Epoxy Resin Casting Machine

APG Clamping Machines factory
1.high quality clamping mould
2.Supply APG moulds
3.Experienced engineers
4.Long life service

Main Technical Parameters



1.Volmet China supplier Automatic pressure epoxy insulator hydraulic APG injection machine

2.APG machine Application:

APG machine is applicable for small-sized products such as transformer, bushing, post insulator, contact cover, sensor, various supports, etc.





Products

1:Good product quality, fine surface finish of products without bubbles.

2:High efficiency and high automation,only need 1/2 workers operate APG machine,efficiency greatly raised but the intensity of labor is decreased.

3:Chemical resistance,electrical insulation,strength resistance greatly improved.

Main technical parameters
Model -450J VOL-240J VOL-360J
Nominal diameters of enameled wire Ï?0.1~1.5mm Ï?0.1~1.5mm Ï?0.1~1.5mm
Max rotation diameter of coil Ï?450mm Ï?240mm Ï?360mm
Min rotation diameter of coil Ï?50mm Ï?50mm Ï?50mm
Max winding breadth 400mm 210mm 350mm
Winding rotation speed rang 1390rpm 1390rpm 1390rpm
Machine tool power 1.5kW 0.75kW 1.5kW
Input power of machine tool 220V±10% 220V±10% 220V±10%
Outline size of machine tool 1500*600*1450mm 1300*550*1300mm 1300*550*1400mm
Color Blue,Calx,Customizable Blue,Calx,Customizable Blue,Calx,Customizable

� application-standard apg clamping machine

This series belongs to standared apg clamping machine, the min clamp plate size is 600x800mm, and the max clamp plate size is: 800x600mm, can meet production requirement from 11-36kv, such as current transformer, voltage transformer, insulator, bushing, spout, sfg gas-insulated indoor switch disconnector. Etc.

The upper and lower core distance can be customized, foundation pit is necessary if lower core travel distance above 500mm.
main machine technical parameters:


apg claming machine production process:


apg machine work process:
products made by apg machine:
dispatch apg clamping machine:

Commodity: Synthetic Cryolite
Formula: Na3AlF6
M.W.: 209.95

Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.

Specifications:
Appearance white powder
F 52% min
Al 12% min
Na 33% max
SiO2 0.36% max
Fe2O3 0.08% max
CaO 0.5% max
P2O5 0.03% max
SO4 0.6% max
H2O 0.4% max
Loss on ignition 2 % max

Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.

Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.

1. Apg machine produce process 4 steps:
Install and heating mould pre-mixing epoxy compound injection curing
First, install mould on apg clamps heat it up to 60�copen mould, brush mould release agent close mould
Second, pre-mixing casting compound in vacuum pot turn off vacuum valve when vacuum gage show -0.1release vacuum, push vacuum pot nearby apg machine
Third, apg add pressure into vacuum pot and start injecting cast compound into mold, release pressure open mold take out products
Fourth , curing. Move product in to oven.

Main technical parameters
Model -450J VOL-240J VOL-360J
Nominal diameters of enameled wire Ï?0.1~1.5mm Ï?0.1~1.5mm Ï?0.1~1.5mm
Max rotation diameter of coil Ï?450mm Ï?240mm Ï?360mm
Min rotation diameter of coil Ï?50mm Ï?50mm Ï?50mm
Max winding breadth 400mm 210mm 350mm
Winding rotation speed rang 1390rpm 1390rpm 1390rpm
Machine tool power 1.5kW 0.75kW 1.5kW
Input power of machine tool 220V±10% 220V±10% 220V±10%
Outline size of machine tool 1500*600*1450mm 1300*550*1300mm 1300*550*1400mm
Color Blue,Calx,Customizable Blue,Calx,Customizable Blue,Calx,Customizable

Volmet Electricity Technology Co.,Ltd is the only supplier who professional produce APG machine,apg casting machine,apg clamping machine,apg clamping machine for apg process,apg epoxy resin clamping machine ,apg equipment,apg hydraulic molding machine,apg molding machine ,automatic injection moulding apg machine,epoxy insulators apg clamping machine,epoxy resin apg casting machine,epoxy resin apg clamping machine,epoxy resin apg machine,epoxy resin apg molding machine,epoxy resin hydraulic forming machine,APG molds,casting mold and instrument transformer winding machine.
what's more,we offer APG technique training overseas,guarantee clients not only know how to operate machines,but also teach them how to make qualified products.

apg machine frame 1 set
electric power pack 1 set
hydraulic power pack 1 set
mixing frame 1 set
mixing pots 3 sets

·
. Application-Standard APG clamping machinePower saving,APG machine is power saving design,save a lot of cost.More clean,the mixed material wont split out from mold while producing, not only keep workplace clean but also save a lot of material
· Main Machine Technical Parameters

· APG Claming Machine Production Process
·APG machine work process


·Products made by APG machine



· Dispatch APG Clamping Machine

VOL-480 auto ct winding machine is used for winding large sized toroidal shape Coils,is a new generation of winding equipment according to the power industry requiwinding machine feature Large- sized toroidal shape coil CNC circular winding machine
Japan Mitsubishi PLC control High productive,human-computer interaction.
Stepping motor speed control for accurate winding,Winding speed can be specified using the front panel keys.
User friendly control console with touch screen.
High-tech shuttle for highest efficiency.
Microprocessor based controls, easy for program-setting and handling for operator.
Large memory capacity for storing steps of winding.
Password protection for administrative settings as well as operators setting.
Easy programming of multi-step, multi-speed settings.
Heavy machine weight design to avoid machine shaking while winding.
Automatically laying wire, change winding direction.
Realize dual-wire, multi-wire winding, forward and backward winding, preset 100 different kinds of wire data in machine.
Main technical parameters
Model VOL-480
Diameter rang of windable electromagnetic wire Ï?1.0~3.5mm
Min inner diameter of winded coils Ï?200mm
Max outer diameter of winded coils Ï?1500mm
Max height of winded coils 250mm

VOL-1500E auto ct winding machine is used for winding large sized toroidal shape Coils,is a new generation of winding equipment according to the power industry requirement.

YW-1500E winding machine features:

YW-1500E Large- sized toroidal shape coil CNC circular winding machine

Japan Mitsubishi PLC control High productive,human-computer interaction.
Stepping motor speed control for accurate winding,Winding speed can be specified using the front panel keys.
User friendly control console with touch screen.
High-tech shuttle for highest efficiency.
Microprocessor based controls, easy for program-setting and handling for operator.
Large memory capacity for storing steps of winding.
Password protection for administrative settings as well as operators setting.
Easy programming of multi-step, multi-speed settings.
Heavy machine weight design to avoid machine shaking while winding.
Automatically laying wire, change winding direction.
Realize dual-wire, multi-wire winding, forward and backward winding, preset 100 different kinds of wire data in machine.

Main technical parameters
Model VOL-1500E
Diameter rang of windable electromagnetic wire Ï?1.0~3.5mm
Min inner diameter of winded coils Ï?200mm
Max outer diameter of winded coils Ï?1500mm
Max height of winded coils 250mm
Max winding rotation speed 100rpm
Machine tool power 2.2kW
Max outline size of machine tool 1300*1000*1500mm
Color Blue,Calx,Customizable