FR-4 copper clad laminated sheet uses glass fiber cloth as substrate material. After being immersed with epoxy resin and then baked into prepreg sheet, several prepreg sheets are then coated with copper foil on one side or both sides, and CCL is finally formed by hot pressing and curing.
FR-4 CCL sheet has excellent thermal stability and machinability, widely used in the manufacture of printed circuit board (PCB) for television sets, computers, communications equipment and other electronic products.
Copper Thickness:18um,25um,35um,70um
Board Thickness: 0.8mm,1mm,1.2mm,1.5mm,1.6mm
Size:37*49inch, 41*49inch,43*49inch
Color: Yellow/Green
Brand:Chifeng
Style: Laminated Fiberglass Board
Use: PCB,Electrical, electrical, power, drive
Side: Single side and Double side
XPC Copper clad laminated sheet/CCL consist of bleached wood pulp paper, impregnated with modified phenolic resin and clad with electrolytic copper foil.It has high dimension stability, good punching behavior at low temperature, high thermal resistance and are widely used for computers, telephones, Hi-Fi acoustic devices, electronic toys and etc.
Material: paper based
Size: 40*48inch
Board Thickness: 0.8mm,1mm,1.2mm,1.5mm,1.6mm
Copper Thickness: 18um,25um,35um,70um
Color: brown
FR-1 copper clad laminated sheet/CCL consist of bleached wood pulp paper, impregnated with flame retardant phenolic-epoxy resin and clad with electrolytic copper foil.It has high electrical stability, good flame retardancy, good dimension stability and smoothness, good punching ability and widely used for Hi-Fi acoustic devices, color TV sets and other electronic appliances.
Copper Thickness:18um,25um,35um,70um
Board Thickness: 0.8mm,1mm,1.2mm,1.5mm,1.6mm
Size:40*48inch
Color: Brown
Brand:Chifeng
CEM-1 copper clad laminate consists of bleached fiber glass cloth, impregnated with flame retardant epoxy resin and clad with single glass fabric and electrolytic copper foil. It has high electrical and electrical strength, good flame retardancy, good dimension stability, lower bow and twist: it is widely used for computers, VCD sets, Hi-Fi acoustic devices and other high grade electronic appliances.
Size 40*48inch
Thickness 0.8mm,1mm,1.2mm,1.6mm,2.4mm
Copper Thickness 18um,25um,35um,70um
Color white /yellow
CEM-3 copper clad laminate consists of bleached fiber glass cloth, impregnated with flame retardant epoxy resin and clad with single glass fabric and electrolytic copper foil. It has high electrical and electrical strength, good flame retardancy, good dimension stability, lower bow and twist: it is widely used for computers, VCD sets, Hi-Fi acoustic devices and other high grade electronic appliances.
Size 40*48inch
Thickness 0.8mm,1mm,1.2mm,1.6mm,2.4mm
Copper Thickness 18um,25um,35um,70um
Color white /yellow
XPC Copper clad laminated sheet/CCL consist of bleached wood pulp paper, impregnated with modified phenolic resin and clad with electrolytic copper foil.It has high dimension stability, good punching behavior at low temperature, high thermal resistance and are widely used for computers, telephones, Hi-Fi acoustic devices, electronic toys and etc.
Material: paper based
Size: 40*48inch
Board Thickness: 0.8mm,1mm,1.2mm,1.5mm,1.6mm
Copper Thickness: 18um,25um,35um,70um
Color: brown
CEM-3 copper clad laminate consists of bleached fiber glass cloth, impregnated with flame retardant epoxy resin and clad with single glass fabric and electrolytic copper foil. It has high electrical and electrical strength, good flame retardancy, good dimension stability, lower bow and twist: it is widely used for computers, VCD sets, Hi-Fi acoustic devices and other high grade electronic appliances.
Size: 40*48inch
Board Thickness: 0.8mm,1mm,1.2mm,1.5mm,1.6mm
Copper Thickness: 18um,25um,35um,70um
Color:white /yellow
FR-4 copper clad laminated sheet uses glass fiber cloth as substrate material. After being immersed with epoxy resin and then baked into prepreg sheet, several prepreg sheets are then coated with copper foil on one side or both sides, and CCL is finally formed by hot pressing and curing.
