With more than 16 years experience of manufacturing tungsten carbide dies for the metal working industry,
For wire and bar drawing plant, uko has gained business partners from various direction with positive feedback.
Wire guides can be supplied in the as sintered, ground or ground and polished condition.
Non-standard guides are available upon request.
Carbide wire guide dies including
Tungsten carbide wire guides
Tungsten carbide bush
Carbide bunching and stranding dies
Tungsten carbide straightener dies
We make carbide wire guides which are used in spring manufacturing machines. We use good wear resistant grade carbide for these wire guides for wire cold form industry.
Tungsten carbide wire drawing dies, wire coating dies, pcd dies for drawing use for drawing various ferrous and nonferrous wires Tungsten carbide dies Tungsten carbide drawing dies Tungsten carbide nibs Tungsten carbide wire guide dies Pcd dies Both carbide dies nibs and finished products with steel case are supplied
Tungsten Carbide Wear Parts Carbide Wire Guide Dies / Tube Guide For Extrusion Carbide wire guide is made of tungsten carbide for its extremely hard and wear-resistant features, with sophisticated equipment for precision grinding and polishing, coupled with advanced production and processing technology, the inner and the outer diameter of the hole and tolerance R at less than 0.01mm, the surface roughness over the trough reached Ra 0.025 and above, it requires high hardness, smooth surface in use to reduce injury and other enameled wire. Selected carbide grades are YG6X, YG6, YG8, YG15 and so on. Its service life is 10 times than steel wheels. Introduction of Carbide Wire Guides: High hardness (86 ~ 93HRA, equivalent to 69 ~ 81HRC); Hot hardness (up to 900 ~ 1000 C, keeping 60HRC); Good wear resistance There are V-groove, R-groove, U-groove trough over other. V-groove with 90, 110 , 120 , and other specifications, R-groov ranging from R0.2 to R25. Diameter 500mm available.
Tungsten Carbide Wear Parts Carbide Wire Guide Dies / Tube Guide For Extrusion Carbide wire guide is made of tungsten carbide for its extremely hard and wear-resistant features, with sophisticated equipment for precision grinding and polishing, coupled with advanced production and processing technology, the inner and the outer diameter of the hole and tolerance R at less than 0.01mm, the surface roughness over the trough reached Ra 0.025 and above, it requires high hardness, smooth surface in use to reduce injury and other enameled wire. Selected carbide grades are YG6X, YG6, YG8, YG15 and so on. Its service life is 10 times than steel wheels. Introduction of Carbide Wire Guides: High hardness (86 ~ 93HRA, equivalent to 69 ~ 81HRC); Hot hardness (up to 900 ~ 1000 �°C, keeping 60HRC); Good wear resistance There are V-groove, R-groove, U-groove trough over other. V-groove with 90, 110 , 120 , and other specifications, R-groov ranging from R0.2 to R25. Diameter 500mm available.
1/ general introduction of tungsten carbide wire roller: With more than 16 years experience of manufacturing tungsten carbide rollers for the metal working industry, For wire and bar drawing plant, uko has gained business partners from various direction with positive feedback. Tungsten carbide wire roller including Descaling roller Stress reliving roller Straightening roller Guide roller 2/reference size and application of tungsten carbide wire rodller: Descaling rolls are made of tungsten carbide or steel and are used for the mechanical descaling of entry rod in reduction mills. Stress relieving rolls are made of tungsten carbide to improve the mechanical characteristics of the cold rolled wire. The roll-straightening process is a cold-forming process that uses rollers to provide uniform bending Of wire and/or rod material to change its shape and possible other characteristics for use in subsequent processing.
Supplier: Tungsten carbide rolls, tungsten carbide wire drawing dyes, carbide wire guide dies, carbide nail tools
We company can manufacture tungsten carbide drawing dies according customers' requirements.
Grade:YG15;YGH30 material:100% virgin material and HIP sintered type: PR/CA/FO/CO/RT cartons
We produce tungsten carbide drawing dies in various type such as R, W, S series, Grade YG6 and YG8, various sizes.
Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments. Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer! we can also produce the following types:Z11,w.v.s13,S12,S10,S01,L,13,11 Note: Other specification can be made upon customer's requirements.---chengdu woco carbide
