumatic tyre charging and discharging. The pneumatic tyre is the key part of the pneumatic clutch.The rubber air tube is vulcanized by the outer rubber layer, the inner rubber layer, and the curtain cloth layer.
1. Small appearance, but can transmit a lot of rotating force.
2. It has strong durability and wear resistance.
3. Long product life, safe and convenient operation.
4. The clutch can be easily installed or uninstalled when transmitting power.
1. PDC Matrix Body bit
Type and feature
PDC bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",etc.Body type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings.
2. PDC Matrix Body Core Bit
Type and feature
PDC core bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
75/54mm,94/74mm,113/89mm,113/109mm,153/129mm,215/105mm,etc.
3. PDC Steel Body Bit
Type and feature
PDC bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4", etc. Body Type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings
4.PDC Drill Bit Body & Cutters Welding
PDC body(matrix)
Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc.
2.PDC body(steel)
Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc.
Core bit body(matrix or steel)
Main Type:75/54,94/74,113/89,113/109,153/129mm,110/215.9mm, etc.
4.PDC cutter and Welding OEM
PDC Cutters Type : 5/16"(8mm), 1/2"(13mm), 5/8"(16mm), 3/4"(19mm).
1. PDC Matrix Body bit
Type and feature
PDC bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",etc.Body type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings.
2. PDC Matrix Body Core Bit
Type and feature
PDC core bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
75/54mm,94/74mm,113/89mm,113/109mm,153/129mm,215/105mm,etc.
3. PDC Steel Body Bit
Type and feature
PDC bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4", etc. Body Type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings
4.PDC Drill Bit Body & Cutters Welding
PDC body(matrix)
Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc.
2.PDC body(steel)
Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc.
Core bit body(matrix or steel)
Main Type:75/54,94/74,113/89,113/109,153/129mm,110/215.9mm, etc.
4.PDC cutter and Welding OEM
PDC Cutters Type : 5/16"(8mm), 1/2"(13mm), 5/8"(16mm), 3/4"(19mm).
International Standard:
C-Q series: AQ, BQ, NQ, HQ, PQ, BQ3, NQ2, NQ3, HQ3, PQ3
T2 series: T2 76, T2 86, T2 101, others.
Standard of China:
Single tube series: 36, D46, D48, D56, D59, D60, D66, D75, D76, D77, D78, D91, D92, D93, D94, D95, D96, D98, D100, D110, D112, D130, D132,D152, D171, D173, D225, D245, D279, D325
Double tube series: P36, P46, P48, P56, P59, P60, P66, of P75, P76, P77, P91, P94, P110, P130, P150
Rope series: S56, S59, S60, S75, S76, S77, S78, S91, S95, S96, S98
Product Main Material:
Steel, HDPE
Quality Control:
Inspection Standard: API Q1
Applications:
Products are the required parts for oil drill pipes, drill collars or OCTG that can protect the thread of each side of pipe. Mainly thread protectors can prevent your connector threads and pipe end from danagig during handling, transportation and storage.
Product description
1. PDC Matrix Body bit
Type and feature
PDC bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",etc.Body type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings.
2. PDC Matrix Body Core Bit
Type and feature
PDC core bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
75/54mm,94/74mm,113/89mm,113/109mm,153/129mm,215/105mm,etc.
3. PDC Steel Body Bit
Type and feature
PDC bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4", etc. Body Type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings
4.PDC Drill Bit Body & Cutters Welding
PDC body(matrix)
Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc.
2.PDC body(steel)
Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc.
Core bit body(matrix or steel)
Main Type:75/54,94/74,113/89,113/109,153/129mm,110/215.9mm, etc.
4.PDC cutter and Welding OEM
PDC Cutters Type : 5/16"(8mm), 1/2"(13mm), 5/8"(16mm), 3/4"(19mm).
Introduction about product
1. PDC drill bit is super hard material combined with diamond and hard alloy under high temperature. It not only has the advantages of hard and durable from diamond, but also has the advantages of high impact resistance and big blade from hard alloy. It greatly improves the drilling efficiency and is the ideal drill bit for the drill operation of medium & hard as well as super hard rock.
2. Cutting structure is force balanced and bit blade is asymmetrically designed so that the load on bit is balanced that resulting better stability of the bit
3. Main cutter are high performance PDC cutters to insure service life of the bit while improving ROP.
4. Cutter exposure is optimized to insure the oil bit can achieve higher ROP is soft to medium formations
5. Shock absorbers are designed to make the bit capable of drilling through formations with hard strigers
6. Hydraulic system of the bit is optimized using dynamic flow pattern simulation technology to enhance cleaning and cooling effects of the bit to effectively prevent bit from balling
1. ADVANTAGES OF DOWNHOLE MOTOR
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
2. CONSTITUTION
Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) :
Crossover Sub
Safety Catch Sub
Power Section
Coupling Assembly
Bearing Assembly
API DPM Downhole Mud Motor
API Drilling Chinese Downhole Drilling Mud Motor is a kind of downhole drilling tool powered by mud. The mud from mud pump enters motor by way of bypass valve, and a pressure drop between motor inlet and outlet created, such pressure drop will drive the motor rotator to rotate, and transmit the torque and rotary speed to bit by universal shaft and transmission shaft. The downhole motor property mainly depends upon its property parameters. This product uses the high and new technology of coating to avoid coating off of rotors resulted from the traditional technology. Its strength and life are greatly improved. It is applicable to directional drilling horizontal drilling, composite drilling, cluster wells, sidetrack wells and well workover etc
1. About the Manual
The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over).
2. ADVANTAGES OF DOWNHOLE MOTOR
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
3. CONSTITUTION
Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) :
Crossover Sub
Safety Catch Sub
Power Section
Coupling Assembly
Bearing Assembly
Mud motor, Downhole Motor used for HDD machine Rock conditation Drilling, Rock tools
Downhole motor is a kind of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a by-pass valve into the motor. This stream produces pressure loss at both inlet and outlet of the pump, to push the rotor into rotating, and to transmit the torque and speed onto the bit. The downhole motor property mainly depends upon its property parameters.
ADVANTAGES OF DOWNHOLE MOTOR
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
1. Material: High manganese steel
2. Standard: API
3. Features: Big torque, high effective, wide flow rate range, running stable and long using time.
4. Specifications: Fit for 3 1/2"--17 1/2" well hole, including straight body, single- bent and
double-bent construction.
Downhole motor is a kind of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a by-pass valve into the motor. This stream produces pressure loss at both inlet and outlet of the pump, to push the rotor into rotating, and to transmit the torque and speed onto the bit. The downhole motor property mainly depends upon its property parameters.
ADVANTAGES OF DOWNHOLE MOTOR
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
1. Material: High manganese steel
2. Standard: API
3. Features: Big torque, high effective, wide flow rate range, running stable and long using time.
4. Specifications: Fit for 3 1/2"--17 1/2" well hole, including straight body, single- bent and
double-bent construction.
Downhole motor is a kind of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a by-pass valve into the motor. This stream produces pressure loss at both inlet and outlet of the pump, to push the rotor into rotating, and to transmit the torque and speed onto the bit. The downhole motor property mainly depends upon its property parameters.
ADVANTAGES OF DOWNHOLE MOTOR
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
1. Material: High manganese steel
2. Standard: API
3. Features: Big torque, high effective, wide flow rate range, running stable and long using time.
4. Specifications: Fit for 3 1/2"--17 1/2" well hole, including straight body, single- bent and
double-bent construction.
Model SLX side door elevators with square shoulder are suitable for handling tubing, casing, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API 8A/8C Specification for drilling and production hoisting equipment.
Model SLX side door elevators with square shoulder are suitable for handling tubing, casing, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API 8A/8C Specification for drilling and production hoisting equipment.
TA center latch elevators with square shoulder are suitable for handling, drill collar, casing and tubing. The products are designed and manufactured according to the requirements in API Spec 8C specification for Drilling and production Hoisting Equipment
TA center latch elevators with square shoulder are suitable for handling, drill collar, casing and tubing. The products are designed and manufactured according to the requirements in API Spec 8C specification for Drilling and production Hoisting Equipment
The TA Style Elevators are for use on tubing, casing and drill collars. The elevators are balanced for easy handling with safety lock and latch and guarded operating handles. Sizes range from 35 tons to 150 tons and cover all size tubular up to 111/4".
Model SLX side door elevators with square shoulder are suitable for handling tubing, casing, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API 8A/8C Specification for drilling and production hoisting equipment.
Model SLX side door elevators with square shoulder are suitable for handling tubing, casing, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API 8A/8C Specification for drilling and production hoisting equipment.
Model SLX side door elevators with square shoulder are suitable for handling tubing, casing, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API 8A/8C Specification for drilling and production hoisting equipment.
Pilot/ Sonde Housing (2 3/8"~6 5/8" FH)
Connection: Direct connection with drill pipe, Octagonal connection, Side-opening
Octagonal connection back-load transmitter housing
Standard connection side -load transmitter housing
Choose the suitable drill bit based on different soil condition to improve construction efficiency.
Good wearing, connviences to demount and maintain. Available for all makes (XCMG, Ditch Witch, Vermeer, Astec, others) and bolt hole patterns. 3.5", 4", 4.5" and 5" cut.
Sonde Housings with a variety of thread configurations. Our Side-Load Housings are manufactured from American-Made 4140 Alloy. Our Heat Treatment Process and optional Hard Facing give you the wearability you can count on. They are offered for Duck Bill or Carbide Bits.
All of our sonde housings are machined from heat treated 4140 Alloy for superior strength and durability.Side load feature provides for quick installation and removal of transmitter sonde and batteries.Hex-style connection on the 2-3/4" and 3" models provides for quick disconnect from the drillstem.
Pilot/ Sonde Housing (2 3/8"~6 5/8" FH)
Connection: Direct connection with drill pipe, Octagonal connection, Side-opening
Octagonal connection back-load transmitter housing
Standard connection side -load transmitter housing
Choose the suitable drill bit based on different soil condition to improve construction efficiency.
Good wearing, connviences to demount and maintain. Available for all makes (XCMG, Ditch Witch, Vermeer, Astec, others) and bolt hole patterns. 3.5", 4", 4.5" and 5" cut.
Sonde Housings with a variety of thread configurations. Our Side-Load Housings are manufactured from American-Made 4140 Alloy. Our Heat Treatment Process and optional Hard Facing give you the wearability you can count on. They are offered for Duck Bill or Carbide Bits.
All of our sonde housings are machined from heat treated 4140 Alloy for superior strength and durability.Side load feature provides for quick installation and removal of transmitter sonde and batteries.Hex-style connection on the 2-3/4" and 3" models provides for quick disconnect from the drillstem.
1.Standard Fishing Magnet:
Fishing Magnet is a junk retrieval tool designed to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these objects are the result of bit failures, an accumulation of mill cuttings, or simply accidental droppings of unmillable objects. In almost all of these cases, the fish cannot be engaged in the normal manner. Fishing magnets can successfully remove these objects from the hole. The toolâ??s design features generous circulation ports that wash away cuttings and other debris that might interfere with or prevent contact with the magnet. A variety of guides are available to accommodate any retrieval situation.
Construction:
The Fishing Magnet Assembly consists of top sub, housing, magnet element, pole plate, and standard flush guide. The body is manufactured from high strength alloy steel. The magnet element is a powerful permanent magnet. Used properly, it will never lose its charge. The magnet body, housing, and pole plate are threaded and welded together during assembly with the magnet element in place.The standard flush bottom guide is threaded and easily removed.
Operation:
Fishing Magnets are usually run on tubing or drill pipe, but can be run on wireline. Wireline adapters are available. The TOPMAG Fishing Magnet is made up to the bottom of the fishing string and lowered into the hole to within six to twelve inches of the fish. Circulate to wash the fish. Reduce circulation and lower the fishing magnet to the fish. Slowly rotate to ensure positive contact. Discontinue circulation and lift the fishing magnet from the hole.
Optional Accessories:
A flush guide is standard. Lipped guides and mill guides are also available. The lipped guide centralizes the fish to assure contact with the magnet. The mill guide enables milling of any soft formation or settling to free debris at the bottom of the hole.
1.Standard Fishing Magnet:
Fishing Magnet is a junk retrieval tool designed to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these objects are the result of bit failures, an accumulation of mill cuttings, or simply accidental droppings of unmillable objects. In almost all of these cases, the fish cannot be engaged in the normal manner. Fishing magnets can successfully remove these objects from the hole. The toolâ??s design features generous circulation ports that wash away cuttings and other debris that might interfere with or prevent contact with the magnet. A variety of guides are available to accommodate any retrieval situation.
Construction:
The Fishing Magnet Assembly consists of top sub, housing, magnet element, pole plate, and standard flush guide. The body is manufactured from high strength alloy steel. The magnet element is a powerful permanent magnet. Used properly, it will never lose its charge. The magnet body, housing, and pole plate are threaded and welded together during assembly with the magnet element in place.The standard flush bottom guide is threaded and easily removed.
