Polyweb Urethane Fine Screens

Polyweb Urethane Fine Screens
Polyweb Urethane Fine Screens is made of polyurethane sheet with high quality screen surface.�Polyurethane fine screen mesh is abrasion resistance and much longer service life than the woven vibrating screen mesh.�Moreover, the property of anti-blinding makes it feasible to screen materials which is considered difficult or impossible to screen previously.�Polyweb Urethane Fine Screens has an extremely fine openings which is as fine as 0.075mm, which is suitable for a wide variety of wet and dry applications.
Polyweb Urethane Fine Screens has extremely fine openings for accurate separation.
Polyweb Urethane Fine Screens with low noise and low maintenance, is the replacement products of perforated vibrating screen mesh.�Additional, the Polyweb Urethane Fine Screens has higher wear resistance and acid and alkali resistance than the woven vibrating screen mesh.
There are hooks on the both side of Polyweb Urethane Fine Screens, which make it easy to install the screen mesh onto vibrating screens.
Polyweb Urethane Fine Screens offer an extended wear life, given their flexible nature and polyurethane coating.�Customers have reported between four and 10 times the life expectancy, dependent on product, regional conditions and finished product size.�Not only does this extend the initial screen cost over a longer period, it also offers a substantial increase in production time available.�Reducing the requirement to stop multiple times a year for change-overs has provided customers with increased capacity equating to $10,000 to $20,000 of increased finished product.�This is without accounting for the labour and machine hire savings.
Comparing the price of the screens is important, as are the potential savings and increased production time available if you dont have to stop.
due to the smooth surface of the Polyweb Urethane Fine Screens.�The unique design and construction of the Polyurethane screen also results in lower operating noise.
Specifications:
Material: polyurethane.
Aperture size: Width: 0.075mm - 1.5mm ,� Length: 2.59mm - 8.2mm.
Life: 6 month - 12 month.
Color: orange, red and as your requests.
Screen size : 700mm x 1040mm is common , other size can be design as your request.
Open area: 20.0% - 40.6%.
Hook: polyurethane or metal.
Huatao Lover Wire Mesh Co.,Ltd.

Polyweb Urethane Fine Screens
Polyweb Urethane Fine Screens is made of polyurethane sheet with high quality screen surface. Polyurethane fine screen mesh is abrasion resistance and much longer service life than the woven vibrating screen mesh. Moreover, the property of anti-blinding makes it feasible to screen materials which is considered difficult or impossible to screen previously. Polyweb Urethane Fine Screens has an extremely fine openings which is as fine as 0.075mm, which is suitable for a wide variety of wet and dry applications.
Polyweb Urethane Fine Screens has extremely fine openings for accurate separation.
Polyweb Urethane Fine Screens with low noise and low maintenance, is the replacement products of perforated vibrating screen mesh. Additional, the Polyweb Urethane Fine Screens has higher wear resistance and acid and alkali resistance than the woven vibrating screen mesh.
There are hooks on the both side of Polyweb Urethane Fine Screens, which make it easy to install the screen mesh onto vibrating screens.
Polyweb Urethane Fine Screens offer an extended wear life, given their flexible nature and polyurethane coating. Customers have reported between four and 10 times the life expectancy, dependent on product, regional conditions and finished product size. Not only does this extend the initial screen cost over a longer period, it also offers a substantial increase in production time available. Reducing the requirement to stop multiple times a year for change-overs has provided customers with increased capacity equating to $10,000 to $20,000 of increased finished product. This is without accounting for the labour and machine hire savings.
Comparing the price of the screens is important, as are the potential savings and increased production time available if you dont have to stop.
due to the smooth surface of the Polyweb Urethane Fine Screens. The unique design and construction of the Polyurethane screen also results in lower operating noise.
Specifications:
Material: polyurethane.
Aperture size: Width: 0.075mm - 1.5mm ,  Length: 2.59mm - 8.2mm.
Life: 6 month - 12 month.
Color: orange, red and as your requests.
Screen size : 700mm x 1040mm is common , other size can be design as your request.
Open area: 20.0% - 40.6%.
Hook: polyurethane or metal.
Huatao Lover Wire Mesh Co.,Ltd.

