Disassembling and assembling is easy
Can fit into smaller spaces when disassembled
Equipped with wheels on the mast also allow it to be user as a trolley;
Light alumium mast, easy for handling.
No any hydraulic problem, because it's operated by winch.
The best brake function with special design is obvious.
Technical data :
1kg=2.2lb 1inch=25.4mm
Item/type:
Wfh-181, Sw-181, Wfh-227, Sw-227
Capacity q Kg:
181, 181, 227, 227
Load center Mm:
305, 305, 305, 305
Max.Fork height Mm:
2500, 1700, 1250, 1250
Min.Fork height Mm:
90, 50, 90, 50
Fork length Mm:
570, 570, 570, 750
Fork width Mm:
630, 1100, 630, 1100
Net weight Kg:
60, 66, 51.
Fork length570.
Fork width1100.
Net weight66kg.
Smooth travel and lift combine excellent controls to reduces product damages and increases productivity.
Lift limit switch operates at maximum lift height to shut off pump motor.
A heavy-duty 24-volt electrical system provides good travel and lift speeds.
High quality hydraulic pump assures very little noise, maximum efficiency and durability.
Drive units is equipped with an electromagnetic brake that is spring applied and electrically released.
The brake is activated by the control handle position.
The handle is ergonomically designed with a raise, lower and horn button.
Speed automatically reduces when driving with the forks at a height of 12" or higher.
Small turn radius makes it suitable for narrow passage ways.
The CURTIS electronic controller helps provide plenty of low end torgue while in creasing the motor and battery life.
Foot pedal reduces fatigue.
Built-in charger. Technical data
Residual Capacity at different lifting height.
1KG=2.2LB 1INCH=25.4MM
Up to h3 mm
ACTUAL CAPACITY (Q) kg
2500, 1500, 1000
2900, 1000, 700
3400, 800, 500
Load center distance (C)mm
600, 700
With CURTIS electric control from Germany
Equipped with METRLROTA driving wheel and HPI pump unit from Europe.
Heavy duty design with top quality mast construction of HOSCH steel from Germany.
Identification 1.2 Manufacturer's type designation FL1529 FL1534
1.3 Drive:electric(battery or mains), diesel, petrol, fuel gas, manual electric
1.4 Type of operation:hand,pedestrian,stand ing,seated, order-picker Pedestrian
1.5 Load Capacity /rated load Q (t) 1.5
1.6 Load center distance C mm
600
1.8 Load distance, center of drive axle to fork X mm 677
1.9 Wheelbase y mm 1183 1168
Weights 2.1 service Weight Kg 1020 1120
2.2 Axle loading, laden front/rear Kg 1195/1325 1245/1375
2.3 Axle loadings, unladen front/rear Kg 755/265 826/295
Wheels Chassis 3.1 Tyres: solid rubber, superelastic, pneumatic, polyurethane) polyurethane
3.2 Tyre size, front 250x78
3.3 Tyre size, rear 80x70 1)
3.4 Additional wheels(dimensions) 150x54
3.5 Wheels, number front/rear(x=driven wheels) 1x+2/4
3.6 Track width,front b10(mm) 685
3.7 Track width,rear b11(mm) 390/515
Basic Dimensions 4.2 Lowered mast height h1(mm) 2005 2235
4.3 Free lift h2(mm) 144 -
4.4 Lift height h3(mm) 2814 3314
4.5 Extended mast height h4(mm) 3430 3905
4.9 Height of tiller in drive position min./max. h14(mm)
985/1365
4.15 Lowered height h13(mm) 86
4.19 Overall length l1(mm) 1940 1925
4.20 Length to face of forks l2(mm) 790 775
4.21 Overall width b1(mm) 805
4.22 Fork dimensions s/e/l(mm) 60/180/1150
4.25 Width over forks b5(mm) 570/695
4.32 Ground clearance, center of wheelbase m2(mm) 50
4.33 Aisle width for pallets 1000x1200 crossways Ast(mm) 2162 2147
4.34 Aisle width for pallets 800x1200 lengthways Ast(mm) 2136 2123
4.35 Turning radius Wa(mm) 1480 1465