Operation:
Fishing Magnets are usually run on tubing or drill pipe, but can be run on wireline. Wireline adapters are available. The TOPMAG Fishing Magnet is made up to the bottom of the fishing string and lowered into the hole to within six to twelve inches of the fish. Circulate to wash the fish. Reduce circulation and lower the fishing magnet to the fish. Slowly rotate to ensure positive contact. Discontinue circulation and lift the fishing magnet from the hole.
Optional Accessories:
A flush guide is standard. Lipped guides and mill guides are also available. The lipped guide centralizes the fish to assure contact with the magnet. The mill guide enables milling of any soft formation or settling to free debris at the bottom of the hole.
1. Bit Breakers
The Bit Breakers are suitable to make up or break out the drilling bit during the oil well drilling and repairing operations. The Users should be chosen the bit breaker according to the size and model of the drilling bit.
Feature:Improve support and retention
Advantage:Manage the magnitude cutter loading and bit torque
Benefit:Improved bit durability and directional responsiveness
Advantage:Higher nozzle counts and/or fixed ports to best serve cleaning,cooling and cuttings evacuation requirements with available hydraulic flows.Allow for higher flow rates with minimal increase in pump pressure.
2. Detailed introduction to Bit breaker
1>Bit breaker is mainly used to screw on or off a rock bit to the bottom of drill string.
2>It can also prevent the rock bit from dropping into well hole.
3>The price of it is cheap and the use of it is safety and reliable.
4>It is easy to operate. First, the bit breaker is placed on well hole and then put the rock bit onto it. Turn it to screw on or off the bit by turnplate.
Yzbf-120ld air-cooled hydraulic power units
Yzb series of air-cooled (water-cooled) hydraulic power unit supplies hydraulic power for drill equipments in onshore and offshore, especially suitable for hot area in the desert and for continuous working situation. It features small structure, easy operation, wide adjustable range, good heating and radiating. All electric apparatus are explosion-proof.
Hydraulic jar (up / down) designed to use accelerator and flow sub form a coiled tubing short heavy string. The Jar delay device let the energy stored in the stretched and elongated string accelerator, when the energy released will have a great impact, generating shock effect, loose card tool stuck.
Up jarring
Lowering drill string to make drilling jar closed completely (in locking position), elevating drill string by the order of small tonnage to larger tonnage, which make spring and hydraulic cylinder delay, when mandrel move to a position and become release resistance, the spring force stored in drill string will transfer to upforward energy and up jarring. Repeating the above several times can force tool to produce continues up jarring.
Down jarring
Move up and down the drill string to make drilling jar closed completely (in locking position), lowering drill string to make spring compressed and stored energy. When pressure of jar is larger than the desired lower unlocking force, grapple will slide out from mandrel to release the locking and make down jarring. Repeating the above several times can force tool to produce continues down jarring.
Advanced thermal spraying technology is adopted to melt Ni alloy and other high wear-resisting materials on the blank surface of the collar after high temperature flame spraying, so as to reduce the friction coefficient between the anti-wear collar and the oil pipe to 0.01, which is an effective combination of high hardness and low friction, thus improving the service life of the rod and pipe in oil exploitation.
Sucker Rod Coupling
Designed and manufactured according to API spec 11B.
The couplings are manufactured in grades SM and DES.
Increased wear and corrosion resistance.
Surface treatment includes black coating, phosphating or as per the customers requirement.
WIRELINE FLOW TUBES are critical components of the GreaseInjection Control Head. It is absolutely essential that WIRELINE FLOW TUBE Sarechanged frequently in order to properly contain well pressure as the wireline is raisedand lowered into the well bore.We offer a full range of WIRELINE FLOW TUBES at very attractive prices.We invite your direct requests and assure you of our best prices and delivery anywherein the world to meet your requirements.
Tubes with a diameter slightly larger than the braded wireline or slick line that are used in the â??stuffing boxâ?? on a wireline intervention to isolate the well pressure and fluid from the atmosphere. They work in combination with oil or wireline grease injection to form a hydraulic seal.
It is absolutely essential that WIRELINE FLOW TUBES arechanged frequently in order to properly contain well pressure as the wireline is raisedand lowered into the well bore.
Product Name 75kw Power Sewage Pumping Liquids Ansi Centrifugal Pumps
Standard API 685/ISO/ANSI/ASME
Flow rate up to 400 m3/hr
Head up to 80m
Voltage 380V/50HZ; 415V/50HZ, according to different country voltage
Max Pressure 1.6Mpa W
orking temperature -20 �°C to 150 �°C
OEM Accepted 30 year OEM experience,
Certification avaiblale ISO9001:2008, SGS
Production capacity 30,000 sets/year,
1. Module is made from 4135 alloy steel with strict forging and heat treatment process, or Ceramic (Zirconia and Aluminium Oxide).
2. Mud pump fluid end parts offer full lines of Cylinder Head, Valve Lock Cover, Valve Assy, Cylinder Head Threaded Ring, Cylinder head Plug, Valve Cover Plug, Upper Valve Guide, Lower Valve Guide, Liner Threaded Ring, Liner Lock, Wear Plate and much more.
3. Three types of Liner: High chrome sleeve, single shell, zirconia ceremic liner.
4. Pony rod and piston rod is made of premium quality, heat treated alloy steel.
5. Valve and seat assembly are made of forged alloy steel with deep carburized wear surface. We offer a full range of valves and seats which include full open valve and seat, 3 web / 4 web design valve and seat .
Air bag assembly is a part of mud pump, used as pressure balance on mud pump, the max pressure is 5000psi. It is forged by high quality alloy steel 35CrMo or 40CrMnMo, which holding high machinery performance and sprying technology.We can manufacture it used on almost all types of mud pumps or customize in accordance with your request.
features:
1. Pulsation Dampener are forged with 4130 Low-Temperature Resistance Alloy Steel
2. Pulsation Dampener has precise inside chamber size with surface roughness 6.3, increase the life span of the bladder.
3. Available in various materials to meet a wide range of applications
4. We have 7 national patents. We are going to build a complete customer service system, set up a Houston, TX based warehouse for various of expendables.
WIRELINE FLOW TUBES are critical components of the Grease Injection Control Head. It is absolutely essential that WIRELINE FLOW TUBES are changed frequently in order to properly contain well pressure as the wireline is raised and lowered into the well bore. We offer a full range of WIRELINE FLOW TUBES at very attractive prices. We invite your direct requests and assure you of our best prices and delivery anywherein the world to meet your requirements.
Tubes with a diameter slightly larger than the braded wireline or slick line that are used in the stuffing box on a wireline intervention to isolate the well pressure and fluid from the atmosphere. They work in combination with oil or wireline grease injection to form a hydraulic seal.
API Spec 6A 3-1/8" 5000Psi Hydraulic Gate Valve
Gate Valve is used to open or close the pipeline. According to the structure, the gate valves is distributed into rising or non-rising stem gate valve. According to the mode of operation, it is distributed into manual or hydraulic etc. The gate valve is used for drilling fluid manifold, choke manifold, kill manifold and Christmas tree etc.
The plate gate valve is the main component of the Christmas tree, the tubing head, the casing head and the manifolds. It is one of the major products manufactured by YYPMC. In recent years, by making use of advanced technology both at home and aboard, YYPMC has developed an innovated quite a few new designs of the value in terms of products structure and material selection. The products are all manufactured, checked and accepted as per API Spec 6A standard.
API Spec 6A 3-1/8" 5000Psi Hydraulic Gate Valve
Gate Valve is used to open or close the pipeline. According to the structure, the gate valves is distributed into rising or non-rising stem gate valve. According to the mode of operation, it is distributed into manual or hydraulic etc. The gate valve is used for drilling fluid manifold, choke manifold, kill manifold and Christmas tree etc.
The plate gate valve is the main component of the Christmas tree, the tubing head, the casing head and the manifolds. It is one of the major products manufactured by YYPMC. In recent years, by making use of advanced technology both at home and aboard, YYPMC has developed an innovated quite a few new designs of the value in terms of products structure and material selection. The products are all manufactured, checked and accepted as per API Spec 6A standard.
API Spec 6A 3-1/8" 5000Psi Hydraulic Gate Valve
Gate Valve is used to open or close the pipeline. According to the structure, the gate valves is distributed into rising or non-rising stem gate valve. According to the mode of operation, it is distributed into manual or hydraulic etc. The gate valve is used for drilling fluid manifold, choke manifold, kill manifold and Christmas tree etc.
The plate gate valve is the main component of the Christmas tree, the tubing head, the casing head and the manifolds. It is one of the major products manufactured by YYPMC. In recent years, by making use of advanced technology both at home and aboard, YYPMC has developed an innovated quite a few new designs of the value in terms of products structure and material selection. The products are all manufactured, checked and accepted as per API Spec 6A standard.
Shear relief valve is used at the discharge part of the mud pump.JA-3 shear relief valve changes the discharging pressure by changing the position of the shear pin ,which is operation easy and work reliable.
JA-3 type of shear relief valve is used for high pressure drilling rig operation and other medium (water or oil) with high pressure circuit system. To compare with spring type or diaphragm type of relief valve it has the following features:
1. It can be opened , closed and Reset simply;
2. Pressured piston area is small;
3. Be interchangeable and easy to be connected with other mud pump.
Performance Range:
Nominal Pressure PN: 1.6-25.0MPa(150-1500Lb)
Nominal Diameter DN: 50-700mm(2-28inch)
The pigging valve produced in our company is a new device used to clean oil, natural gas, chemicals, water and other fluid transportation pipeline (patent number: ZL 97 2 39827.9). It deals with the launching and receiving of the pig, mainly used for pigging in transportation pipeline to ensure the cleanliness in the pipeline and delivery volume, prolong service life of pipeline and separately deliver different products. It has found its wide application in oil and gas field, oil-gas gathering and transportation, warehouse for oil land gas storage and transportation, chemical port, chemical combination storage and offshore platform.
For larger diameter pigging valve, the original is not easy to operate for larger opening force on bayonet type fast-opening door, our company has developed a new fast-opening door structure which adopts elastic automatic wedge-caulking locking steel belt and horseshoe double-eccentric center lock mechanism and pressure-relief lock and locking mechanism, to realize easy and flexible opening of quick-opening door of large diameter pigging valve and ensure its safety and reliability.
Performance Range:
Nominal Pressure PN: 1.6-25.0MPa(150-1500Lb)
Nominal Diameter DN: 50-700mm(2-28inch)
The pigging valve produced in our company is a new device used to clean oil, natural gas, chemicals, water and other fluid transportation pipeline (patent number: ZL 97 2 39827.9). It deals with the launching and receiving of the pig, mainly used for pigging in transportation pipeline to ensure the cleanliness in the pipeline and delivery volume, prolong service life of pipeline and separately deliver different products. It has found its wide application in oil and gas field, oil-gas gathering and transportation, warehouse for oil land gas storage and transportation, chemical port, chemical combination storage and offshore platform.
For larger diameter pigging valve, the original is not easy to operate for larger opening force on bayonet type fast-opening door, our company has developed a new fast-opening door structure which adopts elastic automatic wedge-caulking locking steel belt and horseshoe double-eccentric center lock mechanism and pressure-relief lock and locking mechanism, to realize easy and flexible opening of quick-opening door of large diameter pigging valve and ensure its safety and reliability.
API 6D High pressure Pig valve foam pig valve
Product Description
The pigging valve produced in our company is a new device used to clean oil, natural gas, chemicals, water and other fluid transportation pipeline (patent number: ZL 97 2 39827.9). It deals with the launching and receiving of the pig, mainly used for pigging in transportation pipeline to ensure the cleanliness in the pipeline and delivery volume, prolong service life of pipeline and separately deliver different products. It has found its wide application in oil and gas field, oil-gas gathering and transportation, warehouse for oil land gas storage and transportation, chemical port, chemical combination storage and offshore platform.
For larger diameter pigging valve, the original is not easy to operate for larger opening force on bayonet type fast-opening door, our company has developed a new fast-opening door structure which adopts elastic automatic wedge-caulking locking steel belt and horseshoe double-eccentric center lock mechanism and pressure-relief lock and locking mechanism, to realize easy and flexible opening of quick-opening door of large diameter pigging valve and ensure its safety and reliability.
Product Overviews
API 6D High pressure Pig valve foam pig valveAPI 6D High pressure Pig valve foam pig valveAPI 6D High pressure Pig valve foam pig valveAPI 6D High pressure Pig valve foam pig valveAPI 6D High pressure Pig valve foam pig valve
Packaging & Shipping
Packing information:
Wooden case, Cartong case, Container or other way, as your request.