Polyweb Urethane Fine Screens
Polyweb Urethane Fine Screens is made of polyurethane sheet with high quality screen surface. Polyurethane fine screen mesh is abrasion resistance and much longer service life than the woven vibrating screen mesh. Moreover, the property of anti-blinding makes it feasible to screen materials which is considered difficult or impossible to screen previously. Polyweb Urethane Fine Screens has an extremely fine openings which is as fine as 0.075mm, which is suitable for a wide variety of wet and dry applications.
Polyweb Urethane Fine Screens has extremely fine openings for accurate separation.
Polyweb Urethane Fine Screens with low noise and low maintenance, is the replacement products of perforated vibrating screen mesh. Additional, the Polyweb Urethane Fine Screens has higher wear resistance and acid and alkali resistance than the woven vibrating screen mesh.
There are hooks on the both side of Polyweb Urethane Fine Screens, which make it easy to install the screen mesh onto vibrating screens.
Polyweb Urethane Fine Screens offer an extended wear life, given their flexible nature and polyurethane coating. Customers have reported between four and 10 times the life expectancy, dependent on product, regional conditions and finished product size. Not only does this extend the initial screen cost over a longer period, it also offers a substantial increase in production time available. Reducing the requirement to stop multiple times a year for change-overs has provided customers with increased capacity equating to $10,000 to $20,000 of increased finished product. This is without accounting for the labour and machine hire savings.
Comparing the price of the screens is important, as are the potential savings and increased production time available if you dont have to stop.
due to the smooth surface of the Polyweb Urethane Fine Screens. The unique design and construction of the Polyurethane screen also results in lower operating noise.
Specifications:
Material: polyurethane.
Aperture size: Width: 0.075mm - 1.5mm ,  Length: 2.59mm - 8.2mm.
Life: 6 month - 12 month.
Color: orange, red and as your requests.
Screen size : 700mm x 1040mm is common , other size can be design as your request.

We are supplier and exporter of Manganese Oxide.

Manganese Oxide Fertilizer Grade: Application: The product is generally used by the fertilizer industry. Fertilizer Grade: Appearance: Fine greenish-brown powder Total Manganese (Mn): 54% +/- 2% Manganese Oxide (MnO): 68% Iron as Fe: 12% max. Silica as SiO2: 12% max. Alumina as Al2O3: 5% max. Manganese Dioxide (MnO2): 2% max. Screen analysis 100 mesh (BSS): 95-100% Passing.

Manganese oxide Mn :- 44 - 46 % Mno2 :- 06 % max. Sio2 10 % max. Fe203 :- 08 % max. 50 kgs. Hdpe begs.

About THE Product :
Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement).
Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications.
Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties.
Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste.
Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water.
Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium.


GBFS : (Granulated Blast Furnace Slag)
Source : Granulated BF Slag From Gujarat State, India
Supply Quantity : 50,000 Metric Tons Per Month
Packing: Bulk

Parameters (% BY MASS)
CaO 30-38
Al2O3 15-20
SiO2 30-40
Glass Content 85-97
MgO 8-11
Fe2O3 0.5-1.5
Moisture 10 MAX
Size -5mm Min 95, +5 mm Max 5
Relative Gravity 2.9
Bulk Density(Bagged) 1200 KG/M3

Fruit Vegetable Peeling Machine, pineapple peeling machine ,and so on lots of kind fruit /vegetable peeling machine .
Watermelon peeling machine with half cutting function ,
Capacity 1-1.5T, bent straight, tall, thin, soft and hard can be peeled, with adjustable peeling thickness. The machine computer control has adaptive function (i.e. automatically adjust to low with height, fine with thickness, and straight with bending), and can be peeled with single or double knives. It is a key equipment for industrial processing of dried fruits and vegetables, slices, diced, strips, blocks, Rong, powder, preserved, and fresh cut. It is also compatible with 26 types of fruits and vegetables, including winter melon, watermelon, pineapple, papaya, grapefruit, and taro.
Operation: Click on the touch screen - Set parameters - Place the fruit into the fruit holder - The machine automatically completes picking, delivering, peeling, and separating the material. Peeling and separating
Processing capacity 500 pieces/hour
Peeling thickness 1.5-10mm
Adapt to fruit height of 80-400mm
Adapted fruit diameter 80-250mm
Power 1.5kw 220V/50Hz
Weight 300kg
Machine size 1.45 x 0.9 x1.7m