FR-4 CCL sheet has excellent thermal stability and machinability, widely used in the manufacture of printed circuit board (PCB) for television sets, computers, communications equipment and other electronic products.
Copper Thickness:18um,25um,35um,70um
Board Thickness: 0.8mm,1mm,1.2mm,1.5mm,1.6mm
Size:37*49inch, 41*49inch,43*49inch
FR-4 copper clad laminated sheet uses glass fiber cloth as substrate material. After being immersed with epoxy resin and then baked into prepreg sheet, several prepreg sheets are then coated with copper foil on one side or both sides, and CCL is finally formed by hot pressing and curing.
FR-4 copper clad laminated sheet has excellent thermal stability and machinability, widely used in the manufacture of printed circuit board (PCB) for television sets, computers, communications equipment and other electronic products.
FR-1 copper clad laminated sheet/CCL consist of bleached wood pulp paper, impregnated with flame retardant phenolic-epoxy resin and clad with electrolytic copper foil.It has high electrical stability, good flame retardancy, good dimension stability and smoothness, good punching ability and widely used for Hi-Fi acoustic devices, color TV sets and other electronic appliances.
FR-1copper clad laminated sheet/CCL consist of bleached wood pulp paper, impregnated with flame retardant phenolic-epoxy resin and clad with electrolytic copper foil.It has high electrical stability, good flame retardancy, good dimension stability and smoothness, good punching ability and widely used for Hi-Fi acoustic devices, color TV sets and other electronic appliances.
Material: paper based
Size: 40*48inch
Board Thickness: 0.8mm,1mm,1.2mm,1.5mm,1.6mm
Copper Thickness: 18um,25um,35um,70um
Color: brown
CEM-1 copper clad laminate consists of bleached fiber glass cloth, impregnated with flame retardant epoxy resin and clad with single glass fabric and electrolytic copper foil. It has high electrical and electrical strength, good flame retardancy, good dimension stability, lower bow and twist: it is widely used for computers, VCD sets, Hi-Fi acoustic devices and other high grade electronic appliances.
Size: 40*48inch
Board Thickness: 0.8mm,1mm,1.2mm,1.5mm,1.6mm
Copper Thickness: 18um,25um,35um,70um
Color:white /yellow
FR-4 copper clad laminated sheet uses glass fiber cloth as substrate material. After being immersed with epoxy resin and then baked into prepreg sheet, several prepreg sheets are then coated with copper foil on one side or both sides, and CCL is finally formed by hot pressing and curing.
FR-4 CCL sheet has excellent thermal stability and machinability, widely used in the manufacture of printed circuit board (PCB) for television sets, computers, communications equipment and other electronic products.
FR-1copper clad laminated sheet/CCL consist of bleached wood pulp paper, impregnated with flame retardant phenolic-epoxy resin and clad with electrolytic copper foil.It has high electrical stability, good flame retardancy, good dimension stability and smoothness, good punching ability and widely used for Hi-Fi acoustic devices, color TV sets and other electronic appliances.
Material: paper based
FR-1copper clad laminated sheet/CCL consist of bleached wood pulp paper, impregnated with flame retardant phenolic-epoxy resin and clad with electrolytic copper foil.It has high electrical stability, good flame retardancy, good dimension stability and smoothness, good punching ability and widely used for Hi-Fi acoustic devices, color TV sets and other electronic appliances.
Material: paper based
FR-1copper clad laminated sheet/CCL consist of bleached wood pulp paper, impregnated with flame retardant phenolic-epoxy resin and clad with electrolytic copper foil.It has high electrical stability, good flame retardancy, good dimension stability and smoothness, good punching ability and widely used for Hi-Fi acoustic devices, color TV sets and other electronic appliances.
Material: paper based
Size: 40*48inch
FR-1copper clad laminated sheet/CCL consist of bleached wood pulp paper, impregnated with flame retardant phenolic-epoxy resin and clad with electrolytic copper foil.It has high electrical stability, good flame retardancy, good dimension stability and smoothness, good punching ability and widely used for Hi-Fi acoustic devices, color TV sets and other electronic appliances.
Material: paper based
Size: 40*48inch
Al-CCL standard size is 1000*1200mm(40*48 inch),thickness from 0.4mm to 4mm.Thermal conductivity include 0.5,1,1.5,2.0W.And all our products have been compiled series with all complete specifications.