API 6D High pressure Pig valve foam pig valve
API 6D High pressure Pig valve foam pig valve
Product Description
The pigging valve produced in our company is a new device used to clean oil, natural gas, chemicals, water and other fluid transportation pipeline (patent number: ZL 97 2 39827.9). It deals with the launching and receiving of the pig, mainly used for pigging in transportation pipeline to ensure the cleanliness in the pipeline and delivery volume, prolong service life of pipeline and separately deliver different products. It has found its wide application in oil and gas field, oil-gas gathering and transportation, warehouse for oil land gas storage and transportation, chemical port, chemical combination storage and offshore platform.
For larger diameter pigging valve, the original is not easy to operate for larger opening force on bayonet type fast-opening door, our company has developed a new fast-opening door structure which adopts elastic automatic wedge-caulking locking steel belt and horseshoe double-eccentric center lock mechanism and pressure-relief lock and locking mechanism, to realize easy and flexible opening of quick-opening door of large diameter pigging valve and ensure its safety and reliability.
Product Overviews
API 6D High pressure Pig valve foam pig valveAPI 6D High pressure Pig valve foam pig valveAPI 6D High pressure Pig valve foam pig valveAPI 6D High pressure Pig valve foam pig valveAPI 6D High pressure Pig valve foam pig valve
Packaging & Shipping
Packing information:
Wooden case, Cartong case, Container or other way, as your request.
API 6D High pressure Pig valve foam pig valve
1.Application
Choke manifold is necessary device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling,as it is,the device is adopted to execute new drilling-well's technique of balance pressure,which can avoid pollution of oil-layer,improve the speed of drilling and control blowout effectively.
One end of the device connects with the side flange of BOP spool.When BOP closes,it can control the finite pressure from casing by adjusting the choke valve's opening,so balanced drilling can work under minimum pressure-difference.
2.Configuration
The choke manifold consists of choke valves,gate valves,line pipes,fittings,pressure gauges and other components.
3.Working Principles
When the pressure inside the well rises,opening/closing the choke valves(including manual chokes,hydraulic chokes and positive chokes)on the choke manifold can allow the release of the fluid inside the well so as to control casing pressure,which can be directly blown out through the gate valve if the casing pressure is quite high.
4.Pressure Ratings
The kill manifold is available in pressure ratings of 2000psi,3000psi,5000psi,10000psi and 15000psi,and also can be available upon customer request.
API 16C Oilfield Choke Manifold for Well Testing
Product Name
manifold
Working Pressure
2000PSI~15000PSI
Nominal Bore
2-1/16"~4-1/16"
Working Medium
oil,natural gas,mud and gas containing H2S,CO2
Working Temperature
-46C~121C
The LAKE DM Gate Valves are solid gate, rising stem, gate valves with resilient seals. They are purpose made for mud, cement, fracturing and water service and are easy to operate and simple to maintain.
The DM Gate Valves with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in todayâ??s oilfield.
DM Series Mud Gate Valves are designed and manufactured in accordance with the following specifications:-
API 6A Specification for Wellhead and Christmas Tree Equipment.
ANSI B31.3 Chemical Plant and Petroleum Refinery Piping.
ASME VIII Boiler and Pressure Vessel Code.
MSS-SP-55 Quality Standard for Steel Castings for Valve, Flanges and Fittings and Other Piping Components.
The choke valve, a main component of Christmas tree, is design to control production rate of the oil well, with working pressure up to 15000psi. Choke valves can be classified as follows: adjustable choke valves and positive choke valves. By rotating hand wheel to move the stem, the adjustable choke valve is designed to adjust the effective area available for the flow to accomplish control of production rate. The positive choke valve is design to accomplish control of production rate by changing flow beans.
Features:
The coupling nut used for connecting the bonnet and body allows fast make-up and break-out.
Stem tip and bean adaptor are fabricated from special carbide alloys for corrosion and abrasion resistance.
�·Indicator lens with scale marks allows the operator to know stemâ??s position and actual orifice area.
�·Turn hand wheel counter-clockwise and the valve will open; turn hand wheel clockwise and the valve will close.
Main technical datum
Working Pressure: 2,000-20,000psi
Nominal Dimension: 2-1/16â?? ~ 7-1/16â??
Working Temperature: P U
Product Specification Levels: PSL1 ~ 4
Performance Requirement: PR1 ~ 2
material Class: AA ~ FF
Working Medium: crude oil; natural gas
Adjustable choke valve
�·Valve needle and spool are made of tungsten carbide, with sufficient corrosion resistant, antieroding and wearable capability.
�·The two kinds of adjustable choke, pintle type and the sleeve type could apply to wellheads& X-mas tree and choke manifold.
Positive choke valve
�·Material of choke bean is fabricated from ceramic and tungsten carbide, with sufficient corrosion resistant, anti-eroding and wearable capability.
�·It adopts union bonnet so as to change choke quickly
�·It has application in wellhead& X-mas tree and choke line.
Introduction:
Used for checking API internal & external thread.
Conform to: API 5B. CSG,LCSG,LP,BCSG,TBG,UPTBG
API Thread Gauges:
Used for checking API internal and external threads.
Spec 5B:
CSG 4-1/2 to 20"
LCSG 4-1/2 to 20"
LP 1/8 to 12"
BCSG 4-1/2 to 6"
TBG1.050 to 4-1/2"
UPTBG 1.050 to 4-1/2"
Drill pipe float valves, or non-return valves, are downhole safety valves that create barriers to prevent unwanted flow of fluids up the drill string.
The float valve locks down the flow of fluids while the crew at the rigfloor is making or breaking connections.
Specifying the optimum drill pipe float valve for oil and gas projects is critical - the different valve types extend further than a simple split between the F-type plunger valves and the G-type flapper valves.
For further reading and to view the complete article by Keystone Energy please visit : 7 Types of Drill Pipe Float Valves.
API 6A 2" 1502 FMC/SPM type plug valves with repair kit
Performance:
1 material and working pressure:
forged of quality high strength alloy steel, are low torque
valves based on the technologies introduced from SPM. 1",2"and 3" plug valves with
rated working pressure of 6000,10000,15000 psi(42,70,105MPa) are available.
2 the working surrounding:
They can work in normal temperature, low temperature or H2S environments.The model of
plug valve available: SF42-1" 2",SF70-1" 2",SF105-1" 2",SF42-2" 2",SF70-2" 2",SF100-2"
2",SF42-3" 3",SF70-3" 3",SF105-3" 3",rated: 6000psi(42MPa)~15000psi(105MPa).
3 the type of end connection:
End connections of plug valves with sizes in English system may be union or male/female thread (LP,TBG), and they can be freely connected with products in international market.
4 the advantage for maintenance :
can be done without removal, and no special tools are needed for removal;
5 good sealing performance:
Visible: There is a visible positioner where we can see if valve is open or closed. Brake spring
will limit the position of valve. 3"hand wheel opener is suitable for opening in low temperature.
Valves can be opened freely and flexibly.
PROVIDE CUSTOMER THE ALL NECESSARY TEHCNCIAL PROBLEM WITH AFTER SALES SERVICES.
AS WELL AS THE INTERNATIONAL THIRD PARTY INSPECTION SERVICES.
PROVIDE CUSTOMER THE ALL NECESSARY TEHCNCIAL PROBLEM WITH AFTER SALES SERVICES.
AS WELL AS THE INTERNATIONAL THIRD PARTY INSPECTION SERVICES.
Plug Valves are used to control flow opena and close. valve bodies are die-forged from premium alloy steel and heat treated to ensure the strength. plugs and seal segments are machined from heat treated alloy steel with special surface treatment to ensure reliable sealing capacity.
Compact structure, easy operation and maintenance.
Union connections on both ends.
Available with manual, handwheel and hydraulic actuators with limiter switches.
Valves can be serviced without removing from the line.
Plug valves for standard service range are available in 1 " to 4 " bore sizes and 6,000psi to 20,000psi rated pressure.
We has also developed plug valves for H2S service in accordance with NACE MR0175 criteria with 1 " to 4 " bore sizes and 10,000psi to 15,000psi rated pressure.
JASON provides a customized design to meet each customers unique requirements.
Recommended service: Fracturing, cementing,acidizing and testing lines;
Plug Valves are used to control flow opena and close. valve bodies are die-forged from premium alloy steel and heat treated to ensure the strength. plugs and seal segments are machined from heat treated alloy steel with special surface treatment to ensure reliable sealing capacity.
Compact structure, easy operation and maintenance.
Union connections on both ends.
Available with manual, handwheel and hydraulic actuators with limiter switches.
Valves can be serviced without removing from the line.
Plug valves for standard service range are available in 1 " to 4 " bore sizes and 6,000psi to 20,000psi rated pressure.
We has also developed plug valves for H2S service in accordance with NACE MR0175 criteria with 1 " to 4 " bore sizes and 10,000psi to 15,000psi rated pressure.
JASON provides a customized design to meet each customers unique requirements.
Recommended service: Fracturing, cementing,acidizing and testing lines;
Performance Range:
Nominal Pressure PN: 1.6-25.0MPa(150-1500Lb)
Nominal Diameter DN: 50-700mm(2-28inch)
The pigging valve produced in our company is a new device used to clean oil, natural gas, chemicals, water and other fluid transportation pipeline (patent number: ZL 97 2 39827.9). It deals with the launching and receiving of the pig, mainly used for pigging in transportation pipeline to ensure the cleanliness in the pipeline and delivery volume, prolong service life of pipeline and separately deliver different products. It has found its wide application in oil and gas field, oil-gas gathering and transportation, warehouse for oil land gas storage and transportation, chemical port, chemical combination storage and offshore platform.
For larger diameter pigging valve, the original is not easy to operate for larger opening force on bayonet type fast-opening door, our company has developed a new fast-opening door structure which adopts elastic automatic wedge-caulking locking steel belt and horseshoe double-eccentric center lock mechanism and pressure-relief lock and locking mechanism, to realize easy and flexible opening of quick-opening door of large diameter pigging valve and ensure its safety and reliability.
1. Mud Pump Parts Valve assembly/Valve body/Valve seat
1.The valve body and valve seat of valve assembly are made from high-quality knot steel treated with 20CrMnTi carburizing and quenching processes.
2.The surface hardness is greater than HRC 60.
3.The conical surface is ground finished to ensure a high requirement for roughness and geometric dimension.
4.The rubber sheet is made of polyurethane material which improves the service life of valve assembly, the operational use time is more than 300 hours.
Different types:
1) Stem-guided Valves& Cross-arms Seats
Stem-guided valve and cross-arms seat features an extra wide metal to metal seal on the valve flange. The serrated upper surface on the valve gives a longer non breathing seal between valve body and insert while the rigid seat cross-arms give greater strength and positibe sealing.
2) Three-wing valves and full open seats.
Three-wing guided valves and full open seats features greater fluid flow than four wing valves, the unibody forged valve features greater strength than traditional welded wing valve. Innovative unibody valve design eliminates snap rings, plates or keepers providing reduced maintenance by snap-on valve inserts and easy installation.
3) Double angle O-ring valve
The Double angle O-ring valve is made with a tough one-piece body to run more hours between change outs. Itâ??s made with carburized premium alloy steel to resist wear, provide a positive seal, and help protect against wash out or damage to the pump.
Our products can fit in with most popular brands of Mud Pump
Design Features:
1. 3 "plug valve worm gear to pay the handwheel turn on the device, both at room temperature orlow temperature environment to open freely, flexible operation.
2. Pressure seal between the sealing the arc piece with the valve body to achieve through the square ring.
3. Maintenance and upkeep of the body seal does not need to be removed from the pipeline,disassembly tool into not need to Chi. Maintenance just want to change the square seals reliablesealing plug.
4. The seal arc sheet and cocks the metal to metal contact surface, through the high-precision machining, so that excellent sealing performance between the sealing arc sheet and cocks.
5. Visualization valve position: cocks cover visual rotary rotary stopper clearly shows that thevalve is fully opened or closed. The brake spring limit of the valve in the desired position.
Parameter
S/N Model Description Rated WPEnd connection
1 SF42-1 1 plug valve 6000psi 2male (LP)
2 SF70-1 1 plug valve 10000psi 2male (LP)
3 SF105-1 1 plug valve 15000psi 2male (LP)
4 SF105-1 1 plug valve 15000psi 2union (F*M)
5 SF42-2 2 plug valve 6000psi 2 female (LP)
6 SF42-2 2 plug valve 6000psi 2union (F*M)
7 SF70-2 2 plug valve 10000psi 2 female (LP)
8 SF105-2 2 plug valve 15000psi 2union (F*M)
9 SF42-3 3 plug valve 6000psi 3female (LP)
10 SF70-3 3 plug valve 10000psi 3female (LP)
11 SF105-3 3 plug valve 15000psi 3union (F*M))
Design Features
1.Stable pressure-bearing: equipped with changeable elastic nitrile rubber sealing ring, firm wall thickness; it is able to bear pressure under high pressure line;
2.Convenient to exchange: union joints on both ends and can be exchanged with LP, UN internationally due to inch size is applied;
3.Simple maintenance: it is unnecessary to dissemble from pipeline to maintain or repair plug valve, and no need to use special tools in case of disassembling;
4.Good sealing and preservation: the plug cock is fine finished by special coating technology;
5.Visible valve position: the symbols of fully open and close of valve are clearly marked on the plug cock cap. The tripping spring restricts valve in proper positions.