Performance Data 5.1 Travel Speed, laden/unladen km/h 5.1/5.4
5.2 Lift speed, laden/unladen mm/s 105/170
5.3 Lowering speed, laden/unladen mm/s 100/95
5.8 Max.gradient performance, laden/unladen % 6/12
5.10 Service brake Electromagnetic
E-Motor 6.1 Drive motor rating s2 60min kw 1.2
6.2 Lift motor rating at s3 15% kw 3.0
6.3 Battery acc. To DIN, no 3PZS
6.4 Battery voltage, norminal capacity V/Ah 24/210
Others 8.1 Type of drive control MOSFET Control
8.4 Sound level at driver's ear acc.to EN12053 dB(A) 67
1)Single wheel 80x93
.2 Lowered mast height h1(mm) 2005 2235
4.3 Free lift h2(mm) 144 -
4.4 Lift height h3(mm) 2814 3314
4.5 Extended mast height h4(mm) 3430 3905
4.9 Height of tiller in drive position min./max. h14(mm)
985/1365
4.15 Lowered height h13(mm) 86
4.19 Overall length l1(mm) 1940 1925
4.20 Length to face of forks l2(mm) 790 775
4.21 Overall width b1(mm) 805
4.22 Fork dimensions s/e/l(mm) 60/180/1150
4.25 Width over forks b5(mm) 570/695
4.32 Ground clearance, center of wheelbase m2(mm) 50
4.33 Aisle width for pallets 1000x1200 crossways Ast(mm) 2162 2147
4.34 Aisle width for pallets 800x1200 lengthways Ast(mm) 2136 2123
4.35 Turning radius Wa(mm) 1480 1465.
Technical data :
1KG=2.2LB 1INCH=25.4MM
Model No.
SEN1520, SEN1525, SEN1530, SEN1535, SEN2020
Rated Capacity kg
1500, 2000
Load Center mm
400
Max. Fork Height
2000, 2500, 3000, 3500, 2000
Max. Machine Height
2560, 3060, 3560, 4060, 2560,
Fork Length
1000
Fork Width
300-850
Min. Turning Radius
1350, 1450, 1350
Wheel Base
1185
Front-Wheel Distance
316
Lifting Motor
v/kw
12/1.5-1.6
Aneroid Battery
v/Ah
12/120-150
Charger
v/A
12/15
Overall Length mm
1660
Overall Width
865, 930
Overall Height
1580, 1830, 2080, 2330, 1580
Overall Net Weight kg
448, 470, 492, 515.
Italian SME full-AC controllers, Full-AC import drive unit, Import multifuntion LCD instrument, High-capacity battery.
Technical data:
1KG=2.2LB 1INCH=25.4MM
Characteristics Model CPDS15 CPDS18
Rated capacity kg: 1500 1750
Load center mm 500
Power type Battery
Tyres Super elastic
No.of tyres (front/rear) 2/2
Dimensions Lift height mm 3000 3000
Free lift height mm 130 130
Fork size mm 35¡Á100¡Á920 35¡Á120¡Á920
Upright tilt(forward/backward) deg 5/7
Overall Length to fork face mm 2780 2830
dimensions Length to fork face (withoutfork) mm 1860 1910
Wheel width mm 1050
Overall width mm 1070
Height,mast lowered mm 1980
Height,mast extended mm 3945
Height,overhead guard mm 1990
Turning radius(outside) mm 1500
Front overhang mm 360
Right-angle store aisle(pallet800¡Á1200,1000¡Á1200) mm 2860/3060 2910/3110
Performance Travel speed(with/without load) km/h 13.2/14.3 12.8/14
Lifting speed(with/without load) mm/sec 300/470
Lowering speed(with load) mm/sec 450
Max.pulling force KN 14.84 13.08
Grade ability(with load) % 20 19
Weight Service mass(including battery) kg 3100 3260
Load per axle Full load (front/rear) kg 4020/560 4300/640
Without load (front/rear) kg 1540/1540 1480/1740
Chassis Tyres size Front 18¡Á7-8 PR
Rear 16¡Á6-8 PR
Wheel base mm 1295
Wheel tread Front mm 895
Rear mm 205
Ground clearance £¨full load/without load) Mast mm 80/85 75/85
Frame mm 100/110
Service brake Hydraulic
Power unit Battery Electric motor Ironclad plates
Voltage/capacity V/Ah: 48/505
Mass kg: 850
Electric motor Traction power kw: 5.5¡Á2
Lift power kw 8:
Streamlined exterior design, Buffer device for transverse steering axle, Overhead dual air filters, Integral hood, effectual in heat insulation and noise reduction.
