Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter
SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly.
Features:
Web, SNMP, Console management
Hot-swappable module
Available with ST, SC, or WDM Simplex SC single-fiber connectors
Auto MDI/MDI-X on copper port
Auto-negotiation on copper port
LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision
Link-Fault Signaling illuminates to indicate link failure
Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link
Local and remote loopback
Features:
Automatic selection of optimal fusion splice program
Automatic detection of fiber end face
Automatic calibration of arc discharge
Automatic fiber alignment function
Automatic calculation of splice loss
5-inch color LCD monitor with clear digital image display
Dual mode of view, separately view of X/Y axis, simultaneous view of X and Y axis
Wind resistance function
Intuitive operating interface and menu design
Built-in battery
Compact size and light weight
Specifications:
Parameters Specifications
Applicable Fibers SM, MM, DS, NZDS
Fiber Cleaved Length (mm) 12 ~ 16 (Coating Dia.: 250um)
16 (Coating Dia. 250 ~ 1000um)
Fiber Diameter (um) Cladding diameter: 80 ~ 150
Coating diameter:100 ~ 1000
Fiber Count Single
Fiber Aligning Method Core aligning
Return Loss (dB) >60
Actual Average Splice Loss (dB) 0.02(SM), 0.01(MM), 0.04(DS), 0.04(NZDS)
Splice Mode Auto & Manual
Typical Splice Time (sec) 9 seconds with standard SM fiber
Fusion Splice Program 12 (templet), 188 (user)
Tube Typical Fusion Time 30 sec
Protection Sleeve Length (mm) 60, 40, 20
Storage of Splice Result 5000 results, 3 parameters per result
Tension Test (N) 2N
Fiber Magnification 400X (X or Y view), 200X (X and Y view)
Electrode Life 2500 times
No. of Splice/Heating with Battery Typical 130 cycles with built-in Li-battery
Monitor Reversible The fiber image can be turned over
Display Screen 5 inch color LCD monitor
Terminal RS232
Power Supply AC 100-240V with AC adapter inner Li-battery (6600mAH)
Operating Condition -10 ~ +50ó¬C; 0~95%RH (no condensation); 0-5000m above sea level; Max wind velocity of 15m/s
Dimensions (mm) 150(L) x 150(W) x 160(H)
Weight 3.52Kg including battery
SUN Telecoms SUN-OT5000 Handheld OTDR Series is more compact and user-friendly. The hotkey feature enables convenient events review and analysis. SUN-OT5000 Handheld OTDR Series supports averaging and real-time test on single-mode (1310/1490/1550/1625nm) and multimode (850/1300 nm) fibers and complies with various connector types. With í¦TraceManagerí¦ software, you can download trace files from OTDR to PC for further analysis, reporting and printing.
Features:
SM/MM models available
Dynamic range selectable: up to 45dB
Model SUN-OT5000-1625S3: 1625nm wavelength for PON system
Quick startup: < 5 seconds
Hotkey feature: easy operation, events review and analysis
High precision measurement, large internal memory
TraceManager software: easy batch editing and single-page multi-trace printing
Visible fault locator: fast locating failures anywhere in the network
Enhanced power performance: up to 8 hours continuous operation with one charge
Handy and smart: only 1kg (2.2 lbs)
Safe and rugged: 2-meter drop test passed
Multilanguage
The coloring fibers are positioned in a central loose tube. The PSP is longitudinal covering. Parallel steel wire is inside the PE sheath. Between steel strip and loose tube is filled with a water-blocking compound.
Characteristics:
Good mechanical and temperature
resistant performance.
Crush resistance, water blocking and flexibility
Geometrical Characteristics:
Number of Fibers 2-12
Cable Diameter (mm) 9.8
Cable Weight (kg/km) 110
Mechanical Characteristics:
Max Load (N) Long Term 600
Short Term 1500
Crush Resistance (N/100mm) Long Term 300
Short Term 1000
Bending Radius (MM) Dynamic 100
Static 200
Fiber Cladding:
Fiber Type (core/cladding dimension) 8.3/125, 50/125, 62.5/125
Transmission Characteristics:
SMF 50/125 62.5/125
1310/1550(nm) 850/1300(nm) 850/1300(nm)
Max. Attenuation (dB/km) 0.45/0.30 3.5/1.5 3.5/1.5
AVG. Attenuation (dB/km) 0.40/0.25 3.0/1.0 3.0/1.0
Min. Bandwidth (MHz/km) 400/400 160/500
Environmental Characteristics:
Storage/Operating Temperature -40íµí½+70íµ
SUNTelecoms SFP Transceiver supports dual data-rate of 1.25Gbps/1.0625Gbps and transmission distance of 80km with SMF (Single-mode Fiber). The SFP Transceiver consist of two sections: The transmitter section incorporates a FP laser, while the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA).
Features:
Hot-pluggable
Compact size, enabling high port density in each hosting device.
High-performance and cost-effective
SFP package with LC connector
1310nm FP laser and PIN photo detector
80Km transmission with Single-mode fiber
+3.3V single power supply and TTL logic interface
LVPECL compatible data input/output interface
Low EMI and excellent ESD protection
Eye safety, laser Class I safety standard, IEC-60825 compliant
Compatible with RoHS