Main Technical Parameters of Plug valve
High pressure Plug valve
Specifications buckling size cold working press Terminal connection type Buckle model
SF42
SF70
SF105 1" 2"
2" 2"
3"3" 42Mpa(6000psi)
70Mpa(10000psi)
105Mpa(15000psi) Internal thread ,External thread(LP,NU)
union fig1002
union fig1502
union fig602 M M
MF
F F
Remark:F-threaded joint,M-sphere joint;LP-pipe thread, UN-un-thickening tubing thread
How to place an order:SF105-MF-2"2"-fig 1502 union plug valve
Example:SF105-MF-2"2"-fig 1502 Structure of union plug valve
Model F Plunger Type Float Valve 1F2R-5F6R for Assembly Model F
The Model F Float Valve is a plunger-type float valve that provides a positive instantaneous shut off,providing constant fluid control while drilling,The model F is a reliable and the most economical selection under standard drilling operations.
Model G Flapper Type Float Valve 2F3R-5F6R for Assembly Model G
The Model G is a flapper-type float valve that,when opened ,offers unrestricted bore through the float valve.The uniquely designed flapper closes rapidly to prevent cutting from entering the drill string when circulation stops and also assists primary BOP equipment in maintaining internal pressure control.
Model FA Plunger Type Float Valve 1F2R-5F6R for Assembly Model FA
The Model FA Float Valve has a special port running through the plunger of the float valve,This valve is used when monitoring the bit head for gas pressure and allowing differential pressure measuring when required .The port also permits partial automatic fill during run
Model GA Flapper Type Float Valve 2F3R-5F6R for Assembly Model GA
The Model GA Float Valve is indistinguishable from the Model G with the exception of a tungsten-cabide insert in the flapper valve,The insert has a quarter-inch orifice through the center that allows for differential pressure monitoring .The port also permits partial automatic fill during run in .
API 6A Check Valve, also referred to non-return valve, or one-way valve, is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction. An important concept in check valves is the cracking pressure which is the minimum upstream pressure at which the valve will operate. We can produce both swing type check valve and lift type check valve. Available in bore sizes from 1-13/16³ to 7-1/16³ and pressure ratings from 2,000 to 15,000 PSI. The standard material is forged AISI4130 alloy. All of our Check Valves are fully designed, manufactured, and tested as per 6A and 16C standards and have been widely used on oilfield wellhead Christmas tree and manifolds with reliable performance.
Sealing is energized by flow fluid pressure, sealing performance gets better while pressure increasing.
Hard-faced sealing surface and sulfur-resistant core material assure fine performance of wear-resistant and corrosion-resistant.
Integral forged body with fine mechanical properties.
Check valve shall be hydro tested prior to delivery for safe performance.
China Weco Plug Valve Fmc Plug Valve
Product Description
The plug valve is a necessary part that is utilized on the high pressure manifold for the cementing and fracturing operations in oil field and also suitable to control over the similar high pressure fluid.
Featuring the compact structure, easy maintenance, small torque, rapid opening and easy operation, the plug valve is ideal for the cementing and fracturing manifolds.
The plug valve consists of the valve body, plug cap, plug and etc. The plug valve is available with the union 1502 inlet and outlet preparations(also available upon customer request). The cylinder body inner wall and side segments work together with the rubber seal segments to provide sealing.
The metal to metal sealing is available between the side segments and cylinder plug, featuring high precision and reliability.
The valve can be easily opened or closed even under the 10000psi high pressure.
Overview
Quick Details
Place of Origin:
Shandong, China
Brand Name:
QIF
Model Number:
Ball Valve
Application:
General
Temperature of Media:
Medium Temperature
Power:
Manual
Media:
Water
Port Size:
DN50-DN2000
Structure:
BALL, Trunnion Mounted
Standard or Nonstandard:
Standard
Name:
Trunnion Mounted Carbon Steel Ball Valve with Gear Operation
Type:
2-way
Body:
WCB
Ball:
A105/WCB
Standard:
API
Connection:
Flange/SW
Weight:
depend on size
Paint:
Painting or Spray
Supply Ability
Supply Ability:
8000 Piece/Pieces per Month
Packaging & Delivery
Packaging Details
seaworthy ply wood cases
Lead Time :
Quantity(Pieces) 1 - 1 >1
Est. Time(days) 9 To be negotiated
Trunnion Mounted Carbon Steel Ball Valve with Gear Operation
Product Description
1.Description of Product
Temperature Range: -20C to 190CMaximum
Working Medium: Water, Oil, Gas, Acid, etc
Design: API 6D/API 608; DIN3357; EN 13709; BS5351; JIS 2071
Inspection&Testing: API 598/API 6D; DIN 3230; EN 12266; BS5146; JIS B2003
Face to Face:ASME B16.10; DIN 3202; EN 558; BS2080; JIS B200
2.Application of product
Our goods are widely used on fire fighting, water, marine and oil&gas.
Overview
Quick Details
Place of Origin:
Shandong, China
Brand Name:
QIF
Model Number:
Ball Valve
Application:
General
Temperature of Media:
Medium Temperature
Power:
Manual
Media:
Water
Port Size:
DN50-DN2000
Structure:
BALL, Trunnion Mounted
Standard or Nonstandard:
Standard
Name:
Trunnion Mounted Carbon Steel Ball Valve with Gear Operation
Type:
2-way
Body:
WCB
Ball:
A105/WCB
Standard:
API
Connection:
Flange/SW
Weight:
depend on size
Paint:
Painting or Spray
Supply Ability
Supply Ability:
8000 Piece/Pieces per Month
Packaging & Delivery
Packaging Details
seaworthy ply wood cases
Lead Time :
Quantity(Pieces) 1 - 1 >1
Est. Time(days) 9 To be negotiated
Trunnion Mounted Carbon Steel Ball Valve with Gear Operation
Product Description
1.Description of Product
Temperature Range: -20°C to 190°CMaximum
Working Medium: Water, Oil, Gas, Acid, etc
Design: API 6D/API 608; DIN3357; EN 13709; BS5351; JIS 2071
Inspection&Testing: API 598/API 6D; DIN 3230; EN 12266; BS5146; JIS B2003
Face to Face:ASME B16.10; DIN 3202; EN 558; BS2080; JIS B200
2.Application of product
Our goods are widely used on fire fighting, water, marine and oil&gas.
1.Introduction:
Wellhead Wireline Pressure Control Equipment is used for testing and paraffin treatment in flowing oil well, gas well, water injection well and coalbed methane testing. The unit supplies buffer and transitional area for string running with pressure to hole, could satisfy the wellhead seal requirement and there is no overflow. Simple operating, safe and reliable function. Working pressure is 10MPa, 21MPa, 35MPa, 70MPa and 105MPa. Standard ID is 30mm, 52mm, 62mm (65mm), 76mm(78mm), 89mm, 102mm(103mm), 120mm, 140mm, 160mm and 180mm. Our factory has the ability to design products to adapt to different environment according to clients ' requirements.
The whole Wellhead Wireline Pressure Control Equipment is composed of Grease Injection Control Head, Top Catcher, Lubricator, Bottom Catcher (include testing blowout assly), BOP, Pump-in Tee, Up sheave, Down sheave, Crossover Flange, Quick testing Assly, all kinds of pipes and other components which necessary.
2.Features and Benefits:
1.Grease Injection Control Head is operated by remote hydraulic manual pump, which could seal wellhead in time and promise safety of operation. A lube oil cup mounted on top of Grease Injection Control Head, which is as lubricator for downing cable and assistant for setting tools in well.
2.Top and Bottom Catcher is double safe feature, in order to prevent string tools dropping in well. Top Catcher is by hydraulic remote control, Bottom Catcher has manual operation system if hydraulic system is fault. There is pressure testing blowout sub, which for checking wellhead pressure, releasing left pressure in Lubricator and pressure self-check.
3.Lubricator supplies buffer and transitional area for string tools, which connected by many Union Lubricators. Single Lubricator is 0.8â??3m, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials.
4.BOP could be separated by Single, Dual, Triple and Quad Ram. Hydraulic or Manual control.
5.There is antifreeze& unfreeze and pressure self-check system.
6.Quick testing Assly could improve the safety of BOP, then avoid the second pressure self-check.
7.Up& Down sheave is selected of Aluminium alloy, and has the function of preventing cable jump.
8.Transport and Storage Frame could accommodate full set of Pressure Control Equipments. Has the ability of designing and producing as requirements.
9.According to different service conditions, our factory supply HP/HT Wellhead Wireline Pressure Control Unit with H2S&Acid services.
LAKE Vertical Cuttings Dryer Features & Benefits
Up to 2011,LAKE Solids Control is the only one API & ISO certified manufacturer for the vertical cuttings dryer in China.
The LAKE Vertical Cuttings Dryer uses centrifugal force to dry drilled solids in oil or synthetic base fluids. A stainless steel screen bowl traps â??wetâ?? solids and accelerates them up 890 RPM. Liquid is forced through the screen bowl openings, while â??dryâ?? solids are extracted by the angled flights attached to the cone, which rotate slightly slower than the bowl. Tungsten carbide protects the flights from abrasive solids and ensures long operational life. This aids in maintaining a constant gap between the scroll and screen bowl, which is crucial for proper operation. LAKE cuttings dryer has been done strict balance testing for all major rotary components to minimize vibration & noisy.
LAKE Vertical Cuttings Dryer fixed with individual oil lubrication system with automatic alarm for pressure limit. The main motor and oil pump motor is interlocked with each other for avoiding the start of the main motor prior to the start of the oil pump motor.
Stabbing guides are designed to prevent damage during make up. It manufactured from high-grade steel and Nitrile rubber material or Nylon material , It is easy to operate and can protect the screw thread of the pipes effectively. The guides are used available for tubing, casing and drill pipe.
Generally, stabbing guides are used during making up a string of pipe aligning pin to box threads and preventing face damage and connection failure. A stabbing guide tool is used to facilitate the make up of pipe connections comprising of a diametrally split, hinged and rigid plastics-material infundibulum of high lubricity toughness, and strength adapted to receive and guide a pin connector and having a locating socket adapted to engage a box connector. The tool is spring loaded to closed position by a torsion spring and provided with a pair of hand grip levers to facilitate opening, placement, and removal.
Stabbing Guide
The stabbing guide is adaptable to the outside diameter of the new or worn coupling, through adjusting the length of latch screw.
The stabbing guide has a relatively large guiding conical surface.
The screw thread and coupling are not damaged with composite material used.
The operation of latch lock is flexible and convenient.
Nitrile rubber material or Nylon material is better material for long life operation.
JQHS50Jb Air Winch is kind of manual operated air winch, adopts compressed air as power to drive air motor,
and also drive drum via two-grade gearbox, so as to lift heavy cargo.
The Air Winch is featured as follows:
Small size, light weight, and mobility
Variable speed control
Flexible to forward and backward
Anti-explosive function, reliable operation under inflammable and explosive environment
Safe operation under wet, damp conditions
High starting torque enables start with load, with anti-overload function
For the abovementioned features, it is widely applied in coal and minerals mining, construction
sties, the second platform of oilfield off-sea and inland and so on.
Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well.
options:
The lubricator and riser section range is available with the following options :
3.00â??ID to 9.00â?? ID through bores
3ft to 20ft length options
5,000 Psi, 10,000 Psi and 15,000 Psi working pressures
Standard or sour service
Service temperature range of -29 to +121 �°C
Choice of quick union or API flanged connections
Choice of bleed port connections
Technical Features:
On conventional lubricators, the component parts are screwed together by means of a special TIS acme connection, which has a primary o-ring seal and secondary metal to metal seal
On integral type lubricators, the quick union collars can be very quickly and easily removed for cleaning, inspection, etc
Integral lubricator sections can also be provided with an optional full re-cut facility on quick union connections.
Casing Head Feature:
Casing Head is a new product for satisfying oilfield client's requirement. It has been applied widely for the well completion for different well depth. It is mainly used to fix the drilling Wellhead, connect down hole casing string, seal and control annular pressure.
The house of casing head is made of low alloy steel with high bearing capability and anti-H2S and access to on-site welding. The types of connecting with casing include welding, threading, slipping and BT sealing. The Casing Hanger has conical and rectangular sealing structure with high sealing under the gravity and access to on-site installation.