Aggregates are mixtures of sand, gravel, crushed rock or other bulk minerals used in construction, principally as a component of concrete, and in civil engineering. At CEMENTATION we supply aggregates for a range of core applications, from fill materials to aggregates that can be used in concrete, precast concrete, asphalt and for surface dressing. Aggregate plays an important role in concrete and construction part. We supply quality material which makes durable concrete with higher compressive strength and low permeability having better finish. We can supply a wide range of coarse, fine and blended aggregates in accordance with international standards.

We acquire rock mines and stone crushing plants and enable us to fulfil contract of any size. Progressive stages if crushing and screening enable us to produce a range of aggregate sizes (06mm to 65mm)

APPLICATIONS

Road and Highway surfaces
Constructions or Civil work
Railway Ballast
To make Concrete or Asphalt
Filling

Herb Grinder With Pollen Catcher & Brush

Herb Grinder with Pollen Catcher and Brush, Two Filtration Mesh Screens, Black 2 Chambers design, with a powerful neodymium magnets for lid closure keep herbs fresh & odorless, also it makes access quick and easy. 2.5" diameter x 2.2â?? height, features the large space container and impeccable body design will provide you with an opportunity to always know the quantity of herbs you're working with while keeping

them contained securely and firmly in place 54 razor sharp curved diamond teeth & 44 precisely sized hole to ensures a consistent, perfect grind. Gently dried herbs are sealed in to top chamber aroma and flavor, turn left and right 360 degree for twice. Ideal for grinding herbs and tea. Comes with two stainless steel mesh screens, and they can be used interchangeably to getting ULTRA FINE powders from ground herbs. With the little scraper and brush included, you can get your pollen out or the herb out which caught in between the teeth easily be.

Noted:- Don't touch the sharp teeth with your hands, and please put the kitchen herb grinder where the children can't reach it.

OEM : Yes

Origin : India

MOQ : 1 (40'ft HQ Container)

Metallurgical coke is a carbon material resulting from the manufactured purification of multifarious blends of Australian coal.LAMC is Green fuel and 100% Eco Freindly Fuel.
Coke is made by destructive distillation of a blend of selected Bituminous coals (called Coking coal or Metallurgical coal) in special high temperature ovens in the absence of oxygen until a greater part of the volatile matter is driven off. The resulting product, COKE, consists principally of Carbon with sizes ranging from basketballs (foundry coke) to fine powder (coke breeze).
Coke is primarily used to smelt iron ore and other bearing materials in blast furnaces, acting both as a source of heat and as a chemical reducing agent to produce pig iron or hot metal.
We currently operates non polluting non recovery type coke ovens . The raw material requirement is met by importing prime coking coal of Australian origin. The distinct features of our coke are as under:
Meticulous coking cycle and relatively higher oven temperatures results in superior coke quality.
Complete combustion of coking coals resulting in almost negligible levels of pollution.
Advance In-house lab for complete analysis and to rectify minute changes in chemical specifications.
We are planning to develop new trends as far as improved coke quality is concerned.
Completely RCC coal & coke yard which ensures that the coke quality is maintained.
Exclusive mechanized machines for exact sizing and screening of coke.
Excellent infrastructure facilities like steel duct & stack and big size ovens which increases the efficiency as well as the quality of coke.
We have expertise in producing different coke qualities for the requirements of blast furnaces, foundries, Ferro alloys.
We are also diversifying into different activities and moving towards an eco friendly energy by setting up a power plant with the stack emissions of our coke oven.
Low Ash Metallurgical Coke (Met Coke) is required for metallurgical and chemical industries and is used as the primary fuel where high temperature and uniform heating is required.
The industrial consumers of LAMC include integrated steel plants, industry/foundries producing Ferro Alloys, Pig Iron, Engineering Goods, Chemicals, Soda Ash,Cement Industries,Zinc units and also used in Tea and hotel restaurants & etc.