Rotary Evaporator

Features 1, quick and easy lifting mechanism: Re201d, re301 and re501 rotary evaporators are water tank lifting. Turning the handwheel on the oil/water bath drives the bath to lift and go down. Re52 series is the motor thread lifting, that is, turning the handwheel on the screw stem will drive the rotating flask, rotating motor, condenser and collecting flask to lift or go down at the same time. 2, the evaporators can incline willfully along the horizontal direction within 0-45¡ã 3, high evaporation rate vertical condensation system The condenser adopts two structures. One is the dual pipeline convection principle and is used for evaporating organic solvents. The other is single pipe container with interlayer that could hold cooling water, ice and drikold. It is vertical type to decrease volume and is used for evaporating organic solvents. 4, heating tank Stainless steel heating tube provides heat source. The temperature range will be rt~99 ¡æ with water. The water tank is cylindrical and made of high quality stainless steel. So it is corrosion resistance and durable. The tanks are available for 2-20liter rotating flask heated. Moreover, the tank can be moved according the rotating flask size. 5, vacuum sealing Ptfe evaporating pipe, good sealing and heat-resisting. Joint part is sealed fluorine rubber mat which brings good performance. 6, automatic temperature control digital display Temperature digital display and control by pt100 sensor. When the pre-selected temperature is reached the temperature you setted, the controller automatically will turn off the heater supply, when it is lower than the pre-selected temperature, controller will switch on automatically to realize constant temperature. 7, rotating flask and collection flask The flasks are made of gg-17 high borosilicate glass which is blowed by hand. Their intensity, concentricity, glossiness, and surface finish are better than rough flasks. Wooden cases or as your requirement

Array rotary evaporator is an innovative pre-processing equipment that can simultaneously concentrate and process multiple samples. It consists of multiple miniRotar rotary evaporator units, a vacuum system, and a solvent condensation recovery system. It can greatly improve the experiment while realizing multiple sample processing. Room space utilization.

RE-100L rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries. Its principle is: under vacuum condition, constant temperature heating makes the rotary bottle rotate at constant speed, and the material forms large area film on the bottle wall, so it can be evaporated efficiently. The solvent evaporation is cooled by the high-efficiency glass condenser and recovered in the collecting bottle, so as to greatly improve the evaporation efficiency. The utility model is especially suitable for concentrating and purifying biological articles with high temperature and easy decomposition and degeneration. Applications of the RE-100L Rotary evaporator RE-100L rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries.

Brief Introduction of the 10L Rotary evaporator: 10L Rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries. Its principle is: under vacuum condition, constant temperature heating makes the rotary bottle rotate at constant speed, and the material forms large area film on the bottle wall, so it can be evaporated efficiently. The solvent evaporation is cooled by the high-efficiency glass condenser and recovered in the collecting bottle, so as to greatly improve the evaporation efficiency. The utility model is especially suitable for concentrating and purifying biological articles with high temperature and easy decomposition and degeneration. Main Features of the 10L Rotary evaporator 1, The main body of the use of stainless steel + aluminum alloy, reasonable structure, materials stress. 2, Sealing system using PTFE and imported fluorine rubber combination seal, to maintain high vacuum. 3, Vacuum pressure gauge shows real-time vacuum, vacuum up to 0.098Mpa. 4, Glass parts are all high borosilicate glass (GG-17), high temperature, anti-corrosion. 5, Can be continuously fed to facilitate the use of customers, valve-type feeding tube sets of tetrafluoroethylene tube. 6, Vertical three-tier serpentine coil condenser, the main cold + pay cold double condenser, to ensure high recovery rate, additional tube. 7, Microcomputer ON-OFF power switch control. 8, Bath digital display, intelligent thermostat control, K-type sensor fast and accurate delivery temperature. 9, Frequency control (0-120rpm), speed digital display, knob set, easy to operate. 10, Fuse safety protection. 11, The pot is made of high quality stainless steel, durable and durable. 12, Bath handwheel lift. 13, Collection of bottles with a discharge material, easy to evaporate the collection of extracts, discharge. 14, Check valve control, continuous discharge.

Brief Introduction of the 1L rotary evaporator RE-52C rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries. Its principle is: under vacuum condition, constant temperature heating makes the rotary bottle rotate at constant speed, and the material forms large area film on the bottle wall, so it can be evaporated efficiently. The solvent evaporation is cooled by the high-efficiency glass condenser and recovered in the collecting bottle, so as to greatly improve the evaporation efficiency. The utility model is especially suitable for concentrating and purifying biological articles with high temperature and easy decomposition and degeneration. 1L rotary evaporator is an indispensable instrument for evaporation, concentration, crystallization, drying, separation and solvent recovery in the research and production of medicine, chemical and biological products. The rotary evaporator is developed under the condition of vacuum and negative pressure, using the principle of constant temperature heating and thin film evaporation. Rotary evaporator with stepless rotation of the glass bottle rotating at a constant speed, the material is formed large area uniform film on the bottle wall, then the intelligent thermostatic water bath for rotating the bottle uniformly heated at high speed under the condition of vacuum evaporation, solvent vapor by high performance glass condenser cooling, recycling in collecting bottle. Rotary evaporator is working under vacuum, and all material contact part adopts the high temperature resistant borosilicate glass and Teflon material, concentrated especially suitable for biological products of high temperature easy decomposition degeneration and purification. The factory set rotary evaporator essence of similar products at home and abroad, in successful practice, has formed 1L,2L, 5L, 10L, 20L, 30L,50L, 100L series, efficient and practical, follow the economic principles of product design, all for the sake of users. Main Features of the RE-52C rotary evaporator 1, the main stent adopts antiseptic spraying + aluminum alloy. The structure is reasonable and the materials are exquisite. 2, the sealing system adopts PTFE and imported fluorine rubber combination seal, can maintain high vacuum. 3, all glass parts using high borosilicate glass (GG-17), high temperature, corrosion protection.