Aluminium copper clad laminats is widely used for the modifier and sparker on fire for motorcycle and mobile, power LED, sound box, power supply module and acoustics shielding system etc.
Copper Thickness:18um,25um,35um,70um
Board Thickness: 0.4mm, 0.8mm,1mm,1.2mm,1.5mm,1.6mm
Film: Blue/Green or without any film
Brand:Chifeng
Material: Aluminium Core+copper
Application: LED lamp
Side: Single side
FR-4 copper clad laminated sheet uses glass fiber cloth as substrate material. After being immersed with epoxy resin and then baked into prepreg sheet, several prepreg sheets are then coated with copper foil on one side or both sides, and CCL is finally formed by hot pressing and curing.
FR-4 CCL sheet has excellent thermal stability and machinability, widely used in the manufacture of printed circuit board (PCB) for television sets, computers, communications equipment and other electronic products.
Copper Thickness:18um,25um,35um,70um
Board Thickness: 0.8mm,1mm,1.2mm,1.5mm,1.6mm
Size:37*49inch, 41*49inch,43*49inch
Color: Yellow/Green
Style: Laminated Fiberglass Board
Use: PCB, electrical, power, drive
Side: Single side and Double side
Epoxy resin fiberglass filament wound tubes are made of non-stop fiber wet winding. It is specially developed for high-voltage electrical equipment structural parts such as reactor, lightning arrester, fuse, transformer, on load tap changer, transformer,etc.
Electrical insulation FR4 G10 epoxy resin fiberglass rod is made from glass cloth fabric impregnated with epoxy resin, then heated into prepreg and rolling into the rod shape, finally put into the different diameters molds, under high temperature and pressure to cure into the rigid laminated rods. Usually for mechanical & electrical applications, with good moisture resistance.
Diameter 6-110mm
Length 1,000mm
Color green/natural
Epoxy resin fiberglass filament wound tubes are made of non-stop fiber wet winding. It is specially developed for high-voltage electrical equipment structural parts such as reactor, lightning arrester, fuse, transformer, on load tap changer, transformer,etc. The product performance parameters meet the requirements of IEC standards,the product is leading in China.
Standard color: Green
Feature: Dielectric Properties
Size: length 1000mm, different ID and OD
Durostone sheet is a composite material made of high blast nano fiber felt and high-performance epoxy resin. It has the characteristics of low thermal conductivity, flame resistance, high temperature resistance, anti-static, light weight, chemical corrosion resistance and so on.
Durostone sheet is widely used in electronics, aviation, shipping and other fields. In the field of protective materials for welding in electronic manufacturing, synthetic slate material has the best choice for processing workpieces with easy processing and high strength requirements, and the thin plate maintains the maximum bending strength in the hot state and heating process. It provides a durable, high temperature resistant and anti-static PCB carrier for wave soldering /reflow soldering in electronic manufacturing. It can maintain good mechanical strength in continuous use at a high temperature of
280 degrees.
G10 fiberglass laminated Rod is also called epoxy resin alkali-free fiberglass laminated board. It is made by electronic grade fiberglass cloth impregnated with heat-resistant epoxy resin under hot pressing with stable electrical insulation property, good flatness, smooth surface and standard thickness tolerance.
Length:1000mm
Diameter: 6-110mm
Color: green
Electrical insulation FR4 G10 epoxy resin fiberglass rod is made from glass cloth fabric impregnated with epoxy resin, then heated into prepreg and rolling into the rod shape, finally put into the different diameters molds, under high temperature and pressure to cure into the rigid laminated rods. Usually for mechanical & electrical applications, with good moisture resistance.
Electrical insulation FR4 G10 epoxy resin fiberglass rod is made from glass cloth fabric impregnated with epoxy resin, then heated into prepreg and rolling into the rod shape, finally put into the different diameters molds, under high temperature and pressure to cure into the rigid laminated rods. Usually for mechanical & electrical applications, with good moisture resistance.
FR4 G10 epoxy fiberglass tube is made of alkali-free glass fabric and binded with epoxy resin, in heat rolling and tightening, baking and curing, with high mechanical property and stable electrical property in high humidity, suitable for being used as insulation structural parts of mechanical, electrical and electronic equipment.
