Polyweb Urethane Fine Screens
Polyweb Urethane Fine Screens is made of polyurethane sheet with high quality screen surface.�Polyurethane fine screen mesh is abrasion resistance and much longer service life than the woven vibrating screen mesh.�Moreover, the property of anti-blinding makes it feasible to screen materials which is considered difficult or impossible to screen previously.�Polyweb Urethane Fine Screens has an extremely fine openings which is as fine as 0.075mm, which is suitable for a wide variety of wet and dry applications.
Polyweb Urethane Fine Screens has extremely fine openings for accurate separation.
Polyweb Urethane Fine Screens with low noise and low maintenance, is the replacement products of perforated vibrating screen mesh.�Additional, the Polyweb Urethane Fine Screens has higher wear resistance and acid and alkali resistance than the woven vibrating screen mesh.
There are hooks on the both side of Polyweb Urethane Fine Screens, which make it easy to install the screen mesh onto vibrating screens.
Polyweb Urethane Fine Screens offer an extended wear life, given their flexible nature and polyurethane coating.�Customers have reported between four and 10 times the life expectancy, dependent on product, regional conditions and finished product size.�Not only does this extend the initial screen cost over a longer period, it also offers a substantial increase in production time available.�Reducing the requirement to stop multiple times a year for change-overs has provided customers with increased capacity equating to $10,000 to $20,000 of increased finished product.�This is without accounting for the labour and machine hire savings.
Comparing the price of the screens is important, as are the potential savings and increased production time available if you dont have to stop.
due to the smooth surface of the Polyweb Urethane Fine Screens.�The unique design and construction of the Polyurethane screen also results in lower operating noise.
Specifications:
Material: polyurethane.
Aperture size: Width: 0.075mm - 1.5mm ,� Length: 2.59mm - 8.2mm.
Life: 6 month - 12 month.
Color: orange, red and as your requests.
Screen size : 700mm x 1040mm is common , other size can be design as your request.
Open area: 20.0% - 40.6%.
Hook: polyurethane or metal.
Huatao Lover Wire Mesh Co.,Ltd.
Key Specifications/Special Features: Applications: - Used in public and private construction the advantage Light transmission: - Fine light transmission (up to 88%) - No yellow, atomization or poor light transmission will occur on boards exposed under - sunshine Weather resistance: - With ultraviolet film on sunshine - It can prevent the resin fatigue or yellowing caused by the ultraviolet and transfer it into the visible light - It has the fine stabilizing effect for the plant photosynthesis (it is extremely applicable for protecting the valuable works of art and items on display) Impact resistance: - Impact strength of PC sheet is 250 to 300 times of the ordinary glass Fire retardant: - Fire retardant grade b1 decided by the national gb8625-88 test, without fire drop or poisonous gas Portability: - Lightweight, it can be cold bent directly - It is convenient for construction and decoration Sound insulation: - With good sound insulation effect, it is the best materials recognized worldwide for sound insulation on expressways applicable range: * Bus station, parking pot, bower, canopy of corridor * Greenhouse, conservatory, roof of swimming pool * Office building, hotel, stadium, lighting system of public facility * Lighting balcony system * Sound barrier for freeway * Advertising lighting box * Replacement of bullet-proof glass * Indoor booth separation, screen, bathroom and indoor decoration * Awning system. 2100*6000,or can be customized.
Fluorescent pigment for plastic injection AS a manufacturer and exporter, NANO-GLO is specialized in daylight fluorescent pigment. We have successfully developed following product series for various industries: AS series - Fine particles,Low cost,Multi-applications PS series - Upgraded, Multi-applications FA series - Solvent type,Multi-applications ZQ series - High temperature resistant & Formaldehyde-free! 1. AS SERIES - Recommended for wide range of applications; A-type gravure inks, vinyl plastisols, organisols, vinyl coated fabric, paper coatings, screen inks, paints, plastics and crayons with melt temperatures less than 190 degree C. 2. PS SERIES - Recommend to use in applications of polar gravure inks, PVC plastisols, paper coatings, PVC screen inks, crayons. 3. FA SERIES - Recommend to use polar solvent systems, paint, PVC screen inks, and PVC plastisols that contain cyclohexanone and other strong polar solvent systems, also useful in water based latex systems where long term shelf-life is required. 4. ZQ SERIES - High temperature resistant & Formaldehyde-free! Lower mold plateout, melt-in, best tinting strength, superior brightness, increased plastic compatibility, fade resistant and excellent heat stability in injection molded plastics to compare with other thermoplastic fluorescent pigment products. The maximum temperature in process is up to 300 degree C. 25 kgs/carton, 8000 kgs/20 FCL
Xps foam board production line Model: pts135-150-xf Output: 300 - 350 kg/h or 180 - 200 m3/24h Model: pts150-200-xf Output: 400 - 550 kg/h or 300 - 320 m3/24h Product: extruded polystyrene (xps) foam board Board width: 600 mm, 900mm, 1200mm after trimmed. Board thickness: 20mm--100mm Density: 30-40kg/ m3 Material: polystyrene(ps) Blowing agent: freon(hfc, hcfc, co2) Standard configration 1 mixing system 2 feeding system 3 primary extruder 4 metering pump 5 hydraulic screen changer 6 secondary extruder 7 slot die 8 oil temperature controller 9 board calibrator 10 first haul-off system 11 take-off system 12 cut-to-width system 13 second haul-off system 14 cut-to-length system 15 electrical control equipment * margin recycle system (ptrecyclertm) * optional finishing machines 1 embossing unit 2 planer (rough; fine) 3 groover (straight; dovetail) 4 edge trimmer (sl; rc; tg) 5 slice cutting machine 6 aluminium foil composite machine Painted with anti-corrosion oil, and covered with plastic film, then packed in wooden box. 1 set in three 40' containers.
