LC1001 is the semi-flowing heat-resistant silicone adhesive sealant which is made of special silicone rubber material the addition of thermal powders. With excellent conductivity,V0 flame retardant grade, excellent temperature resistance, can be in the range of 60 ~ 280 Long-term use. As well as good adhesion, long term use will not fall off, will not produce Contact gap to reduce thermal conductivity, moisture-proof, anti-seismic, anti-corona, anti-leakage and aging .The properties are widely used for the adhesion and sealing of the electronic components with high thermal conductivity, which is a single part of the acetone oxime type, It can be cured silicone rubber and conforms to the requirements of ROHS REACH UL.
Typical Applications
High power LED lamps and lanterns, electrical power, microwave oven, electronic components and other industrial products of thermal conductive adhesive sealing, alternative thermal conductive silicone used in high-power electric module and radiator thermal conductivity between fixed filling adhesive, no card buckle screw, more reliable filling heat, simple process and lower cost.
Applying Process
1.Surface clean : Clean the surface of the adhesive object and remove the rust, dust and oil.
2.Sizing: Twist the cap of the hose, squeeze the gel into the clean surface, and make it natural.
3.Curing: Place the bonded or sealed parts in the air while them to solidify naturally. Curing is a process from surface to the internal, within 24 hours (at room temperature and 55% relative humidity) will cure the depth of the 2 ~ 4 mm, if the site location is deeper that completely curing time will be postpone, especially it is not easy to come into contact with air. if the temperature is low, cure time also will be postpone .Prior to further processing or wrapping the bonded parts, it is recommended that the user wait long enough to ensure that the adhesion and integrity of the adhesion are not affected.
For more , please kindly feel free to contact
Laminating adhesive water based is a process of pressing two or more materials together to create a new material. This is done to create a material that addresses specific application requirements. Laminating adhesives are used to manufacture toilet paper with new functions by bonding different tissue together
Supplier: Urea 46%, frozen chicken, frozen beef, sugar icumsa 45, soybean, yellow corn, maize, n.p.k for agriculture, npk, glue, lamination glue, based water glue, adhesive, bitumen
Supplier: Pigment , binder, thickener, fixer for pigment printing.
Key Features 1.It has a high thermal conductivity 2.Excellent comprehensive properties, elasticity, non-yellowing, no bleed oil 3.Moisture, dirt and other atmospheric composition proof 4.Relieving the mechanical stress and tension that cased by machinery, heat shock and vibrate 5.Good corona resistance and electrical insulation performance 6.Excellent outdoor aging-resistance for 20-30 years 7.Stable mechanical and electrical properties between -60- C Typical Applications Used for sealing LED lamps, thermal dissipation of auto electrical components, PCB and other heat dissipation components. Gap filling between power transistor, diode thyristor and substrates. Technical Data Table PROPERTY STANDARD/UNITS VALUE Before curing SI1316 SI1317 Color Visual inspection White Viscosity 25 227;C, mPa 8226;s Paste Density 25 227;C, g/cm3 1.65 2.25 Tack free time 25 227;C, 55%RH, min 2~5 2~5 After cured Hardness Shore A 50 1615 Thermal conductivity W/m.K 0.82 1.50 Elongation at break % 150 100 Tensile strength MPa Y1 90 Y2 Shear strength MPa, iron/iron Y1 Y2 Dielectric strength kV/mm, 25 227;C 20 20 Loss factor 1 MHz, 25 227;C 0.09 0.09 Dielectric constant 1 MHz, 25227;C 2.9 2.9 Volume resistance (DC500V) | 8226; cm 2.01014 2.0 1014 SI1316. 310ml/tube, 25 tubes/carton; 100ml/tube, 100 tubes/carton. SI1317. 310ml/tube, 25 tubes/carton
Supplier: Kaaren gypsum powder, white cement, white portland cement, calcium carbonate, clay aggregate, bentonite, travertine, traonyx and onyx stone, gride bars, gypsum ceiling tiles, access panel, screw, sisal fiber, micro silica, silica sand, industrial salt, tiles adhesive, hydrated lime
Supplier: Copy papers, a4, a3, a5, art paper, newsprint paper, kraft paper, jumbo paper, thermal paper, refrigerant gas, ac gas, air conditioner refrigerant, ac cooling gas, mapp gas, r404, r410, r134a, r123, urea fertilizers, ammonium nitrate, npk, dap, map, mop and other organic fertilizers, car and truck tires, hankook michelin tires, car tire 185/65r15 195/65r15 205/55r16 225/50r17 225/55r17 235/50r17 265/60r17, hankook tire, kumho tire, nexen tire, road stone tire, dunlop tire, toyo tire, yokohama tire, michelin tire, chemicals, baby diapers, dog hip and joint chews.
Services: Producer and exporter
This is a pressure-sensitive hotmelt adhesive designed primarily for elastic bonding applications, making it ideal for use in the manufacturing of wet wipes packaging. Its formulation ensures strong bond strength and flexibility, suitable for various substrates used in packaging and elastic bonding contexts.
TSF Granule Hotmelt Adhesive: Used in adhesive applications requiring pressure sensitivity. It is ideal for labels, tapes, and other adhesive products requiring clean and easy application.
P700 HNC Pressure Sensitive Hotmelt: Designed for critical applications, the P700 HNC delivers exceptional performance where a strong, lasting adhesive bond is non-negotiable. designed for sanitary pads position application and developed for high speed machine, also used for mid range speed machines. E600 Pressure Sensitive Hotmelt: The E600 Pressure Sensitive Hotmelt is tailored for industries demanding versatility and durability. Its balanced formulation adheres to a wide range of materials. Designed to use in Elastic bonding and wet wipe packing.
