Drying and Evaporation Plants
ITEM DESCRIPTION Substrate Size ~ 8inch Deposition Direction Upward Thermal Source ~ 10V, 300A Thickness Uniformity ± 3% Heating Uniformity ± 3% Full Automation Control.
The vacuum evaporator is made by Italian Ecoteck in year 2003 and operation was stopped in early 2009 and it is in very good operational condition. This unit is made for concentrate acidic liquid wastes and therefore all liquid touching parts are made of acid proof steel ( SS 2353) or PVC. The evaporation capacity of the unit is 5000 liters / day. The unit is a complete working unit and it includes evaporator, boiler, heat pump, centrifugal pump, water-air cooler, steam ejector, control unit and all other necessary equipment to complete the unit. Operation principle: Steam rises from the boiler through a drop dispenser to the cooling unit where it condensates. The condensate drops with the gravity down to vacuum system. In-build heat pump heats up the cooling media and simultaneously cools down the condensate. Water – air cooler cools down the extra heat from the process. Necessary vacuum is generated with a centrifugal pump and a steam ejector. Condensate rejection takes place in accordance with prescheduled frequency. Technical data: Manufacturer: ECOTECH Srl Italy / Vilokan Ren Miljöteknik Sweden Type: ECO 5000 VS-HP, R407C Year made: 2003 Evaporation capacity: 5000 liters / 24 hour (pure water) Electricity consump.: about 0,15 kWh / liter pure wateri) Control unit: Siemens Micromaster 420 Compressor: Bitzer Kuhlmachinenbau GmbH, Compressor type: 6G-40,2 Compressor capacity: 126.8 m3/h, 19/28 bar Refrigenerant: R 407 C Main dimensions: 2.8 m x 1.3 m x 2.9 m Weight: 1500 kg.
Rotary evaporator is mainly used in pharmaceutical, chemistry and bio-pharmaceuticals industries, for concentration, crystallization, drying, separation and solvent recovery. Especially suitable for the biological products concentration and purification which is easy to decompose deformation under high temperature. Popular used in plant oil industry, for ethanol / alcohol recovery, solvent remove, etc. TOPTION provide 1L 2L 3L 5L 10L 20L 30L 50L 100L wide capacity range rotary evaporator customize, OEM & ODM, factory directly sale with most competitive price, ISO CE certification, 1 year warranty period, wholehearted service during evaporator long service life.
Features 1, quick and easy lifting mechanism: Re201d, re301 and re501 rotary evaporators are water tank lifting. Turning the handwheel on the oil/water bath drives the bath to lift and go down. Re52 series is the motor thread lifting, that is, turning the handwheel on the screw stem will drive the rotating flask, rotating motor, condenser and collecting flask to lift or go down at the same time. 2, the evaporators can incline willfully along the horizontal direction within 0-45¡ã 3, high evaporation rate vertical condensation system The condenser adopts two structures. One is the dual pipeline convection principle and is used for evaporating organic solvents. The other is single pipe container with interlayer that could hold cooling water, ice and drikold. It is vertical type to decrease volume and is used for evaporating organic solvents. 4, heating tank Stainless steel heating tube provides heat source. The temperature range will be rt~99 ¡æ with water. The water tank is cylindrical and made of high quality stainless steel. So it is corrosion resistance and durable. The tanks are available for 2-20liter rotating flask heated. Moreover, the tank can be moved according the rotating flask size. 5, vacuum sealing Ptfe evaporating pipe, good sealing and heat-resisting. Joint part is sealed fluorine rubber mat which brings good performance. 6, automatic temperature control digital display Temperature digital display and control by pt100 sensor. When the pre-selected temperature is reached the temperature you setted, the controller automatically will turn off the heater supply, when it is lower than the pre-selected temperature, controller will switch on automatically to realize constant temperature. 7, rotating flask and collection flask The flasks are made of gg-17 high borosilicate glass which is blowed by hand. Their intensity, concentricity, glossiness, and surface finish are better than rough flasks. Wooden cases or as your requirement
VR stands for Mechanical Vapor Recompression and is an evaporator driven by mechanical energy or electricity. The process is actually an open heat pump process and therefor the drive energy demand is depends on delta T between condensing vapor and evaporating vapor. That is why MVR evaporator works with quite low energy demand as long as the boiling point rise is low.
Agitated Thin Film Evaporator is best suitable for heat sensitive product where product drying time and drying temperature are very critical and well acknowledged among the buyers for its qualitative features.
A Falling film evaporator is an industrial device to concentrate solutions, especially with heat sensitive components.
Tower tech global is dedicated to designing and manufacturing the highest quality products for the evaporative cooling.