Brief Introduction
1.The pressure-bearing components are forged, so it has better strength and impact toughness;
2.Floating sealing is applied to the cylinder cover and the open/close of the cover is realized by hydraulic power, so it is quick and convenient for changing rams;
3.The auxiliary oil cylinder affords a smaller volume with same function; double ram Cameron U BOP
4.The ram rubber has massive storage volume, and it adopts self-contained sealing;
5.The standard configuration includes a manual locking device, which ensures the ram is closed tightly in case there is a hydraulic pressure loss;
6.Both the manual and hydraulic locking device and the auxiliary oil cylinder can be installed flexibly into different positions according to customers' requirements, and the installation positions can be changed easily.
Features
(1). Sucker Rod Wrench available for different size.
(2). National best quality with API standard.
(3). Short on deliver time.
(4). Made from heat-treated alloy steel.
(5). Easy to operation.
Caution
(1). Before use, you should choose wrench in line with the Specification of the rod.
(2). After use, it should be cleaned, and pressrved in a cool dry place.
(3). After a period of time of use, it should be checked of wear and tear to ensure that the wrench is in the best working condition.
API cementing collar double stage collar with premium thread
1. Structure:
1) All inner parts are made of easily drillable aluminum alloy
2) The device can be connected directly to same type casing
3) Reliable back-pressure leak proof structure, enable grout or slurry flow with less resistance
4) Valve seat and valve disk can effectively prevent grout from flowing back
5) Hardness of base material is equivalent to API Spec N-80
6) API spec.Q1 and ISO9000 certification
2. Purpose:
It be designed according to the standard of SY/T5476-92, could reduce the mixed slurry, calculate correctly, save the cement and increase cementing quality.
We are producing vavious custom Zirconia Ceramic Liner ceramic sleeve for pump which is high temperature resistant tubes .
Zirconia Ceramic liner Ceramic Sleeve for pump have exceptional hardness and strength, resistance to chemical attack and wear, low dielectric loss and excellent electrical insulation properties. Additionally, Alumina can be metallized for brazing to other metals, highly polished, and comes in a variety of purities depending on it use. Due to these outstanding properties ceramic Alumina tubes are used in a wide range of industrial and advanced applications.
Zirconia Ceramic Liner Ceramic Sleeve for pump exhibits high hardness, good abrasion resistance, high strength, and stability. These products are developed incorporating sophisticated technology and are made available to patrons at market leading prices.
Zirconia Ceramic Liner ceramic sleeve for pump is a unique advanced ceramic. Products manufactured from alumina ceramic exhibit superior mechanical properties such as high strength and flexibility. Heat insulating properties and oxygen-ion conductivity indicate zirconia has potential for use in a wide variety of applications - everything from telecommunications to the new energy of the future and environmentally beneficial products.
Depending on doping material different material properties could be achieved because of influencing the Yttria's microstructure. The "Ceramic Steel" titled Zirconia is doped with Yttria forming an ultra-fine ductile structure with sub-micron grain formation leading to enormous bending strengths. Magnesia doped qualities are less strong also showing a coarser microstructure.
Advantages:
1. Excellent insulation, security, long working life.
2. High temperature resistance.
3. Resistance to electric breakdown.
4. Stand wear and tear.
5. High strength.
6. Corrosion resistance.
7. Good compactness.
8. HIgh hardness.
Ceramic liners have better performance than metal liners in wearproof, corrosion resistant and service life. The material of ceramic liner is the most advanced international increased flexible Zirconium. As per this materal, the tenacity breakpoint is K10--15MPa ( 10 times of the ordinary material), bending strength is �?600--800Mpa with Weber coefficient is m18 and modulus of elestity of E200Gpa. These new ceramic liners are made for superior performance under tough corrosive and abrasive conditions. The HRC is more than 60�°. Each liner is machined to close tolerances to assure ease of installation and long liner life.
Specification
Inner size: 76mm Length: 98mm
Outer size:82mm Thickness: 6mm
Characters:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
10A PISTON of 1piece Composite (STD) 6.5" for PZ-8 Mud Pump
Part No.: 324PZL350
Piston assembly is the expendable parts at the drilling pump hydraulic system, and it is one of the biggest wearing parts of drilling work.
The piston core is made of 42CrMo.
Lake Petro can supply F series,3NB series,9-P-100/13-P-130/12-P-160 series, PZ7/8/9 series of drilling pump piston assembly metric (inch) with various sizes.
The piston rubber is also called the piston cup, its the expendable parts at the drilling pump hydraulic system, and it is one of the biggest wearing parts of drilling work.
The piston rubber is made of rubber vulcanization. The material of ordinary piston rubber is NBR. But if you use the PU can enlarge the work temperature range.
10A PISTON of 1piece Composite (STD) 6.5" for PZ-8 Mud Pump
Part No.: 324PZL350
Piston assembly is the expendable parts at the drilling pump hydraulic system, and it is one of the biggest wearing parts of drilling work.
The piston core is made of 42CrMo.
Lake Petro can supply F series,3NB series,9-P-100/13-P-130/12-P-160 series, PZ7/8/9 series of drilling pump piston assembly metric (inch) with various sizes.
The piston rubber is also called the piston cup, its the expendable parts at the drilling pump hydraulic system, and it is one of the biggest wearing parts of drilling work.
The piston rubber is made of rubber vulcanization. The material of ordinary piston rubber is NBR. But if you use the PU can enlarge the work temperature range.
1. The material of piston rod is 45# steel or 35GrMo. It's used with piston together. And the size of core is included 1 5/8" and 1 1/2''.
2. Piston rods are forged using alloy steel. The intention of products is improved after heat treatment.
3. The surface of product is zincification, nickel-plate, and plating with decorating chrome.
4. After numerical control processing, the products can meet various demands of clients.
1. The material of piston rod is 45# steel or 35GrMo. It's used with piston together. And the size of core is included 1 5/8" and 1 1/2''.
2. Piston rods are forged using alloy steel. The intention of products is improved after heat treatment.
3. The surface of product is zincification, nickel-plate, and plating with decorating chrome.
4. After numerical control processing, the products can meet various demands of clients.
1. The material of piston rod is 45# steel or 35GrMo. It's used with piston together. And the size of core is included 1 5/8" and 1 1/2''.
2. Piston rods are forged using alloy steel. The intention of products is improved after heat treatment.
3. The surface of product is zincification, nickel-plate, and plating with decorating chrome.
4. After numerical control processing, the products can meet various demands of clients.
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
Working Principle:
When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
When you have any demands on BOP, BOP ram, Ram Packers and packing element, freely contact me for best quotation. We can provide you various brand and type product.
Hammer Unions are designed as heavy duty, high pressure flow line connectors, which is commonly applied to chemical plants, on marine dredging vessels, in strip mines and in the oil industry. The color coding system on Hammer Unions represent the different configurations and pressure ratings.
Design Features
1.Stable pressure-bearing: equipped with changeable elastic nitrile rubber sealing ring, firm wall thickness; it is able to bear pressure under high pressure line;
2.Convenient to exchange: union joints on both ends and can be exchanged with LP, UN internationally due to inch size is applied;
3.Simple maintenance: it is unnecessary to dissemble from pipeline to maintain or repair plug valve, and no need to use special tools in case of disassembling;
4.Good sealing and preservation: the plug cock is fine finished by special coating technology;
5.Visible valve position: the symbols of fully open and close of valve are clearly marked on the plug cock cap. The tripping spring restricts valve in proper positions.
Main Technical Parameters of Plug valve
High pressure Plug valve
Specifications buckling size cold working press Terminal connection type Buckle model
SF42
SF70
SF105 1" 2"
2" 2"
3" 3" 42Mpa(6000psi)
70Mpa(10000psi)
105Mpa(15000psi) Internal thread ,External thread(LP,NU)
union fig1002
union fig1502
union fig602 M M
SDML Rotary Slips
Product name :DRILL PIPE SLIPS
Product model :SDS/SDML/SDXL
Range of products :DRILL PIPE SLIPS
Product description :
Drill pipe slips can accommodate drill from3-1/2 " to 5" (60.3.-139.7 mm) O.D. They are classified as type Short (SDS), Medium (SDML) and Extra Long (SDXL) according to gripping length. SDS slips are designed for shallow wells, SDML slips are the perfect choice for all mid- depth wells, SDXL slips are designed for deep wells.
1. Purpose: suitable for rotary hose for flexible connection between the top of the drilling riser and the vertically movable water faucet in the oil drilling and mud delivery systems, and for the adjustment of installing error between the drilling pump line and the riser for the connection and vibration isolation.
It is also suitable for delivering in large quantity at high pressure the water-based or oil-based mud with the min. Aniline point at 66â?? pumped out of rotary drilling equipment. Moreover, it resists to corrosion from hydrogen sulfide and delivers water, oil, mud and other high-pressure media in borehole operation in oil field.
2. Construction: it made of inner sub or stainless steel armor inner tube, carbon fiber reinforce sub, middle sub, steel wire reinforce sub (steel catenarian line reinforce sub), and carbon fiber outer sub.
3. The product is classified into steel wire reinforcing type and steel link line reinforcing type.
4. Applicable standard: API Spec 7K SY/T5469
5. API emblem practical license Numbers: 7K-0082
(1)Standard: API 5CT
(2)Size: 2 3/8"-13 3/8"
(3)Grade: J55,K55,L80,N80.P110
(4Type:STC,LTC,BTC,EUE,NUE surface treatment:coating. Protection of Thread:Thread protector Packing: in bundle,by wooden pallet or by steel strip or by the requirements of customer.
Pup Joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin with couplings hand tight Pin-by-Coupling Box Flush joint connections
Quality is our main competitive advantage
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business
(1)Standard: API 5CT
(2)Size: 2 3/8"-13 3/8"
(3)Grade: J55,K55,L80,N80.P110
(4Type:STC,LTC,BTC,EUE,NUE surface treatment:coating. Protection of Thread:Thread protector Packing: in bundle,by wooden pallet or by steel strip or by the requirements of customer.
Pup Joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin with couplings hand tight Pin-by-Coupling Box Flush joint connections
Quality is our main competitive advantage
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business
(1)Standard: API 5CT
(2)Size: 2 3/8"-13 3/8"
(3)Grade: J55,K55,L80,N80.P110
(4Type:STC,LTC,BTC,EUE,NUE surface treatment:coating. Protection of Thread:Thread protector Packing: in bundle,by wooden pallet or by steel strip or by the requirements of customer.
Pup Joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin with couplings hand tight Pin-by-Coupling Box Flush joint connections
Quality is our main competitive advantage
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business
(1)Standard: API 5CT
(2)Size: 2 3/8"-13 3/8"
(3)Grade: J55,K55,L80,N80.P110
(4Type:STC,LTC,BTC,EUE,NUE surface treatment:coating. Protection of Thread:Thread protector Packing: in bundle,by wooden pallet or by steel strip or by the requirements of customer.
Pup Joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin with couplings hand tight Pin-by-Coupling Box Flush joint connections
Quality is our main competitive advantage
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business
pup joint
(1)Standard: API 5CT
(2)Size: 2 3/8"-13 3/8"
(3)Grade: J55,K55,L80,N80.P110
(4Type:STC,LTC,BTC,EUE,NUE surface treatment:coating. Protection of Thread:Thread protector Packing: in bundle,by wooden pallet or by steel strip or by the requirements of customer.
Pup Joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin with couplings hand tight Pin-by-Coupling Box Flush joint connections
Quality is our main competitive advantage
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business
(1)Standard: API 5CT
(2)Size: 2 3/8"-13 3/8"
(3)Grade: J55,K55,L80,N80.P110
(4Type:STC,LTC,BTC,EUE,NUE surface treatment:coating. Protection of Thread:Thread protector Packing: in bundle,by wooden pallet or by steel strip or by the requirements of customer.
Pup Joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin with couplings hand tight Pin-by-Coupling Box Flush joint connections
Quality is our main competitive advantage
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business
(1)Standard: API 5CT
(2)Size: 2 3/8"-13 3/8"
(3)Grade: J55,K55,L80,N80.P110
(4Type:STC,LTC,BTC,EUE,NUE surface treatment:coating. Protection of Thread:Thread protector Packing: in bundle,by wooden pallet or by steel strip or by the requirements of customer.
Pup Joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin with couplings hand tight Pin-by-Coupling Box Flush joint connections
Quality is our main competitive advantage
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business
Characters:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular bop top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-dn in ans shapes, better performance by combining with ran blowout preventer in the use.
-
Characters:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
-
the mechanical properties in accordance with API standard, such as hardness, strength and impact strength are accorded with standard. All connections are accorded with API Spec. and phosphatized or copper plated in order to improve capacity of resistance to corrosion and anti-galling.
1.Model: ssw40
2. Applicable drill pipes and drill collars size: 3 1/2~9 1/2 in
3.It is mainly composed of two symmetrical components, each of which drives the gear transmission through air motor and drives the wheel rotation.