3240 epoxy fiber glass cloth laminated sheet /epoxy resin sheet is made by impregnating an alkali-free E glass cloth into epoxy resin and phenolic resin, then baking and hot pressing under high temperature and high pressure environment.
Size:1020*1220mm,1020*2020mm,1220*2440mm or customized
Color: yellow
Thickness:0.5mm-100mm
Component Epoxy resin/phenolic + Glass fiber cloth
GPO3 Fiberglass Laminated Sheet is alkali-free fiberglass mat dipped into unsaturated polyester resin adding relevant chemical agent as the basic material pressed under high temperature molded into rigid panel as insulating material. It has good electrical property under high humidity and high mechanical property under medium temperature, fine fire retardant property, good arc resistance and tracking resistance. It's widely used in the low voltage electrical industries such as making of phase and end barriers, insulating supports, bus bar supports and mounting panels in switch-gear and other types of electrical apparatus.
Thickness 1mm---60mm
Sheet size 1020mm *1220mm, 1220mm*2440mm and other negotiated thickness or/ sizes.
Main color: red, white or other negotiated colors
Epoxy resin fiberglass filament wound tubes are made of non-stop fiber wet winding. It is specially developed for high-voltage electrical equipment structural parts such as reactor, lightning arrester, fuse, transformer, on load tap changer, transformer,etc.
Vulcanlized fiber sheet is a hard working paper.Finished products are flat, reel, tube and so on.Paper is hard.Excellent elasticity, wear resistance, corrosion resistance, heat resistance, mechanical strength, insulation and mechanical processing and molding properties.
Vulcanized fibre is a laminated plastic composed of only cellulose. Vulcanized fibre is a tough, resilient, it is lighter than aluminium, tougher than leather, and stiffer than most thermoplastics.
Color: Grey,Red,Black,White,Brick-red
Size: the length is about 1600mm, the width is about 1200mm.
3025 lamination sheets also know as phenolic cotton cloth laminated sheet or bakelite,It is made of cotton cloth and phenolic resin.
Component:Phenoilic resin + Weave cotton cloth
Usage:High voltage insulation or kinds of job
Thickness: 0.5-80mm
Standard size: 1030*2030mm, 1220*2440mm
Color: Brown
Vertical bending strength: >100MPa
Tensile strength: >80MPa
Notched Impact strengthï¼?>8.8KJ/ã?¡
Aluminium copper clad laminates is widely used for the modifier and sparker on fire for motorcycle and mobile, power LED, sound box, power supply module and acoustics shielding system etc.
Al-CCL standard size is 1000*1200mm(40*48 inch),thickness from 0.4mm to 4mm. And all our products have been compiled series with all complete specifications.
Copper Thickness:18um,25um,35um,70um
Board Thickness: 0.4mm, 0.8mm,1mm,1.2mm,1.5mm,1.6mm
Thermal conductivity: 0.5,1,1.5,2.0W.
Size: 1000*1200mm
Film: Blue/Green or without any film
Brand:Chifeng
Material: Aluminium Core+copper
Application: LED lamp
Side: Single side
3021 Bakelite sheet also know as phenolic paper laminated sheet, is made of Bleached paper and phenolic resin.We have a series of 3021 lamination sheets ,Thickness from 0.5mm to 100mm, inculding several color of orange, light brown, black...Besides the raw material, we also provide CNC machine for processing.
Sizeï¼?1030*2030mm,1030*1230mm,1200*1400mm,1220*2440mm
Thickness:0.5-100mm
Density:1.3-1.45g/cm³
Water absorption:
3025 lamination sheets also know as phenolic cotton cloth laminated sheet or bakelite,It is made of cotton cloth and phenolic resin.
Component:Phenoilic resin + Weave cotton cloth
Usage:High voltage insulation or kinds of job
Thickness: 2-80mm
Standard size: 1030*2030mm, 1220*2440mm
Color: Brown
Vertical bending strength: >100MPa
Tensile strength: >80MPa
Notched Impact strength >8.8KJ
3723/3725 is mainly used as insulating machine parts of electric equipment, screw and wear resistant component of machinery, etc.
