Our Solar Charge Controllers are into 2 models: MPPT AND PWM
Range: PWM (From 20A - 60A), MPPT (From 20A - 80A)
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS - Battery remote temperature sensor terminalEnable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS - Battery remote temperature sensor terminal Enable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
*Product Name: 5A Home Controller(New Style) *Rated Charging Current:5A *Rated Load Current:5A *System Voltage:12V/24V Automatic Identification *Undervoltage Voltage:12.0V; ×2/24V; *Over-discharge Protection Voltage:11V/ 22V *Over-dischargeRecovery Voltage:12.5V/25V *Over Voltage Protection:15.5V/31V *Charge Return Voltage:13.2v ×2/24V *Boost Voltage:14.6V×2/24V (Hold Time10min)(Call it when Only Appear Over-discharge) *Direct Charge Voltage:14.4V; ×2/24V (Hold Time10min) *Float Voltage:13.6V; ×2/24V(Hold TimeDropped to Charge Return Voltage) *Temperature Compensation: -5mv//2VPromote,Direct Charge,Floating Charge,Charging Return Voltage Compensation *No-load Loss:6 mA *Charge Loop Drop:Not More Than0.26V *Discharge Loop Drop:Not More Than 0.15V *Load Overload/Short Circuit Protection:Yes *Control Mode:Hand Switch *Work TemperatureTechnical grade-35 to +55
1. Built-in LED constant current source. 2. With intelligent four phases PWM digital dimming.(power is 100%,75%,50%,25%) 3. IP68 waterproof degree. 4. The max output voltage is 70V, which can drive 20 LED lamps installed in series 5. Various protections. Specification: System voltage: 12V/24V Auto Output current: 330mA ¨C 2310mA No-load loss: 5mA/12V;7mA/24V Solar input voltage: < 55V The Max. charging current: 8A Overvoltage protection: 17.0V; 2/24V Equal charging voltage: 14.6V; 2/24V(25), duration:1h Ascending charging voltage:14.4V; 2/24V(25), duration:2h Float charging voltage: 13.8V; 2/24V (25) Return voltage during charging:13.2V; 2/24V (25) Return voltage for over-discharging:12.5V; 2/24V Over-discharging voltage:11.1V; 2/24V Temperature compensation :-4.0mv//2V; Light-control voltage :Light-control open 5V; light-control close 6V Efficiency of constant current:90% - 96% Current accuracy:+/-2% Light-control judgment time :10min The Max. output voltage:70V Working temperature:-40 to +70; Protection level:IP68 Weight :160g Dimensions ; 825820(mm)(LWH). Package:1pc/box;54pcs/ctn Size: 280*280*220mm.
1. over-load protection 2.short circuit protection 3.reverse discharging protection 4.reverse-polarity protection 5.protection from the lightning strike. 6.under-voltage protection 7.over-charging protection 8.HVD setting when battery stopped working or charging. 9.LVD setting when load under voltage and stop working. 10. battery capacity display SOC 11. Renew setting of load-starting 12. intelligentize of temperature compensation 13.controller is always counting and saving the charging current hours and display on LCD screen. 14. controller is always counting and saving the discharging current hours and display on LCD screen.
The controller is designed for solar dc lighting system, there are several optional working modes, and has two output terminals, with separate time set. Specification: 12v, 12/24v, 5a, 10a, 15a Use mcu and professional software as the control center to fulfill intelligent soc control, protection to overload, outside and insdie short circuit, reverse connection, thunder and lightining, pv panel reverse current, over charge and discharing etc, usd pwm high efficiency charging way and temperature compensation. Industry level production standard, led indication on system condition. The controller pcb is pained with england apl lacquer, its highly moisture-proof As the same above
Solar charge controller Suunny solar charge controller is controlled by cpu, according to the voltage ofbattery, controller will adjust the charge current and decide if to supply the loads electricity. The following is the detailed performance: Generally keep the battery on full voltage condition. Prevent the battery from over-charging. Prevent the battery from over-discharging. Prevent supplying electricity from the battery to solar panels during nights. Reverse polarity protection for battery Reverse polarity protection for solar panels When the current of load exceeds the rated one of controller, the controller will turn into the self-protection state and is automatically locked up, the screen shows overload. Short circuit happens; the controller will turn into the self-protection state and is locked up, the screen show short circuit. Low voltage happens to battery, the controller will automatically separate loads from system. When the voltage of battery goes up, the loads will automatically restart to work. Protection from the lightning strike When controller is normally working, the lcd screen will show new charging current (a dash-before the numeral) , discharging current and voltage of battery every 5 seconds.
Model: mppt5012a-duo (12a) , mppt5025a-duo (25a) Solar charging controllers for camper Charge modemppt System voltage12v Battery numbertwo battery charging ports Battery typegel, lead-acid, agm2, lifepo4 Application 1.For camper, caravan 2.Self-contained solar systems 3.For boat 1. Increased mpp charging current compared with conventional controllers, due to ultramodern controller technology (microprocessor)by 10 % to 30 % (efficiency > 95 %) 2. Switchable characteristic lines of charging for optimum charging of gel/dry fit/agm/fleece or acid/lead-acid, as well aslifepo4 batteries . 3. Two battery charging ports: automatic charging of the main battery or board battery (board i): Support charging and trickle charging (max.1 a) of the vehicle's starter battery (start ii) with overcharge protection 4. Unattended charging: standard protection against overload, overheating, reverse battery and back discharge of the battery(in case of insufficient solar power, such as at twilight, at night etc.). 5. Overcharge protection: reduction of the charging current of the battery in case of excessive solar power and full battery. Immediate recharging in case of power consumption to ensure always the best possible charging state of the battery. 6. Connection for temperature sensor , automatic adaptation of the charging voltage to the battery temperature. Incase Of low outside temperatures, full charging of the weaker battery is improved, and in case of summery temperature sun necessary battery gassing will be avoided. This is highly recommended, if the battery is exposed to strong variations in temperature, such as in the motor compartment. -
Lifepo4 Solar Charge Controller,