Drill machine is equipped with 4 drilling heads. Drill holder is capable of drill from 3 mm. To 14 mm. Machine is equipped with duel speed motor to obtain fine results on different kinds of paper and is fitted with automatic table lift system. Drill machine is made of rigid steel to avoid any friction.
Specifications:
Required space L x w x h 2050 x 2300 x 2500mm
Working height 950 mm
Drill bit speed 1400 mm
Stroke speed 11 or 22 strokes/min.
Power supply
Voltage 400 v
Phase 3 ph
Frequency 50 hz
Connection in value 1.7 kw
3 knife trimmer
Trimmer has been specially designed for the trimming of both hard and soft cover books. Trimmer is available in auto fed versions.
In trimming station, the product registered from the spine are precisely positioned and are pressed prior to being trimmed.
Special features easy access into the machine from all sides.
Heavy and compact construction for high-quality trimming. Optimized cutting force and pressing capacity.
Size change without exchange of parts. Safe and simple knife exchange. The trimming process
The cutting knives fall at a 20 degree angle for precise and clean cuts that leaves no rough edges. Pressure from a range of 150 kg to 2000 kg applied for perfect clamping. Paper trimming are blown away by compressed air.
The conveyor system
The delivery belt deliver the finished booklets to the conveyor belt, keeping them in neat, aligned piles. Book-block feeder one or more book-block of up to 8 cm. In total height can be fed into the machine at one time by auto feeder. The delivery belt lifts up to carry away the finished job to the delivery belt.
High efficiency gathering solution
Available in 2 different sizes, the glory gathers signatures from 35 gsm onwards. Machine can run up to 6, 000 bound books per hour with a facility of online wire stitching and rejection of bad copies. Configuration from 6 to 30 stations are possible with customisation for particular applications.
Double head wire stitcher
Finished book zig-zag delivery
Formats Model t 310 mm x 280 mm.,
Model f 406 mm x 280 mm.
Speed 6000 c.P.H.
Paper type 35 gsm to 100 gsm
8 pages to 32 pages signatures.
Block thickness Pressed - 55 mm
Unpressed - 70 mm
Power required 440 volts, 3 phase, 50 hz
Wire stitching device (optional) Twin head for lateral wire stitching
Maximum thickness for stitch 25 mm.
Distance between staple Max. 370 / min.100 mm
Staple crown Size - 12 mm
Stitching wire size 21 to 26 no. Wire
Minimum format for wire stitching 180 mm x 130 mm
Double head stitcher:
The gathering and wire-stitching machine serves for the economical production of saddle-stitched brochures like magazines, TV guides, timetables catalogues, lists and similar printed matter.
FUNCTIONAL GROUPS:
The gathering and wire-stitching machine comprises the following functional groups:
Stitching machine with two stitching heads or handling two staple sizes
Counter for continuous counting of the stitched brochures
Belt delivery for delivering the finished brochures in imbricated form
Sheet-gathering chain with 2-6 feeding stations (optional)
Drive for the connection with automatic feeders (special attachment-optional)
Operation of the gathering and Wire-stitching machine,
Model PEW DH2
Signatures and cover sheets are dropped on a circulating gathering chain and conveyed to the stitching station through the spine from the outside to the inside with the wire staples. The two stitching heads for stitching with two staples are arranged under a hinged guard. These can be easily set to the thickness of the material to be stitched and to changes of the distance between the staples. Two exchangeable stapling devices are supplied, one of them for thin and the other one for thicker wire-gauge. After the stitching operation, which can be performed with staggered or unstaggered position of the staples, the brochures are delivered in imbricated form on a belt delivery.
Higher efficiency Auto-feeders
Full utilization of the capacity of the gathering and wire-stitching machine DH2 can be achieved by connecting it with feeders operating according to the ôroll-offö principle. The gathering and wire-stitching Model DH2 can be provided upto 4 Auto-feeders.
If the machine is to be used for hand feeding, the feeders have simply to be swivelled back. These feeders are also suitable for polygraph flow lines and can be attached without any modification.
Technical Data
Sizes (untrimmed)
maximum with non-staggered stitching 350x280 mm
maximum with staggered stitching 330x280 mm
Minimum 150x100 mm
Stapling devices
A stitching thickness 0-4 mm, back length 16 mm, leg length 7 mm, for wire nos. 21-24
B stitching thickness 0-2 mm, back length 12 mm, leg length 5 mm for wire nos. 23-26 Distance between staple centres: maximum 220 mmminimum 55 mm
Drive
1 kW 3-phase squirrel cage motor 400/440V, 50Hz, 1500 rpm
Flowline
Stitcher
The saddle stitcher SS6 Stitch Star, designed to meet the needs of modern bindery which performs with an automatic stitching line with 10 feeders and online three knife trimmer.
Simple maintenance and quick make-ready of stitching heads, assured reliable and efficient production.
Simple timing of gathering chain to the stitcher.
Bearing supporting the gripper bar provides precise book transfer and extends gripper bar life.
Maintenance-free steel capped gathering chain and chain rails
Signature Feeders
The feeders are designed on the basis of signature æPeel offÆ system. Alloy rollers persistently peel each signature from the pile. Each of the three rotating vacuum shafts separates the signature without friction from the pile and lays on the onveyor chain.
Signatures with and without overfold can be handled.
No platform required for the loading of pile.
Stitching Thickness: With basic equipment max. 5 mm
Trimming Thickness max. 12 mm
Staple Centre Spacings With 6 stitching heads min. 65 mm...max. 450mm
Stitching heads max. 6
Handles Wire Grades No. 21-28