The rotary evaporator or "rotovap" is an expensive piece of apparatus that needs to be used with great care. If you follow the instructions carefully, it is the fastest, most efficient and most environmentally friendly way of removing a volatile solvent from a non-volatile sample. It is standard equipment in a modern chemistry laboratory. The rotovap works by increasing the rate of evaporation of the solvent by: (1) reducing the pressure to lower the solvent boiling point, (2) rotating the sample to increase the effective surface area (3) heating the solution. Rotary evaporators are distillation units that incorporate an efficient condenser with a rotary flask system. As the flask containing the solvent is rotated it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation that is effected by heating from the accessory water or oil bath. They are the ideal tools for many everyday laboratory applications including: Concentration of solutions Reclamation of solvents Vacuum drying of wet solids Degassing liquids

10L Rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries. Main Features of the10L Automatic Lifting Rotary Evaporator: 1, The main body of the use of stainless steel + aluminum alloy, reasonable structure, materials stress. 2, Sealing system using PTFE and imported fluorine rubber combination seal, to maintain high vacuum. 3, Vacuum pressure gauge shows real-time vacuum, vacuum up to 0.098Mpa. 4, Glass parts are all high borosilicate glass (GG-17), high temperature, anti-corrosion. 5, Can be continuously fed to facilitate the use of customers, valve-type feeding tube sets of tetrafluoroethylene tube. 6, Vertical three-tier serpentine coil condenser, the main cold + pay cold double condenser, to ensure high recovery rate, additional tube. 7, Microcomputer ON-OFF power switch control. 8, Bath digital display, intelligent thermostat control, K-type sensor fast and accurate delivery temperature. 9, Frequency control (0-120rpm), speed digital display, knob set, easy to operate. 10, Fuse safety protection. 11, The pot is made of high quality stainless steel, durable and durable. 12, Bath handwheel lift. 13, Collection of bottles with a discharge material, easy to evaporate the collection of extracts, discharge. 14, Check valve control, continuous discharge.

1, the main bracket adopts stainless steel + aluminum alloy, the structure is reasonable, and the materials are exquisite. 2, the sealing system adopts PTFE and imported fluorine rubber combination seal, can maintain high vacuum. 3, the vacuum pressure gauge shows real-time vacuum, and the vacuum can reach 0.098Mpa. Brief Introduction of the 5L Rotary Evaporator 5L explosion-proof rotary evaporator (instrument) is our company in order to adapt to the modern pharmaceutical and chemical reaction test production needs, the RE series rotary evaporator (instrument) and a new generation of products based on the national key institutions joint development and production, the series of products using explosion-proof motor, explosion-proof explosion-proof inverter and intelligent temperature control box. PTFE sealing material, sealing, corrosion resistance, abrasion resistance, frequency conversion speed, smooth operation. RE-501 explosion proof rotary evaporator is an indispensable instrument for evaporation, concentration, crystallization, drying, separation and solvent recovery in the research and production of medicine, chemical and biological products. The rotary evaporator is developed under the condition of vacuum and negative pressure, using the principle of constant temperature heating and thin film evaporation. Rotary evaporator with stepless rotation of the glass bottle rotating at a constant speed, the material is formed large area uniform film on the bottle wall, then the intelligent thermostatic water bath for rotating the bottle uniformly heated at high speed under the condition of vacuum evaporation, solvent vapor by high performance glass condenser cooling, recycling in collecting bottle. Rotary evaporator is working under vacuum, and all material contact part adopts the high temperature resistant borosilicate glass and Teflon material, concentrated especially suitable for biological products of high temperature easy decomposition degeneration and purification.

Brief Introduction of the Automatic Lifting Rotary Evaporator 3L rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries Main Features of the 3L Automatic Lifting Rotary Evaporator 1, the main bracket adopts stainless steel + aluminum alloy, the structure is reasonable, and the materials are exquisite. 2, the sealing system adopts PTFE and imported fluorine rubber combination seal, can maintain high vacuum. 3, the vacuum pressure gauge shows real-time vacuum, and the vacuum can reach 0.098Mpa. 4, all glass parts using high borosilicate glass (GG-17), high temperature, corrosion protection. 5, continuous feeding is convenient for customers to use, the valve type feeding pipe is sheathed with tetrafluoroethylene tube. 6, vertical double coil coil condenser, ensure high recovery, additional tubes. 7 ã?? microcomputer ON-OFF power switch control. 8, bath pot digital display, intelligent constant temperature control, K type sensor fast and accurate delivery temperature. 9, electronic stepless speed regulation (0-120rpm), speed digital display, rotation and torsion settings, easy to operate. 10 fuse safety protection. 11, the pot adopts high quality stainless steel, corrosion resistant and durable.