The 'db251d' glass straight-line beveling machine models have been designed and built to accurately grind and polish a bevel to the face of flat glass sheets and also smooth grind (pencil edge+) the remaining glass sheet edge. The beveling, polishing and edging functions are all be processed at one time.
The five grinding and smoothing spindles are accurately adjusted as a group allowing fast and accurate changes in required bevel width. The two felt polishing wheels are positioned by manual. The edging diamond wheel is adjusted manually. The whole machines bed is adjusted electrically for angle changes, via a robust gear drive system.
Technical data
Min. Process size:120mm*120mm
Max. Arris angle: 3p-30
Max. Bevel width:30mm
Glass process thickness: 4mm-19mm
Process speed: 0.73-3.65m/min
Spindles: 8
Power·ª16.8kw
Overall dimension: 7700*1300*2520(mm)
Weight: 4050kgs
This robust machine is designed to provide a ground and polished finish to the flat edge on flat glass up to 28mm thickness. The 9 spindle ôDE342Aö is the ideal machine for flat polishing all glass types, which can flat grind and polish flat edges together with ground and polished 45¦ arrises.
Operate and maintain.
Production speed is controlled via a motorvariator from 1.0 to 5.0 meters/minute.
Glass thickness is selected through a toggle switch linked to a servomotor and a digital display
The arris wheels automatically adjust with each thickness selected.
Each spindle has an associated ammeter enabling the operator to precisely regulate the degree of contact with the glass.
The entry and exit conveyors are toothed belts and the entry conveyor is equipped with a precise and easy-to-use gear reduction box that enables the operator to lower or raise the height of the inlet conveyor belt. This is especially beneficial when controlling the amount of glass removal without having to adjust each spindle individually.
The main conveyor is very robust with rubber covered nylon conveyor pads. The lubrication system is manual.
All motors are supplied according to clientÆs request, transformers are not used.
Technical data
Min. Process size:120mm*120mm
Max. Arris angle:45¦
Glass process thickness:3mm-28mm
Process speed:1.0-5.0m/min
Spindles:9
Power18.5kw
Overall dimension:6900*1200*2520(mm)
Weight:2750kgs
Des20 double edger is applicable for grinding straight edge of flat glass of different size and thickness. It can bevel the arris of the straight edge to angle of 45íp and it also can grind the four angles. The rough grinding, fine grinding , polishing for flat edge and arris beveling can be finished at one traveling. Continuous processing can be taken for glass of the same thickness. The shininess of the glass edge surface after being processed will be almost the same as the glass flat surface.
1.2 operation condition
1.2.1 power supply: ac380v+/-10% three phase 50hz+/-2%
1.2.2 ambient temperature: 1íµ~40íµ
1.2.3 r.H: <90%
2. Technical data:
(1)Thickness range for glass to be processed: 3~25mm
(2) Beveling angle: 45íp
(3) Min. Size for glass to be processed: 300mm
Max. Size for glass to be processed: 4000mm
(4) Processing speed: 0.6~6m/min
(5) Installed power: 48.6kw
(6) Required area of the machine: 9000*7000*1900
Ds1d shape edging/beveling machine applies to grinding and polishing for shaping peripheral and beveling edges of circular, ellipse and irregular flat glass, and also applies to semi-automatic grinding for circular and elliptical glass. Using different shaping grinding wheels can obtain the half- round, flat or og edges of glass. The grinding and polishing for bevel edges can be done by the means of adjusting angles of the grinding spindle and using the bowl-shaped grinding wheel
Technical data.
Working dimension:100mm-2100mm
Bevel angle: 0-20
Max bevel width: 40mm
Table rotating speed: 0.28-3.0 rpm
Spindles: 1
Power:2.85kw
Overall dimension: 1300*1100*1700(mm)
Weight: 880kgs
Glass table drilling machine (two drilling head) is suitable for drilling hole for different glass thickness and drilling different diameter hole by equipping different drilling bits. The machine is good for batch processing. Working efficient is high.
Technical data:
Distance between drilling head and supporting column:1345mm
Hole diameter:í=4mm-200mm
Glass process thickness:3mm-19mm
Power:4kw
Dimention:2500*2200*1600mm
