SINOFLOC anion polyacrylamide flocculant are co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negative charges, and thus anionic active character, in aqueous solution. We can offer two types of products of polymer flocculant powder and anionic polyacrylamide emulsion.
anionic polymer flocculant polyacrylamide msds above is only a brief indtroduction. For more details, please contact us.For more details about anionic polyacrylamide powder, please contact us.
Anion Polyacrylamide Feeding:
The solutions of SINOFLOC flocculant polyacrylamide must be prepared in suitable plants equipped with dry powder feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10�°C and 40�°C; For a correct use of SINOFLOC anionic polyacrylamide polymer and in order to achieve the best possible results, it is necessary to allow a "maturation" time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thor ough and homogeneous mixing without impairing the flock formation. Recommend operating concentration of anionic polyacrylamide copolymer is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on anionic polymer, please consult with SINOFLOC team.
There are many polyacrylamide anionic polyacrylamide distributors , but we are one of the best choices for you.
If you are looking for a reliable anionic polyacrylamide manufacturer , please contact us.
For more information about anionic polymer, please feel free to contact us!
SINOFLOC cationic flocculants are co-polymers of acrylamide with increasing proportions of cationic monomers. The cationic groups, which are thus introduced into the polymer, have positive charges in aqueous solution. Our cationic polyacrylamide powder is available in solid powder and emulsion forms.
Products Feeding:
The polyacrylamide is a synthetic cationic polymerization flocculants and polymer flocculant powder. It is mainly related to chain length and the charge of the dewatering performance of polyacrylamide excessive dosage. The positive charge on the ion polyacrylamide adsorption, due to electrostatic repulsion, it will reduce the sludge settling performance. Therefore, we should pay attention to investment in overtime to calculate in advance the proper dosage. The solutions of SINOFLOC cationic polyacrylamide for chemical applications must be prepared in suitable plants equipped with dry powders feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10�°C and 40�°C; For a correct use of SINOFLOC polymer cationic polyacrylamide powder and in order to achieve the best possible results, it is necessary to allow a â??maturationâ?? time of 60 minutes for the coagulation of water. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific polyacrylamide applications on cationic polymer, please consult with SINOFLOC team.
SINOFLOC supplies our customers a wide range of product portfolio in the oilfield industry. In addition to our standard oilfield chemicals, we are also supplying customized products to our clients in the different condition of high TDS and API brine, as well as in specific particle size.
With the team powered by dedicated and compassionate staff, we could assist you selecting the most suitable polymer for all you diversified process.
Sinofloc oilfield chemicals in the oil industry are:
Drilling Fluid Additives
Friction Reducer
Enhanced Oil Recovery (EOR)
Guar alternative
APPLICATION AREAS OF OUR OILFIELD CHEMICALS
DRILLING:
SINOFLOC developed a full range of water-based polymers used in drilling mud systems. Our polymers could match your requirements for drilling fluid in fluid loss control, viscosity and scale inhibitions. Oilfield chemicals from SINOFLOC are in a variety of forms, molecular weights and specific compositions for your need. SINOFLOC series products include:
Viscosifier
Shale Stabilizer (Clay Stabilizer)
Fluid Loss Control Additives
Scale Inhibitors
By using SINOFLOC products, the drilling bit is easily cleaned and the friction between drilling string and drilling hole is reduced.
SINOFLOC red mud washer flocculants is used for settling aluminum red mud slurries in alumina plants, which provide high settling rates, better separation performance and reducing suspended solids significantly. SINOFLOC products could improve the liquor filtration operations and make the processing more economical.
SINOFLOC DT 9619 is with very high molecular weight, powder based, to be used in alumina plants to settle red mud slurries of extraction of aluminium or alumina refinery . It contains anionic polyacrylamide functional groups with high anionic charge.
SINOFLOC DT 991 is with high molecular weight, emulsion based, to be used in used to settle mud in the red mud washing circuit of refining aluminium. These products are a combination of acrylamide and acrylate with very high anionic charge.
Application Area:
SINOFLOC products could be used in alumina bayer process. Red mud settling requires using the efficient flocculant for alumina processing to bridge and entrap the find red mud solids to separate the solids from liquor rapidly. The more efficient of our flocculants in this process, the lower the cost of red mud separation. SINOFLOC red mud flocculants provides a unique advantage for alumina refinery industry refiners to address productivity improvement and total cost of operation of extraction of aluminium oxide.
For more information about superabsorbent polymer, please feel free to contact us!
SINOFLOC red mud settling flocculants is used for settling aluminum red mud slurries in alumina plants, which provide high settling rates, better separation performance and reducing suspended solids significantly. SINOFLOC products could improve the liquor filtration operations and make the processing more economical.
