Lck-10 Silicone Pad

LCK-10 silicon pad is a high-performance insulating material substrate of Kapton membrane coating with silicone and has good thermal conductivity and anti-pierce.LCK-10 is designed For those ceramic insulator substitutes like beryllium oxideã??boron nitride and bauxite. As we know that ceramic insulators very expensive and easy broken,however,LCK-10 is hard To broke and the price of it is low.
Features & Benefits:
Heat emission, insulation , fire prevention, shock resistance.
Thermal impedance: 0.41-in2/w(50psi)
Breakdown voltage can reach at 7000V
Designed for the substitutes of the ceramic insulators
Typical Applications:
Heating power components; Automobile electronic heating module; Power module; Household appliances;

Silicon metal #3303 Si:99.0%min. Fe:0.3%max. Al:0.3%max. Ca:0.03%max. Size:10-100mm,90%min. In plastic woven bags of 1 mt each.

Ferro silicon, ferro silicon powder, ferro silicon briquette.

1 High thermal conductivity to 12W/m*K, 1~6W is most common use
2 Low thermal impedance
3 Min 0.1mm thickness
4 Extrem low hardness to 5shore C
5 Extremly low density to 1.2g/cm
6 Approved supplier of Google, Oppo, Vivo

The pad printing silicon rubber is a carrier which transfers the patterns from the steel plate onto the products' surface.
The pad printing silicon rubber has the advantages of good printing effects,good quality,good resilience and without any impurity.
Pad printing silicon rubber is mainly applicable to the printing of irregular patterns on plastics toys,electronplating products,electronic toys, trademarks,artwork gifts ,stationeries etc.

Applications of liquid pad printing silicone rubber
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.

2. Features of liquid pad printing silicone rubber
a. resistance to deformation, high-temperature
b. high printing times
c. good aging resistance
d. exceptional elasticity
e. great printing effect

3. Operation Instructions of liquid pad printing silicone rubber
Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubber.

HY-918 with the advantages of high temperature resistance, abrasion resistance,  good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining. The product is mainly applicable to plastics toys, electroplating products, electronic toys, trademarks and irregular pattern printing. The silicon pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface.

HY-918 is a kind of silicone rubber to make the printing pads for plastic toys, craft works, product printing.

Characteristics
good printing effects
good quality
good resilience
and without any impurity.

No siloxane volatiles
High thermal performance
Exellent compressibility
Low hardness, conformable
Electrical insulation
This product is particularly suitable for silicone sensitive applications, offering low hardness, high electrical insulation and good thermally conductive.

No siloxane volatiles
High thermal performance
Exellent compressibility
Low hardness, conformable
Electrical insulation
Optical precision devices
Telecommunication
Industrial and medical electronics
Automotive ECU
This product is particularly suitable for silicone sensitive applications, offering low hardness, high electrical insulation and good thermally conductive.

Pm150 has excellent thermal conductivity and electrical insulation performance. Not only satisfy for majority
Electronic products thermal insulation requirements, but also widely used in the thermal requirements that are not too high in electronic products. With the stable heat conduction performance, and the product also has the viscosity, easy to use.
Pm150 is using soft silicone material heat-conducting, stable insulation performance, use in transmission
Interface between the electronic equipment and heat sink, which achieve heat transfer and insulation effect.
Applications:
1.Led lighting, lighting equipment
2.Household appliances lcd display
3.Between semiconductor and heat sink
4.Communication product, smart phone, tablet .
5.Desktop, notebook and other portable computer
6.Large power supply etc.
Performance and characteristics:
1.High thermal conductivity, heat transfer coefficient 1.5w/m-k
2.Stable performance, low thermal resistance, effectively improve the heat transfer speed
3.Low hardness, its viscosity high, easy to use
4.By ul and v-o certification standards
Specification:
Standard size : 200mm*400mm, 300mm*300mm, according to customer needs cutting type.
Basic thickness 0.3mm~15mm, special thickness size can be customized
Its slightly viscous, if need to strengthen the adhesive can be according to customer’s requirement
Product color is mass production color, special color can be adjusted to actual situation .

Pm150 has excellent thermal conductivity and electrical insulation performance. Not only satisfy for majority
Electronic products thermal insulation requirements, but also widely used in the thermal requirements that are not too high in electronic products. With the stable heat conduction performance, and the product also has the viscosity, easy to use.
Pm150 is using soft silicone material heat-conducting, stable insulation performance, use in transmission
Interface between the electronic equipment and heat sink, which achieve heat transfer and insulation effect.
Applications:
1.Led lighting, lighting equipment
2.Household appliances lcd display
3.Between semiconductor and heat sink
4.Communication product, smart phone, tablet .
5.Desktop, notebook and other portable computer
6.Large power supply etc.
Performance and characteristics:
1.High thermal conductivity, heat transfer coefficient 1.5w/m-k
2.Stable performance, low thermal resistance, effectively improve the heat transfer speed
3.Low hardness, its viscosity high, easy to use
4.By ul and v-o certification standards
Specification:
Standard size : 200mm*400mm, 300mm*300mm, according to customer needs cutting type.
Basic thickness 0.3mm~15mm, special thickness size can be customized
Its slightly viscous, if need to strengthen the adhesive can be according to customer’s requirement
Product color is mass production color, special color can be adjusted to actual situation .

Pad printing silicone rubber is rtv2 silicone, also called two components silicone or two parts silicone, part A and B will vulcanize in room temperature when A and B mixed.
The mix ratio of tin cure silicone is 100:3, the platinum cure silicone is 9:1.