4. The spinning wrench is a kind of wheel-type spinning tool,
5. The spinning wrench boasts the advantages of large speed, no slippery and no damage to drill pipe,
6.Can be used in oil and mud environment, .With the advange of safety and reliability.
7. Brake torque : 1100ft-lbs(1490 n.M) and the in and out spinning speeds are large
8. During the tripping operation, ssw40 wrench substitutes the spinning rope (spinning chain), so as to make the spinning operation safe and reliable, reduce the labor intensity of drillers, and promote the tripping speed
9. The air motor in the spinner can rotate clockwise and anticlockwise, which makes coring and treatment of drilling troubles more convenient.
-
(1)Standard: API 5CT
(2)Size: 2 3/8"-13 3/8"
(3)Grade: J55,K55,L80,N80.P110
(4Type:STC,LTC,BTC,EUE,NUE surface treatment:coating. Protection of Thread:Thread protector Packing: in bundle,by wooden pallet or by steel strip or by the requirements of customer.
Pup Joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin with couplings hand tight Pin-by-Coupling Box Flush joint connections
Quality is our main competitive advantage
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business
-
Spring casing centralizer
Lake provides various non-welded bow spring centralizers, which are designed and manufactured as per api spec 10d.
The popular styles available are non-welded single bow spring centralizer, and double-bow spring centralizer with high reliable quality, which can be used to replace weatherford centralizer.
Spring centralizer characters
super-strengthen spring steel
model processing, no rivet , no welding
3-section structure for easy transport
starting and resetting force conform to api standard
easy for installation
Rigid casing centralizer
As one useful cement tool, rigid centralizer enables casing run easily in wellbore with its shape of stream-lined. There are two kinds of rigid centralizer available: spiral blade rigid centralizer and straight blade centralizer.
The material for both kinds of centralizers can be cast steel or cast aluminum.
-
pup joint
(1)Standard: API 5CT
(2)Size: 2 3/8"-13 3/8"
(3)Grade: J55,K55,L80,N80.P110
(4Type:STC,LTC,BTC,EUE,NUE surface treatment:coating. Protection of Thread:Thread protector Packing: in bundle,by wooden pallet or by steel strip or by the requirements of customer.
Pup Joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin with couplings hand tight Pin-by-Coupling Box Flush joint connections
Quality is our main competitive advantage
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business
(1)Standard: API 5CT
(2)Size: 2 3/8"-13 3/8"
(3)Grade: J55,K55,L80,N80.P110
(4Type:STC,LTC,BTC,EUE,NUE surface treatment:coating. Protection of Thread:Thread protector Packing: in bundle,by wooden pallet or by steel strip or by the requirements of customer.
Pup Joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin with couplings hand tight Pin-by-Coupling Box Flush joint connections
Quality is our main competitive advantage
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business
(1)Standard: API 5CT
(2)Size: 2 3/8"-13 3/8"
(3)Grade: J55,K55,L80,N80.P110
(4Type:STC,LTC,BTC,EUE,NUE surface treatment:coating. Protection of Thread:Thread protector Packing: in bundle,by wooden pallet or by steel strip or by the requirements of customer.
Pup Joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin with couplings hand tight Pin-by-Coupling Box Flush joint connections
Quality is our main competitive advantage
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business results
High Pressure 90 degree elbow pipe/Swivel joints
Nominal Size:2"-4"
Pressure Rating:2000-15000PSI
Material:Alloy Steel
Standard:API 16C
Pipe Elbows are mainly used for connecting two pipes or tubes,allowing a change of direction.We can provide short radius elbows and long radius elbows.Usually,pipe elbows are made of carbon steels,alloy steels,stainless steel,and etc.
High Pressure 90 degree elbow pipe/Swivel joints
Nominal Size:2"-4"
Pressure Rating:2000-15000PSI
Material:Alloy Steel
Standard:API 16C
Pipe Elbows are mainly used for connecting two pipes or tubes,allowing a change of direction.We can provide short radius elbows and long radius elbows.Usually,pipe elbows are made of carbon steels,alloy steels,stainless steel,and etc.
Specification:
Our GRE oil pipes and fittings had already certificated by API 15HR and API 15LR.
SPECIFICATION:
a. Diameter Range: 43.5mm - 1638mm (1" - 40")
b. Rated Pressure Range:3.45- 34.5MPa
c. Max. Operating Temperature: 110â??
Advantages:
High Pressure GRE Pipe and Fittings is a new, toxic-free and environment-friendly pipe substituting corrugated tube, armored tube and ordinary sand-added glass-reinforced plastic pipe, which is developed by Jingbo based on imported advanced technology in 1990s. As the first of its kind in China and leading in the world, it has effectively eliminated the disadvantages of small caliber, low resistance to impact and low production efficiency and slow construction for armored tube, and high weight and cost for installation for glass-reinforced plastic pipe. While standing very strong internal and external pressure, GRE pipe is light-weighted fast in production low in cost and easy for installation and mounting/dismantling.
Application:
(1) City power grid construction and renovation project
(2) City reconstruction project
(3) Aviation airport project construction
(4) Industrial zone, residential project construction
(5) Traffic road , bridge construction
-
Specification:
Our GRE oil pipes and fittings had already certificated by API 15HR and API 15LR.
SPECIFICATION:
a. Diameter Range: 43.5mm - 1638mm (1" - 40")
b. Rated Pressure Range:3.45- 34.5MPa
c. Max. Operating Temperature: 110â??
Advantages:
High Pressure GRE Pipe and Fittings is a new, toxic-free and environment-friendly pipe substituting corrugated tube, armored tube and ordinary sand-added glass-reinforced plastic pipe, which is developed by Jingbo based on imported advanced technology in 1990s. As the first of its kind in China and leading in the world, it has effectively eliminated the disadvantages of small caliber, low resistance to impact and low production efficiency and slow construction for armored tube, and high weight and cost for installation for glass-reinforced plastic pipe. While standing very strong internal and external pressure, GRE pipe is light-weighted fast in production low in cost and easy for installation and mounting/dismantling.
Application:
(1) City power grid construction and renovation project
(2) City reconstruction project
(3) Aviation airport project construction
(4) Industrial zone, residential project construction
(5) Traffic road , bridge construction
-
Different Size Flange Adapater API 6A(DSA) is mde for connecting two different size flanges.
It is complying with API 6A standard, and all studs and nuts are complying with ASME or NACE.
Casting and forging material is available.
-
Hammer Unions are designed as heavy duty, high pressure flow line connectors, which is commonly applied to chemical plants, on marine dredging vessels, in strip mines and in the oil industry. The color coding system on Hammer Unions represent the different configurations and pressure ratings.
Tubing pup joint
(1)Standard: API 5CT
(2)Size: 2 3/8"-4 1/2"
(3)Grade: J55,K55,L80,N80.P110
(4Type:STC,LTC,BTC,EUE,NUE surface treatment:coating. Protection of Thread:Thread protector Packing: in bundle,by wooden pallet or by steel strip or by the requirements of customer.
Pup Joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin with couplings hand tight Pin-by-Coupling Box Flush joint connections
Quality is our main competitive advantage
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business results
HNBR rubber bladder is composed of rubber pulsation bladder,rubber balance plate and pressure plate bolt, it can reduce the drilling pump pressure fluctuations of instantaneous displacement change;
Make the pump pressure smoothly, protect equipment from damage caused by severe vibration.
the product is also used as stabilizer and vibration absorber for air pump.
Filled with nitrogen in the air or inert gas, in the absence of them,air can replace.But oxygen or combustible gas is forbidden.
Inflation pressure is 20% ~ 30% of the maximum working pressure. The advanced filling pressure is 2.0-2.5 MPa.
Brief Introduction
1.The pressure-bearing components are forged, so it has better strength and impact toughness;
2.Floating sealing is applied to the cylinder cover and the open/close of the cover is realized by hydraulic power, so it is quick and convenient for changing rams;
3.The auxiliary oil cylinder affords a smaller volume with same function; double ram Cameron U BOP
4.The ram rubber has massive storage volume, and it adopts self-contained sealing;
5.The standard configuration includes a manual locking device, which ensures the ram is closed tightly in case there is a hydraulic pressure loss;
6.Both the manual and hydraulic locking device and the auxiliary oil cylinder can be installed flexibly into different positions according to customers' requirements, and the installation positions can be changed easily.
SS316 Shale Shaker Screen / Oil Vibrating Sieving Mesh are the series applied most widely at present. These products can be fit for all kinds of shale shakers that use the hookstrip flat screen. This screen panel is constructed with two or three stainless steel layers bonded to a steel support plank. Accessary rubber plugs may be inserted to the rips or tears of the screen. By doing this, we can cut down time and the production cost. We can supply hookstrip flat screens with mesh sizes ranging from 20 to 325.
Features of SS316 Shale Shaker Screen / Oil Vibrating Sieving Mesh:
1)Different layers with different density. To arrange these layers reasonably and exactly, the screening effect will become more and better. Screen with different mesh counts with suitable opening sizes of the backing plate. Doing so, our products will obtain the largest effective area under the condition of enough strength.
2)The bottom layer with low mesh counts has coarse wire and can be tight bonded to the backing to make up one block. So the strength of whole screen mesh get up and the useful life is increased
3) The mesh, divided into many independent small units by grids of the backing plate, can prevent rigs of tears from spreading overmuch. Accessory prepared rubber stoppers can be used to repair damages. By doing so, the operator can cut down the stop time and reduce the cost.
Composite screen(Shale Shaker Screen)
Composite screen is made by composite plastic frame and stainless steel wire mesh, because the composite plastic material itself has great toughness, plasticity so could increase of service life.
Shaker screens including but not limited to the following types:
1. Steel Frame Shake Screen
2. Composite Frame Shaker Screen
3. Pyramid Shaker Screen
4. Hook Strip Flat Screen
5. Hook Strip Soft Screen
We provides all the API series screens from API 20 to API 400.
Our shale shaker screens are available for the FLC Series. Brandt VSM, Cobra Series, Mi-Swaco, Derrick, NOV Brant, Swaco Mongoose and KEM-TRON shale shakers, and we accept customized shale shaker screen.
Shaker screens including but not limited to the following types:
1. Steel Frame Shake Screen
2. Composite Frame Shaker Screen
3. Pyramid Shaker Screen
4. Hook Strip Flat Screen
5. Hook Strip Soft Screen
We provides all the API series screens from API 20 to API 400.
Our shale shaker screens are available for the FLC Series. Brandt VSM, Cobra Series, Mi-Swaco, Derrick, NOV Brant, Swaco Mongoose and KEM-TRON shale shakers, and we accept customized shale shaker screen.
Type DCS Drill Collar Slips
There are three types of DCS Drill collar slips: S, R and L. They can accommodate drill collars from 3in (76.2mm) to 14in (355.6mm) O.D.. The handling size can be adjusted by changing the quantity of the inserts or slip body. The products are designed and manufactured according to API Spec 7K.
Introduce : Safety Clamps are tools for handling flush joint pipe and drill collar.
There are three types of safety clamps: type WA-T, type WA-C and type MP.
Casing Slips Type UC-3 are multi-segment slips with of 3in/ft on the diameter taper slips (except size 8.5/8"). Every segment of one slip is forced equally while working. Thus the casings could keep a better shape. They should work together with spiders and insert bowls with same taper. The slips are designed and manufactured according to API Spec 7K.
Casing Slips Type UC-3 are multi-segment slips with of 3in/ft on the diameter taper slips (except size 8.5/8"). Every segment of one slip is forced equally while working. Thus the casings could keep a better shape. They should work together with spiders and insert bowls with same taper. The slips are designed and manufactured according to API Spec 7K.
Product Application
The CMS casing slips are designed and manufactured in API 7K and SY/T 5049 " Slips for well drilling" .It is manufactured in a structure of multi-segment pieces with firm structure, light weight , and large holding range, which is easy to fit the changing of the external diameter of the casing pipes due to wear and tear.
Product Application
The CMS casing slips are designed and manufactured in API 7K and SY/T 5049 " Slips for well drilling" .It is manufactured in a structure of multi-segment pieces with firm structure, light weight , and large holding range, which is easy to fit the changing of the external diameter of the casing pipes due to wear and tear.
Product Application
The CMS casing slips are designed and manufactured in API 7K and SY/T 5049 " Slips for well drilling" .It is manufactured in a structure of multi-segment pieces with firm structure, light weight , and large holding range, which is easy to fit the changing of the external diameter of the casing pipes due to wear and tear.
The CMS casing slips are designed and manufactured in API 7K and SY/T 5049 " Slips for well drilling" .It is manufactured in a structure of multi-segment pieces with firm structure, light weight , and large holding range, which is easy to fit the changing of the external diameter of the casing pipes due to wear and tear.