Technical data :
1KG=2.2LB 1INCH=25.4MM
Diesel forklift
Specification(CPCD40-100)
1 Forklift type : Diesel forklift truck
2 Model : CPCD40 CPCD45 CPCD50 CPCD60 CPCD70 CPCD80 CPCD100
3 Power type : Diesel
4 Rated capacity : kg 4000 4500 5000 6000 7000 8000 10000
5 Load center : mm 500 600 600
6 Lift height : mm 3000~6500
7 Free lift height E mm 150 195 200
8 Fork size : mm 1070¡Á140¡Á50 1220, ¡Á150, ¡Á60 1220, ¡Á150, ¡Á65 1500, ¡Á160, ¡Á75 1500, ¡Á160, ¡Á80
9 Fork spread outside : 300/1200 300/1200 320/2015 420/2144
10 Mast tilt angle(forward/backward) ¡£ 6\12 6\12 6\12
11 Front overhang A2 mm 562 622 700 733
12 Overall dimensions length to face of fork A1 mm 3091 3091 3125 3592 3940 4258
13 Length with fork mm 4182 4182 4216 :
14 Overall width B1 mm 1485 1995 2245 2245
15 Mast lowered height H1 mm 2380 2500 2695 2845
16 Mast extended height H3 mm 4250 4419 4374 4297
17 Overtead guard height H2 mm 2290 2420 2565 2565
18 Min.turning radius R mm 2790 2790 2830 3450 3700 3900
19 Min.right angle aisle width X mm 3415 3415 3460 3090 3310 3540
20 Travel speed(No load/full load) Forward¢ñ km/h 15/14 28/26 28/24 28/22 28/24
21 Forward¢ò 22/20
22 Backward¢ò 15/14
23 Lifting speed(no load/full load) mm
/sec 480/450 480/450 480/430 500/330 450/320 480/350 390/280
24 Max.grade ability(no load/full load) ¡£ 20/19 18/17 17/19 20 20 20
25 Max.grawbar pull KN 21 :
26 Self weight : kg 6450 6770 7050 8840 9350 11080 12860
27 Tyres Front : 3.00-15-18PR 8.25-15-14PR 9.00-20-14PR
28 Rear : 7.00-12-12PR 8.25-15-14PR 9.00-20-14PR
29 Tread Front B2 mm 1180 1470 1600
30 Rear B3 mm 1190 1700 1700
31 Wheelbase A3 mm 2000 2250 2500 2800
32 Ground clearance
(No load/full load) Mast M mm 145/175 200 205/245
Frame F mm 180/195 323/343
33 Battery : V/AH 2-12V/80AH 2*12/100 2*12/100
34 Engine Model : Chinese Engine/ISUZU
35 Rated output kw
/rpm 68/2000 59/2300 82.4/2000
36 Rated torque N.M
/rpm 340/1400~1600
/280/1600~1800 353/1650 415/1400-1600
37 No.of cylinder : 6\4 6\6 6
38 Bore x stroke mm 105*125/105*120 102*118/105*125 102*118 105*125
39 Displacement L 6494/4156 5.785/6.494 5.785 6.494
40 Fuel tank capacity L 90 140 140
41 Transimis sions Type : Hydraulic Hydraulic Hydraulic
42 Shift Front/rear : 2\1 2\2 2\2.