Xps production line Model: pts135-150-xf Output: 300 - 350 kg/h or 180 - 200 m3/24h Model: pts150-200-xf Output: 400 - 550 kg/h or 300 - 320 m3/24h Product: extruded polystyrene (xps) foam board Board width: 600 mm, 900mm, 1200mm after trimmed. Board thickness: 20mm--100mm Density: 30-40kg/ m3 Material: polystyrene(ps) Blowing agent: freon(hfc, hcfc, co2) Standard configration 1 mixing system 2 feeding system 3 primary extruder 4 metering pump 5 hydraulic screen changer 6 secondary extruder 7 slot die 8 oil temperature controller 9 board calibrator 10 first haul-off system 11 take-off system 12 cut-to-width system 13 second haul-off system 14 cut-to-length system 15 electrical control equipment * margin recycle system (ptrecyclertm) * optional finishing machines 1 embossing unit 2 planer (rough; fine) 3 groover (straight; dovetail) 4 edge trimmer (sl; rc; tg) 5 slice cutting machine 6 aluminium foil composite machine Painted with anti-corrosion oil, and covered with plastic film, then packed in wooden box. 1 set in three 40' containers.
XPS insulation line Model: PTS135-150-XF Output: 300 - 350 kg/h or 180 - 200 m3/24h Model: PTS150-200-XF Output: 400 - 550 kg/h or 300 - 320 m3/24h Product: Extruded polystyrene (XPS) foam board Board width: 600 mm, 900mm, 1200mm after trimmed. Board thickness: 20mm--100mm Density: 30-40kg/ m3 Material: Polystyrene(PS) Blowing agent: Freon(HFC,HCFC,CO2) Standard configration 1 Mixing system 2 Feeding system 3 Primary extruder 4 Metering pump 5 Hydraulic screen changer 6 Secondary extruder 7 Slot die 8 Oil temperature controller 9 Board calibrator 10 First haul-off system 11 Take-off system 12 Cut-to-width system 13 Second haul-off system 14 Cut-to-length system 15 Electrical control equipment * Margin recycle system (PTRECYCLERTM) * Optional finishing machines 1 Embossing unit 2 Planer (Rough; Fine) 3 Groover (Straight; Dovetail) 4 Edge trimmer (SL; RC; TG) 5 Slice cutting machine 6 Aluminium foil composite machine painted with anti-corrosion oil, and covered with plastic film, then packed in wooden box. 1 set in three 40' containers.
Supplier: Printing Materials Fine Papers ,Commodity Papers Stickers ,Envelops Coated And Un Coated Papers ,Pp Sheets Pvc Sheets ,Screen Printing Inks And Chemical ,Digital Printing Materials ,Binding Materials Kraft Papers
Buyer: Wood Free Papers Kraft Papers Duplex Board Food Board Grease Proof Paper
Supplier: Fine Robusta, Flores Robusta , Ganesha Robusta ,blend, Blonde, Light Blend , Dark Brown , Bold Black, Screen Protector, Anti Virus & Covid 19 Screen Protector, Bioplastic Materials , Europlas Bio Compound , Europlas Bio Mates Bio Filler Masterbatch , Pbat, Pbs Resin, Compound Resin , Bio Degradable Materials For Bags
There are mainly coarse sand, fine sand, double gloss, single gloss, single mirror sand, etc. can be used for leather bags, leather goods, insulating gaskets, electronic nameplates, electronic gaskets; cosmetics, food, clothing, stationery, hardware products And other high-end packaging, can also be used for silk screen printing, light boxes, picture albums, folder covers, album covers, etc.
Polyurethane Strip Sieve also named PU Dewatering Modular screen /PU Dewatering Screen Deck Polyurethane Strip Sieve has following characteristics: 1�Wear resistance, water resistance, corrosion resistance, long service life 2�Fine mesh, not easy to block hole, high screening efficiency 3�Light weight and convenient installation 4�Installation method: screw type, bolt type, rail seat type, pressure bar type Polyurethane Strip Sieve has following applications Polyurethane Strip Sieve is widely applied to tailings dry line, concentrate dewatering, sandstone mine dewatering sieve plate, coal slime dewatering sieve plate, tailings dewatering sieve plate, sand dehydrated sieve plate, sand washer sieve plate, dehydration sieve sieve plate and so on. The customization of Polyurethane Strip Sieve: The conventional thickness of Polyurethane Strip Sieve :30mm-50mm Overall Dimensions:305*305mm 305*610mm 500*550mm 500*600mm 600*600mm 600*700mm Other dimensions can be customized Mesh size:0.1 0.2 0.3 0.5 0.75 1.0 1.5 2.0 2.5 3.0 4.0mm The price is determined by the customized product