Integral blade stabilizer is an important tools in drilling engineersing to control the well devination, it can stabilze the drilling ttools in the drilling process of oil, gas and geological exloration. it can increase the bit life, drilling speed and well bore quality, there are two kinds of integral stabilizers, spiral blade stabilizer and straight integral blade stabilizer.
Hard fasing type: HF1000, HF2000, HF3000, HF4000 etc.
API 7K Drill stabilizer 9.5in body 23" integral spiral blade stabilizer rotary stabilizer
Tubing & Casing Coupling
Coupling is the joining of two short length pipes by the means of male and female threads.
All types of couplings have internal threads which are known as female thread forms. These thread forms are usually machined so that they can be coupled with the external threads on pipes known as male thread forms. Couplings are strictly designed as per API specifications.
There are two types of tubing couplings widely used in the pipeline coupling manufacturing industries namely:
Non-upset Thread Tubing Coupling
External-upset Thread Tubing Coupling
Oil Pipes
Keywords: API 5CT Steel Pipe, J55, K55, L80, N80Q, C90, T95, P110 Oil Pipe, Tubing, Petroleum Casing Pipe, OCTG
1) Size: O.D. 1.900", 2-3/8", 2-7/8", 3-1/2", 4-1/2"
2) Grade: J55, N80, L80, C90, T95, P110
3) Wall thickness: 3.18 - 10.54mm
4) Length: R1, R2, R3
5) Thread: 8RD and 10RD
6) All our Tubing are designed and manufactured according to API SPEC 5CT standard
Tubing & Casing Coupling
Coupling is the joining of two short length pipes by the means of male and female threads.
All types of couplings have internal threads which are known as female thread forms. These thread forms are usually machined so that they can be coupled with the external threads on pipes known as male thread forms. Couplings are strictly designed as per API specifications.
There are two types of tubing couplings widely used in the pipeline coupling manufacturing industries namely:
Non-upset Thread Tubing Coupling
External-upset Thread Tubing Coupling
Oil Pipes
Keywords: API 5CT Steel Pipe, J55, K55, L80, N80Q, C90, T95, P110 Oil Pipe, Tubing, Petroleum Casing Pipe, OCTG
1) Size: O.D. 1.900", 2-3/8", 2-7/8", 3-1/2", 4-1/2"
2) Grade: J55, N80, L80, C90, T95, P110
3) Wall thickness: 3.18 - 10.54mm
4) Length: R1, R2, R3
5) Thread: 8RD and 10RD
6) All our Tubing are designed and manufactured according to API SPEC 5CT standard
Specification:
Our GRE oil pipes and fittings had already certificated by API 15HR and API 15LR.
SPECIFICATION:
a. Diameter Range: 43.5mm - 1638mm (1" - 40")
b. Rated Pressure Range:3.45- 34.5MPa
c. Max. Operating Temperature: 110â??
It is glassfiber reinforced thermonsetting resin pipeline manufactured by micro-controlled filament winding of expoxy resin and high- strength glassfiber roving.
Production range:
1.Diameter:DN40-DN600
2.Pressure rating:3.45Mpa-34.5Mpa
Production standard: API 15HR-2001 /SY/T6267-2006 for high pressure fiberglass line pipe.
Range for Application:
1.Wastewater transmission or wastewater treatment pipeline;
2.High-pressure delivery line for petroleum, natual gas, saline water, CO2 and H2S 3.Connecting pipes for storage tanks and fire hoses.
Production Characteristics;
1. Excellent mechanical and physical properties, light weight and high strength;
2.Good Corrosion resistance and long services life;
3.No buidup of scale and wax; no secondary contamination;
4. very Smooth inner wall and good flowability of media;
5.Good temperature resistance and can fully neet the requirement of oil production and injection processes;
6.Favorable compressive properties; the normal working pressures are 3.45Mpa to 34.5Mpa;
7. Easy installation and low comprehensive costs.
Application:
(1) City power grid construction and renovation project
(2) City reconstruction project
(3) Aviation airport project construction
(4) Industrial zone, residential project construction
(5) Traffic road , bridge construction
The circulating sub is connected between wellhead pipe string and ground circulating system. When casing is running or finished running, the circulating sub is connected to make fluid circulation. According to the application, the circulating sub is connected between Kelly and casing or between casing and hose. The former is used for fluid circulation during connecting of casing. The later generally is used after connecting of casing.
Construction
The circulating sub during running casing is equipped with casing pin thread on one end or DP thread and DP box thread or union thread on other end.
High Quality FMC Weco Fig / Figure Hammer Union
The Hammer Union type mainly consists of Figure 100, Figure 200, Figure 206, Figure 300, Figure 400, Figure 600, Figure 602, Figure 1002, Figure 1003, Figure 1502 and Figure 2002, figure 2202
Hammer Union
We can provide various hammer unions based on the introduced technologies from other country,including thread connection type,welding type and H2S service unions.1"-6" and CWP of 1000psi-20,000psi unions are available.For easy identification,unions with different pressure ratings will be painted in different colors,and there are evident marks indicating size,connecting mode and pressure ratings.
Seal rings are made of quality rubber compound which greatly enhance load-bearing capacity and sealing performance and protect connectors from erosion.Different pressures and applications have different sealing method.
Fast Installation
Wherever they are,wing nuts and right ACME will ensure quick installation or dismantling without special tools.
Highly Interchangeable
All unions are made in American system,and can be interchanged with products in international market.Seal rings are fully interchangeable with equivalent products;Marks of size and pressure in wing nuts are formed in die-forging model,same as international products.
High Quality FMC Weco Fig / Figure Hammer Union
The Hammer Union type mainly consists of Figure 100, Figure 200, Figure 206, Figure 300, Figure 400, Figure 600, Figure 602, Figure 1002, Figure 1003, Figure 1502 and Figure 2002, figure 2202
Hammer Union
We can provide various hammer unions based on the introduced technologies from other country,including thread connection type,welding type and H2S service unions.1"-6" and CWP of 1000psi-20,000psi unions are available.For easy identification,unions with different pressure ratings will be painted in different colors,and there are evident marks indicating size,connecting mode and pressure ratings.
Seal rings are made of quality rubber compound which greatly enhance load-bearing capacity and sealing performance and protect connectors from erosion.Different pressures and applications have different sealing method.
Fast Installation
Wherever they are,wing nuts and right ACME will ensure quick installation or dismantling without special tools.
Highly Interchangeable
All unions are made in American system,and can be interchanged with products in international market.Seal rings are fully interchangeable with equivalent products;Marks of size and pressure in wing nuts are formed in die-forging model,same as international products.
Factory best price XQ28 sucker rod tong hydraulic power tong
1. Summary
Model XQ28/2.6 hydraulic power tong is an improved type of XYQ1.8 which is used to make up and break out sucker rod thread in Well Service. This product has the following features:
A. The structure is compact ,concise and light.Master tong is driven by low speed large torque hydraulic motor which matching with manual control valve. The backup tong just like a spanner. Total weight is approximately equal to XYQ1.8.
B. The operating is briefness and convenience with high efficiency. Put the respondence size jaw set into master tong and the respondence size glutting into backup tong , turning the reset knob in correct direction then can make up and break out sucker rod by operating manual control valve. Two speed,snapping at low speed, spinning at high speed .
C. Large low gear torque,especially suitable for the instance that is difficult to break out sucker rod thread.
API 7k Casing Manual tong
Product information
1. Structure of Casing Mannual Tongs Description
The casing tongs are designed and manufactured in accordance with the API Spec 7K Specification for Drilling and Well Servicing Equipment and the National Standard for the Petroleum Gas Industry SY/T 5035 Elevator Links Elevators and Tongs which is a useful tool applied to make up and break out drill pipes, coupling hoop of the drill pipe joint casings casing hoops etc.
When raise drill tool up and fall it down. Changing hinge jaws and handling shoulders of latch lug jaws can adjust the handling size of the tongs.
2. Main Features
1) API standard;
2) Very Good Quality;
3) After-sale Service.
Manual tongs are neccessories tools applied to make up and break out pipes. Changing Plug jaws and latch steps can adjust different handing size fo the tongs, they are designed and manufactrued according to API spec 7K specification for drilling and well servicing equipemt.
Fixed diameter hole openeer is used for enlargeing the surface hole which drilled by cone bit in advance, or connected above the cone bit, it applies to onshore and offshore oilfield.
Cutter type
1.SM soft to medium formation.
2. Mh medium to hard formation.
3.XH hard formation.
1. Name: Hummer union
2. Size: 1-8
3. Wall Thickness: sch160, xxs
4. Species: Butt-Welded
5. Material: Alloy Steel, Carbon Steel
Most unusually supplied: 4130, A105
6. Qualification: ISO 9001:2008; Alibaba high quality supplier
7. Package: Plywood cases
8. Surface: Upon customers requirment
9. Delivery Time: Upon customers requirement
10. Payment Term: L/C & T/T at sight
11. Others: High quality with lowest price; fast delivery and best service
Hammer Unions are designed to enjoin mud tanks instantly without having to deal with the flange connections at all. If the mud tanks are not aligned in the right kind of way necessary hammer unions can still be used in order to make absolutely non-leak seals that are tightened. They generally have three parts, a male, a female, and a nut.
The male part is an external threaded portion that is welded on the end of a pipe already connected to a tank wall.The pipe continues further through the nuts towards the O-ring in order to enter into the female part.They are then hammered and tightened together.
Hammer adjustments are the most necessary parts. Unions have a locked up O-ring that is squeezed together into the "D" square cross section area thereby sealing the fluid pressures up to 150 psi in opposition to the external diameter of the connecting pipe in the hammer unions.
WIRELINE FLOW TUBES are critical components of the GreaseInjection Control Head. It is absolutely essential that WIRELINE FLOW TUBESarechanged frequently in order to properly contain well pressure as the wireline is raisedand lowered into the well bore.We offer a full range of WIRELINE FLOW TUBES at very attractive prices.We invite your direct requests and assure you of our best prices and delivery anywherein the world to meet your requirements.
WIRELINE FLOW TUBES are critical components of the Grease Injection Control Head. It is absolutely essential that WIRELINE FLOW TUBES are changed frequently in order to properly contain well pressure as the wireline is raised and lowered into the well bore. We offer a full range of WIRELINE FLOW TUBES at very attractive prices. We invite your direct requests and assure you of our best prices and delivery anywherein the world to meet your requirements.
Tubes with a diameter slightly larger than the braded wireline or slick line that are used in the stuffing box on a wireline intervention to isolate the well pressure and fluid from the atmosphere. They work in combination with oil or wireline grease injection to form a hydraulic seal.
Sucker Rod Wrench is made of high-quality alloy steel, and boasts and advantages of hardness and abrasion resistance. Its opening is applicable to the square shape of the steel-made sucker rod. The balanced design of wrench can reduce the fatigue of users, which is an outstanding tool for manual mounting and demounting sucker rod.
Feature:
(1) . Sucker Rod Wrench available for different size.
(2) . National best quality with API standard.
(3) . Short on deliver time.
(4) . Made from heat-treated alloy steel.
(5) . Easy to operation.
Sucker Rod Wrench is made of high-quality alloy steel, and boasts and advantages of hardness and abrasion resistance. Its opening is applicable to the square shape of the steel-made sucker rod. The balanced design of wrench can reduce the fatigue of users, which is an outstanding tool for manual mounting and demounting sucker rod.
Feature:
(1) . Sucker Rod Wrench available for different size.
(2) . National best quality with API standard.
(3) . Short on deliver time.
(4) . Made from heat-treated alloy steel.
(5) . Easy to operation.
Air winch is a kind of manual operated single drum type air winch. It adopts compressed air as its power to drive air motor to drive air motor, driving drum via two grades gears ( to reduce transmitting speed and enlarge torque) so as to lift and drag heavy cargo. Considering security, this winch is specially designed with hand brake and foot brake. This winch is widely used for drilling, marines, minings, engineering sites, etc to pull heavy cargo.
Features:
1. Small in size, light in weight, high in mobility.
2. Variable speed control, flexible to perform clockwise and anti-clockwise rotation.
3. High practicability with anti-explosive function, especially stable and reliable in inflammable, explosive, wet, damp, and other extremely working environments.