Component:Phenolic resin + Weave cotton cloth
Usage:High voltage insulation or kinds of job
Diameter: 20-200mm
Standard length: 1000mm
Color: Brown
Bakelite phenolic cotton rod is made from cotton fabric impregnated with phenolic resin, then heated into prepreg and rolling into the rod shape, finally put into the different diameters molds, under high temperature and pressure to cure into the rigid laminated rods. Usually for mechanical & electrical applications.
1.Vulcanized fiber sheet is a material manufactured by gelatinizing several plies of high purity cellulose papers.
2.Wood pulp as its material unique and modern paper-making technology and advanced equipments. High dielectric strength and elasticity, strong oil resistance, wear resistance, corrosion resistance and heat resistance.
Vulcanized fiber tube is manufactured by winding zinc chloride treated paper on making mandrel to the predetermined wall thickness. They are then going through puring, drying, rolling, grinding, and sanding processes to get desired inside and outside diameters.
It has good physical properties, mechanical properties, dielectric strength, arc resistance, and arc-quenching characteristics. Because of its excellent machinability, vulcanized fiber tube can be sanded, knurled, spirally cut, threaded, lathed, and easily fabricated to various products.
3021 Bakelite sheet also know as phenolic paper laminated sheet is made of Bleached paper and phenolic resin.We have a series of 3021 lamination sheets ,Thickness from 0.5mm to 80mm, inculding several color of orange, light brown, black...Besides the raw material,we also provide CNC machine for processing.
Sizeï¼?1030*2030mm,1030*1230mm,1200*1400mm,1220*2440mm
Thickness:0.5-80mm
Density:1.3-1.45g/cm³
Water absorption:
3723/3725 is mainly used as insulating machine parts of electric equipment, screw and wear resistant component of machinery, etc.
Component:Phenolic resin + Weave cotton cloth
Usage:High voltage insulation or kinds of job
Diameter: 20-200mm
Standard length: 1000mm
Color: Brown
Mica sheet is made of high-quality Muscovite paper, phlogopite paper or synthetic mica paper as the base material,high-temperature silicone resin as the adhesive, baked and pressed at high temperature.
Hard mica board is specially developed and designed to meet the characteristic requirements of high temperature insulation and electrical insulation. It is mainly used in the following industries:
1.Household appliances industry (including oven, toaster, hair dryer, electric kettle, electric iron, air heater, curler, electricwire heater, wallboard heater, etc.)
2.Metallurgical Industry (electric frequency furnace, industrial frequency furnace, electric arc furnace, etc.)
3.Chemical industry and medical equipment industry, as heating bracket, gasket, partition, etc.
Mica sheet is made of high-quality Muscovite paper, phlogopite paper or synthetic mica paper as the base material,high-temperature silicone resin as the adhesive, baked and pressed at high temperature.
Hard mica board is specially developed and designed to meet the characteristic requirements of high temperature insulation and electrical insulation. It is mainly used in the following industries:
1.Household appliances industry (including oven, toaster, hair dryer, electric kettle, electric iron, air heater, curler, electricwire heater, wallboard heater, etc.)
2.Metallurgical Industry (electric frequency furnace, industrial frequency furnace, electric arc furnace, etc.)
3.Chemical industry and medical equipment industry, as heating bracket, gasket, partition, etc.
Mica sheet is made of high-quality Muscovite paper, phlogopite paper or synthetic mica paper as the base material,high-temperature silicone resin as the adhesive, baked and pressed at high temperature.
Hard mica board is specially developed and designed to meet the characteristic requirements of high temperature insulation and electrical insulation. It is mainly used in the following industries:
1.Household appliances industry (including oven, toaster, hair dryer, electric kettle, electric iron, air heater, curler, electricwire heater, wallboard heater, etc.)
2.Metallurgical Industry (electric frequency furnace, industrial frequency furnace, electric arc furnace, etc.)
3.Chemical industry and medical equipment industry, as heating bracket, gasket, partition, etc.
Mica sheet is made of high-quality Muscovite paper, phlogopite paper or synthetic mica paper as the base material,high-temperature silicone resin as the adhesive, baked and pressed at high temperature.
