Durostone sheet is a composite material made of high blast nano fiber felt and high-performance epoxy resin. It has the characteristics of low thermal conductivity, flame resistance, high temperature resistance, anti-static, light weight, chemical corrosion resistance and so on.
Durostone sheet is widely used in electronics, aviation, shipping and other fields. In the field of protective materials for welding in electronic manufacturing, synthetic slate material has the best choice for processing workpieces with easy processing and high strength requirements, and the thin plate maintains the maximum bending strength in the hot state and heating process. It provides a durable, high temperature resistant and anti-static PCB carrier for wave soldering /reflow soldering in electronic manufacturing. It can maintain good mechanical strength in continuous use at a high temperature of
280 degrees.
Supplier: Tarpaulin, tarp, pe tarp, frp, grp, grating, pultruded, composite, frp rebar, panel tanks, pond liner, geomembrane, junction box, truck cover, boat cover, tent, camping, current transformers, indoor current transformers, outdoor transformers, switch gears, oil filled tank type transformers, wound primary type transformers, bar type transformers, window type transformers
The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient. Basalt fiber roving is a new material to replace glass fiber and carbon fiber
black fiberglass tissue can offer widest range of woven fabrics which are made of E-glass yarn. Our woven glass fabrics are manufacture with state of the art weaving technology and the best control over thickness, weight and strength.We can offers the materials engineer a wide choice of control fabric properties to satisfy design needs and objectives. Our extensive range of Fibreglass fabrics are globally recognised for its quality. black fiberglass tissue with fire retardant and alkali-free performance, is suitable as a surface lamination for fiberglass wool and rock wool thermal insulation.
The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient. Basalt fiber roving is a new material to replace glass fiber and carbon fiber
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
Fishing boat, business boat, passenger boat, cabin boat, fiberglass boat, FRP boat, yacht, fish speed boat, leisure boat, rowing boat, power boat. Name : Specification Boat Materials : Fiberglass Boat size: 9.8m*2.81m*1.26m Max people : 11+1 Engine : outboard :115 x 2 Waterline : 0.45m above speed : 50km/h
18455kgs of Fiberglass E GLASS DIRECT ROVING Ref: E6DR17-2400-386T for 9 289kgs + Ref: E6DR24-4800-386H for 9 166kgs TAKE ALL - 20 pallets (25m3) - 18 000 $ EXW FRANCE (59) Roving Direct is a single strand fiberglass filament yarn wound directly onto a spool without twisting. directly onto a spool without twisting. The term "E Glass" refers to the composition of the glass, which is a type of silica-based glass containing boron oxide boron oxide, aluminium oxide and other oxides. E Glass Direct Roving is mainly used as a reinforcement in polyester or epoxy resin composites to increase their mechanical strength stiffness and durability. It is also used in the manufacture of fibreglass products such as boats, storage tanks, swimming pools body panels and reinforcement parts for construction.
Fiberglass really is made of glass similar to that in windows or kitchen drinking glasses. To manufacture fiberglass, glass is heated until molten, then forced through superfine holes. This creates glass filaments that are extremely thin so thin, in fact, that they're best measured in microns
Fiberglass rebar area of application Fittings made of composite materials are a product of new technologies, the technical characteristics of which make it possible to successfully use it as an alternative to traditional steel fittings in construction of: Foundation; Marine and port facilities; Reinforcement of concrete tanks; Repair and strengthening of bearing capacity of brick and reinforced concrete structures; Road slabs, airfield slabs; For the production of small architectural forms; For the road paving and decking of highway bridges; The implementation of the infrastructure elements in the chemical industries; Repair of damaged brick and reinforced concrete structures; Fittings are used for constructions based on gypsum binders; Construction of swimming pools and industrial pools; The application of fiberglass fittings in civil and industrial construction is caused by many variables: Low specific gravity; High corrosion resistance; Low thermal conductivity of composite materials; High strength, several times the strength of steel fittings; Is a dielectric; Durability; As known, the main drawback of traditional low-carbon steel fittings is a low index of corrosion resistance, which limits their use in the construction of marine facilities and constructions located in the zone of variable water level.