4. High starting torque enables start with load.
5. Anti-overload function.
Technical Parameters
Technical Parameters for JQHSA15 Air Winch (1.5T):
Items
Parameters
Model
JQHSA15
Working Air Pressure (Mpa)
0.7-0.9
Capacity at the First Layer (kN)
15
Rope Speed (m/min)
0-8
Piston Air Motor
Rated Power (kW)
4
Air Consumption (L/s)
130
Drum
Diameter (mm)
175
Width (mm)
200
Wheel Rim Diameter (mm)
350
Rope Diameter (mm)
11
Rope Storage (m)
80
Air Inlet Diameter (inch)
1
Brake Type
Auto Disc Brake
Dimension
Length (mm)
930
Width (mm)
350
Height (mm)
600
Net Weight (kg)
Approx. 190 (Not Including the rope)
Filter, Lubricator, Silencer
Yes
Oilfield Mongoose Shale Shaker Screen
Product Name
Shale Shaker Screen
Type
Composite Screen
Color
Grey
Material
304 & 316
Mesh Range
20-325
Dimension
1165*585mm
Feature
Effective Filtering Area & Long Working Life
Application
Drilling,Oil&Gas Filtration ,Mud Filtration
Composite screen(Shale Shaker Screen)
Pyramid Shale Shaker Screen Features & Benefits
The hook strip shaker screen has many advantages. Due to the difference in mesh number of the screen meshes, the user can get more excellent screening effect by using the screen meshes with rational and correct arrangement. The metal lining is designed with different hole size to match with screen mesh of different mesh number. On the basis of ensuring adequate strength, we strive to obtain the maximum effective area of the screen mesh. Meanwhile, the integration of the bottom coarse wire mesh with small mesh number and metal lining enhances the strength of the whole product and prolongs its lifetime effectively. The grid on the metal lining of the product divides the screen mesh into multiple independent small meshes, which can avoid local damage and excessive expansion. In addition, the product is furnished with special rubber plug which is used for repairing damage. This design can save time and reduce use cost.
-
ZQ drill pipe power tong is an ideal well head tool for oil drilling, widely applied for making-up and breaking-out in offshore and onshore drilling operations and workoveroperations. Open-throat design of the ZQ series allows the tongs to escape from drillingpipe freely with high mobility. The tong is a combination of spinning tong and torque tong. It substitutes cathead, manual tong and rotary rope in making-up and breaking-out. The tongs are designed and manufactured according to API Spec 7K â??Specification for Drilling Equipmentâ?�
ZQ drill pipe power tong is an ideal well head tool for oil drilling, widely applied for making-up and breaking-out in offshore and onshore drilling operations and workoveroperations. Open-throat design of the ZQ series allows the tongs to escape from drillingpipe freely with high mobility. The tong is a combination of spinning tong and torque tong. It substitutes cathead, manual tong and rotary rope in making-up and breaking-out. The tongs are designed and manufactured according to API Spec 7K â??Specification for Drilling Equipmentâ?�
Specifications
API 16A Standard 2 7/8" sucker rod BOP
1. size: 2 7/8"
2.Pressure: 3000 PSi
3. Use for 1 1/4' rod
2 7/8" sucker rod BOP
API standard 2 7/8" sucker rod BOP
API 16A Standard 2 7/8" sucker rod BOP
API Standard 2 7/8" sucker rod BOP
API Standard sucker rod BOP
1. size: 2 7/8"
2.Pressure: 3000 PSi
3. Use for 1 1/4' rod
API Standard 2 7/8" sucker rod BOP
Suck rod bop
1.description of suck rod bop
The Sucker Rod Blowout Preventer is used to prevent oil and gas from leaking, and ensure washing wells and etc
2.Specification of suck rod bop
1.PR1,PSL1-3,TEMP:PU,AA-FF
2.Connection:welding ,thread,
3.API specification
BLOW OUT PREVENTOR 2 â?? 7/8â?� , 3000 PSI, 1-1/4â?� ROD
16" and 20" Slickline Sheave feature a lightweight composite wheel,
high strength aluminum and stainless steel structural components,
and a simple side loading system that provides easy line placement.
Incorporation of cable shrouds above the wheel prevents the line from
"jumping sheave." Side locking design provides in-
PROVIDE CUSTOMER THE ALL NECESSARY TEHCNCIAL PROBLEM WITH AFTER SALES SERVICES.
AS WELL AS THE INTERNATIONAL THIRD PARTY INSPECTION SERVICES.
the mechanical properties in accordance with API standard, such as hardness, strength and impact strength are accorded with standard. All connections are accorded with API Spec. and phosphatized or copper plated in order to improve capacity of resistance to corrosion and anti-galling.
API 16A Standard 2 7/8" sucker rod BOP
1. size: 2 7/8"
2.Pressure: 3000 PSi
3. Use for 1 1/4' rod
2 7/8" sucker rod BOP
API standard 2 7/8" sucker rod BOP
Introduction:
1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA.
2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa).
3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.
4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.
5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment.
6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.
7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
1. Descriptions:
Kelly Valve also named Kelly Cock/Drill Pipe Safety Valve allowing free passage of drilling fluid without pressure loss. The valve can be used as a dill pipe safety valve or upper Kelly valve to control blowout pressures, or as a lower Kelly Valve to prevent loss of drilling fluid when the Kelly is disconnected. It has
a pressure rating of 5,000psi or 10,000psi or 15,000psi
YG SERIES OF HOOK BLOCK
Hook block complies with API 8C standard.
Joining traveling block and hook together reduces overall length and can help satisfying the requirements of top drive operation.
The hook block is equipped with the reliable safety devices on the main hook.
The main parts are made of high strength alloy steels and are subjecte
d to nondestructive testing.
The sheave grooves have been intermediate frequency quenched, which can improve the hardness of the surface, the wearness, and the service life.
The requirements and expectations of our customers must be satisfied
Quality management is integrated into all our business processes
Management is responsible and accountable for quality performance
Quality performance must be assured throughout the supply chain system
Excellence in quality management is necessary for successful business results
Bow Spring Centralizer (slip-on one piece type, hinged non-welded type, hinged welded type slip-on welded type; single bow, double bow)
Rigid Centralizer (roller centralizer, spiral blade type, straight blade type)
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
Working Principle
When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
ModelDimensions (mm)Weight (kg)Working temperatureRange of seal well
1. ADVANTAGES OF DOWNHOLE MOTOR
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
2. CONSTITUTION
Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) :
Product Main Material
Steel,HDPE
Quality Control
Follow the API Q1 quality inspectionstandard. Base on the API 5CT Annex I when design the product.
Applications
Products are the required parts for oildrill pipes and drill color that can protect the thread of each side of pipe.Mainly Thread protectors can prevent your connector threads and pipe end fromdamaging during handling, transportation and storage.
LAKE Reverse Circulation Fishing Magnet is a new fishing tool based on API Standard Fishing Magnet. It combines advantages of Reverse Circulation Fishing Basket and Fishing Magnet. Its unique reverse-circulation design brings better performance on cleaning bottom hole.
Model JZG18A Deadline Anchor:
Max deadline load(Line pull capacity): 180 kN
With hydraulic load sensor.
Constructed with top-quality steel and proof-tested to 150% of rated capacity.
Accommodate wireline sizes 1", 1-1/8" or specify.
Designed and tested for high strength, long life and exceptional accuracy.
Floor mount.
In accordance with API standards. Pass API 8C Certificate, API ISO9001:2000 Certificate, API Q1 Certificate, API TS 29001 Certificate.
Application Areas
JZG20A Deadline Anchor is a mechanism that converts deadline pull of a drilling rig into liquid pressure. It is one of the important components of weight indicating system, which can be used with JZG18.1.5 sensor made by the company to work as the primary instrument, and then makes a weight indicating system together with weight indicator and recorder.
Technical Specifications
1. Maximum deadline pull: 200kN
2. Sensator: JZG18.1.5
3. Error of output pressure f deadline anchor: ±1%
4. Size: 1060mmÃ?762mmÃ?365mm
5. Weight: 550kg
6. Slickline diameter: Φ29mm,Φ26mm
Air winch is a kind of manual operated single drum type air winch. It adopts compressed air as its power to drive air motor to drive air motor, driving drum via two grades gears ( to reduce transmitting speed and enlarge torque) so as to lift and drag heavy cargo. Considering security, this winch is specially designed with hand brake and foot brake. This winch is widely used for drilling, marines, minings, engineering sites, etc to pull heavy cargo.
Features:
1. Small in size, light in weight, high in mobility.
2. Variable speed control, flexible to perform clockwise and anti-clockwise rotation.
3. High practicability with anti-explosive function, especially stable and reliable in inflammable, explosive, wet, damp, and other extremely working environments.
4. High starting torque enables start with load.
5. Anti-overload function.
Extended Casing Tongs
1. Appropriate pipe diameter: 13 3/8â??-30â??
2. Max. Torque: 35 KN.m
3. Executive standard: API Spec 7K
Extended casing tong is used for make-up/break-out casing and casing coupling during petroleum drilling operations.
Pigging Valve
Performance Range:
Nominal Pressure PN: 1.6-25.0MPa(150-1500Lb)
Nominal Diameter DN: 50-700mm(2-28inch)
The pigging valve produced in our company is a new device used to clean oil, natural gas, chemicals, water and other fluid transportation pipeline (patent number: ZL 97 2 39827.9). It deals with the launching and receiving of the pig, mainly used for pigging in transportation pipeline to ensure the cleanliness in the pipeline and delivery volume, prolong service life of pipeline and separately deliver different products. It has found its wide application in oil and gas field, oil-gas gathering and transportation, warehouse for oil land gas storage and transportation, chemical port, chemical combination storage and offshore platform.
For larger diameter pigging valve, the original is not easy to operate for larger opening force on bayonet type fast-opening door, our company has developed a new fast-opening door structure which adopts elastic automatic wedge-caulking locking steel belt and horseshoe double-eccentric center lock mechanism and pressure-relief lock and locking mechanism, to realize easy and flexible opening of quick-opening door of large diameter pigging valve and ensure its safety and reliability.
1. Name: Hummer union
2. Size: 1â??-8â??
3. Wall Thickness: sch160, xxs
4. Species: butt-welded
5. Material: Alloy Steel, Carbon Steel
Most unusually supplied: 4130, A105
6. Qualification: ISO 9001:2008; Alibaba high quality supplier
7. Package: Plywood cases
8. Surface: Upon customerâ??s requirment
9. Delivery Time: Upon customerâ??s requirement
10. Payment Term: L/C & T/T at sight
11. Others: High quality with lowest price; fast delivery and best service
Characters of BOP Spherical Packing Element:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
Specifications
drill stop collar for casing centralizer
1.ISO certificate
2.environmental
3.excellent service, safe shipping
specifications:
stop collar/ stop ring
Hydraulic rubber hose and hose end assembly
Fitting Material:304, 316, 316L,brass&Stainless steel &Carbon steel zinc plating.
Hose Material:synthetic rubber
Working pressure:Max.6,000 psi.
WorkingTemperature:-40 to 120 °C
Thread:BSP, JIC, SAE, UNF, METRIC, NPT, BSPT, DIN2999...etc.
Connection:Male / Female.
Package:Label with necessary information on products, Packaged in plastic bags, Plastic bags in carton boxes, Carbon boxes in wooden pallets or as per customers' request.
Note:Standard or Non-standard as per sample or drawing are all available.
Description:
This series power tong is used for quick make-up/break-out sucker rod in well service operations.The tong is equipped with hydraulic backup tong and use planetary claws to clamp,which is an up to date parent product. It's an ideal choice in well service operation.
Features:
1,Without changing any part within the application range.
2,Adopt the braking belt,reliable braking.
3,Adopt teh petent valve which can solely control teh make-up torque and have over pressure protective function.
4,Choose and buy lengthening guide pole assembly,the backup tong can clamp the tubing body.
5,Torque Control System may be equipped acc to customer's request.
1. Name: Hummer union
2. Size: 1â??-8â??
3. Wall Thickness: sch160, xxs
4. Species: butt-welded
5. Material: Alloy Steel, Carbon Steel
Most unusually supplied: 4130, A105
6. Qualification: ISO 9001:2008; Alibaba high quality supplier
7. Package: Plywood cases
8. Surface: Upon customerâ??s requirment
9. Delivery Time: Upon customerâ??s requirement
10. Payment Term: L/C & T/T at sight
11. Others: High quality with lowest price; fast delivery and best service
The hydraulic ram BOP is mainly used in workover and drilling operations with varied technical requirements. With a BOP body,side outlet, ram body, and other pressure bearing parts crafted from defect-free forged metal, and an oval-shaped inner chamber to reduce stress concentration and improve its sealing performance, this BOP can efficientlyl prevent an oil well blowout.
The double ram BOP can be equipped with different types of rams, such as pipe ram, blind ram, shear ram or variable diameter ram, to meet different applications. The ram seal is a float type, which will decrease the resisitance and abrasion of the rubber core.The service life is greatly prolonged. Its anti-H2S performance conforms to NACE MR 0175 standard.
1.Double ram BOP seals annular space between tubing and casing or wellbore.
2.Double ram BOP suspends and stabilizes string.
3.Double ram BOP with side outlets could be used for choke and blowout.
4.Double ram BOP can be used in operation under pressure.
WT type Drill Collar Slips
1.Certificates;API,CE,ISO.
2.Size:4 1/2in(114.3mm) to 9 1/2in(241.3mm)
3.Best after sale service