Hard mica board is specially developed and designed to meet the characteristic requirements of high temperature insulation and electrical insulation. It is mainly used in the following industries:
1.Household appliances industry (including oven, toaster, hair dryer, electric kettle, electric iron, air heater, curler, electricwire heater, wallboard heater, etc.)
2.Metallurgical Industry (electric frequency furnace, industrial frequency furnace, electric arc furnace, etc.)
3.Chemical industry and medical equipment industry, as heating bracket, gasket, partition, etc.
Mica sheet is made of high-quality Muscovite paper, phlogopite paper or synthetic mica paper as the base material,high-temperature silicone resin as the adhesive, baked and pressed at high temperature.
Hard mica board is specially developed and designed to meet the characteristic requirements of high temperature insulation and electrical insulation. It is mainly used in the following industries:
1.Household appliances industry (including oven, toaster, hair dryer, electric kettle, electric iron, air heater, curler, electricwire heater, wallboard heater, etc.)
2.Metallurgical Industry (electric frequency furnace, industrial frequency furnace, electric arc furnace, etc.)
3.Chemical industry and medical equipment industry, as heating bracket, gasket, partition, etc.
FR-4 copper clad laminated sheet uses glass fiber cloth as substrate material. After being immersed with epoxy resin and then baked into prepreg sheet, several prepreg sheets are then coated with copper foil on one side or both sides, and CCL is finally formed by hot pressing and curing.
FR-4 CCL sheet has excellent thermal stability and machinability, widely used in the manufacture of printed circuit board (PCB) for television sets, computers, communications equipment and other electronic products.
Copper Thickness:18um,25um,35um,70um
Board Thickness: 0.8mm,1mm,1.2mm,1.5mm,1.6mm
FR-1copper clad laminated sheet/CCL consist of bleached wood pulp paper, impregnated with flame retardant phenolic-epoxy resin and clad with electrolytic copper foil.It has high electrical stability, good flame retardancy, good dimension stability and smoothness, good punching ability and widely used for Hi-Fi acoustic devices, color TV sets and other electronic appliances.
Material: paper based
Size: 40*48inch
PTFE Extruded Rod is made from 100% virgin PTFE with biaxially oriented, and more strength than ptfe joint sealant. it is white color, peak temperature 310,In possession of the characteristics of self-lubrication, low coefficient of friction and widely chemical corrosion resistance with good resistance of pressing, cold flow, and creep relaxation.
FR-4 copper clad laminated sheet uses glass fiber cloth as substrate material. After being immersed with epoxy resin and then baked into prepreg sheet, several prepreg sheets are then coated with copper foil on one side or both sides, and CCL is finally formed by hot pressing and curing.
FR-4 CCL sheet has excellent thermal stability and machinability, widely used in the manufacture of printed circuit board (PCB) for television sets, computers, communications equipment and other electronic products.
Copper Thickness:18um,25um,35um,70um
Board Thickness: 0.8mm,1mm,1.2mm,1.5mm,1.6mm
Size:37*49inch, 41*49inch,43*49inch
Color: Yellow/Green
Brand:Chifeng
Style: Laminated Fiberglass Board
Use: PCB,Electrical, electrical, power, drive
Side: Single side and Double side
PTFE Sheet is a 100% expanded PTFE gasket material and combined with a self-adhesive strip for easy application. It can be used as a jointing on all types of flanges and can be used with almost all fluids for its excellent corrosion resistance, high pressure resistance, convenient in using, soft and stretched structure, Sticked onto sealing face (it has glue on one face) with one piece of belt, two ends of which are crossed together that would be formed a sealing gasket. So it is an ideal sealing material for enamel, glass, rough and special shaped sealing surface.
3240 epoxy fiber glass cloth laminated sheet /epoxy resin sheet is made by impregnating an alkali-free E glass cloth into epoxy resin and phenolic resin, then baking and hot pressing under high temperature and high pressure environment.
Size:1020*1220mm,1020*2020mm,1220*2440mm or customized
Color: yellow
Thickness:0.5mm-100mm
Component Epoxy resin/phenolic + Glass fiber cloth
Durostone Sheet also called Synthetic stone sheet is a composite material made of high blast nano fiber felt and high-performance epoxy resin. It has the characteristics of low thermal conductivity, flame resistance, high temperature resistance, anti-static, light weight, chemical corrosion resistance and so on.