SINOFLOC DT 9619 is with very high molecular weight, powder based, to be used in alumina plants to settle red mud slurries of extraction of aluminium or alumina refinery . It contains anionic polyacrylamide functional groups with high anionic charge.
SINOFLOC DT 991 is with high molecular weight, emulsion based, to be used in used to settle mud in the red mud washing circuit of refining aluminium. These products are a combination of acrylamide and acrylate with very high anionic charge.
Application Area:
SINOFLOC products could be used in alumina bayer process. Red mud settling requires using the efficient flocculants to bridge and entrap the find red mud solids to separate the solids from liquor rapidly. The more efficient of our flocculants in this process, the lower the cost of red mud separation. SINOFLOC red mud flocculants provides a unique advantage for alumina refinery industry refiners to address productivity improvement and total cost of operation of extraction of aluminium oxide.
For more information about anionic polymer, please feel free to contact us!
SINOFLOC superabsorbent polymers (known as SAP) are water-insoluble polymer, cross-linked copolymer of acrylic acid. It is in the form of white, odourless granules. This water-absorbing polymer is produced by acrylic acid and a cross-liner solution through polymerization. This product has the character of superabsorbent which makes this material could absorb and retain water of hundreds of times of its weight shortly. Moreover, this product is able to hold absorbed water even against pressure.
The characters make superabsorbent polymers (SAP) widely used in following fields:
Baby Diaper and Adult Diaper
Sanitary Napkin
Nursing Pad
Water Retaining Agent for Agriculture
Cable and Expanding Rubber
Plugging Agent
Concrete Curing
As one of the leading water absorbent polymer suppliers in China, SINOFLOC product has been widely used as aqueous absorbent for diapers, adult hygiene products and other similar applications.
Water Absorbent Polymer Safety
As one of the trustworthy Chinese water absorbent polymer suppliers, our superabsorbent polymer has been widely tested and is considered to be non-toxic by ingestion or application to the skin and not irritating or sensitising to the skin. Testing against various ecological indicator organisms indicates that the material does not represent an environmental hazard.
For more information about anionic polymer, please feel free to contact us!
SINOFLOC nonionic flocculants are technically pure polyacrylamides. Nonionic polyacrylamide exhibits neutral nonionic properties in the aqueous solution which is hardly influenced by the PH value in the application. SINOFLOC nonionic flocculant polyacrylamide are suitable for use as a settlement aid in many different mineral-processing applications and are particularly effective under very low PH conditions, as encountered in acidic leach operations.
Nonionic Polyacrylamide (PAM) Specifications
Products Product Code Charge Molecular Weight
Nonionic PAM Powder SINOFLOC 9010
SINOFLOC polyamine is liquid, cationic coagulants with different solid contents and viscosities and suitable a wide range of PH. Our products could be used as mixture compatible with polymeric aluminium for waste water treatment of turbid river and tap water and also could be used in wastewater treatment (drinking and wastewater), textiles, cosmetics, mining (coal, gold, diamonds etc.), paper making, soil treatment and oil industries.
Our products could work effectively as primary coagulants and charge neutralization agents and could reduce the dosage of inorganic coagulants for turbidity reduction or waste water streams, with good water coagulation and flocculation performance.
SINOFLOC Polyamine Benefits
Suitable for a wide range of PH
Could be used alone or in a combination
More economical in cost
Handling
Corrosion towards most standard materials of construction is very low. Stainless steel, fiberglass, polyethylene, polypropylene and epoxy coated surfaces are recommended. In some cases aluminium surfaces can be adversely affected. Spilled product is slippery underfoot, very slippery when wet. Shipping and handling of this product can be found in the relevant MSDS. Disposal of product must comply with all national, state and local laws.
SINOFLOC polyamine coagulant is liquid, cationic coagulant with different solid contents and viscosities and suitable a wide range of PH. Our products could be used as mixture compatible with polymeric aluminium for waste water treatment of turbid river and tap water and also could be used in wastewater treatment (drinking and wastewater), textiles, cosmetics, mining (coal, gold, diamonds etc.), paper making, soil treatment and oil industries.
Our products could work effectively as primary coagulants and charge neutralization agents and could reduce the dosage of inorganic coagulants for turbidity reduction or waste water streams, with good water coagulation and flocculation performance.
SINOFLOC Polyamine Benefits
Suitable for a wide range of PH
Could be used alone or in a combination
More economical in cost
Handling
Corrosion towards most standard materials of construction is very low. Stainless steel, fiberglass, polyethylene, polypropylene and epoxy coated surfaces are recommended. In some cases aluminium surfaces can be adversely affected. Spilled product is slippery underfoot, very slippery when wet. Shipping and handling of this product can be found in the relevant MSDS. Disposal of product must comply with all national, state and local laws.
