The company brings the fines quality MS (mild steel), Alloy Steel and Stainless steel Round bars. Manufactured from the best raw steel alloys our steel bar
Supply Condition : Hot rolled, annealed, hardened and hardened + tempered
ROUNDS: 8mm to 500mm
SECTIONALS: As per Required by Customer
We offer superior quality Round bars in a variety of grades, sizes and tolerances.
Applications
They are extensively used in the Automobile industry and products like nuts, rivets, studs, bolts, connecting rods, piston rods, drills, pouches, injector, connecting rods, axles, propeller shafts and many more.
Supply Conditions
Length - 3 to 6.5 Meters
Cold Drawn, Centerless Ground, Peeled & Polished, Rough
Peeled or Smooth Turned bars
Tolerances - h9, h10, h11, k12, k13
Grit Polish as per Customer's Request
Heat Treatment- Annealed, Solution Annealed or Water Quenched
Bars End Finish - Chamfered ends, Plain ends without Burrs or Sharp Edges
Specifications - As per EN, DIN, JIS, ASTM, BS, ASME, AISI, etc.
The company brings the fines quality MS (mild steel), Alloy Steel and Stainless steel bright bars. Manufactured from the best raw steel alloys our steel bright bars They are available in various shapes and sizes like round, square, flat and hexagonal.
ROUNDS: 5mm to 110mm
SQUARES: 6mm to 40mm
HEXAGONALS: 6mm to 40mm
SECTIONALS: As per Required by Customer
We offer superior quality bright bars in a variety of grades, sizes and tolerances.
Applications
They are extensively used in the Automobile industry and products like nuts, rivets, studs, bolts, connecting rods, piston rods, drills, pouches, injector, connecting rods, axles, propeller shafts and many more.
Supply Conditions
Length - 3 to 6.5 Meters
Cold Drawn, Centerless Ground, Peeled & Polished, Rough
Peeled or Smooth Turned bars
Tolerances - h9, h10, h11, k12, k13
Grit Polish as per Customer's Request
Heat Treatment- Annealed, Solution Annealed or Water Quenched
Bars End Finish - Chamfered ends, Plain ends without Burrs or Sharp Edges
Specifications - As per EN, DIN, JIS, ASTM, BS, ASME, AISI, etc.
We are supplier and exporter of TMT Rebars. TMT Bars / Rebar which find usage in the core infrastructure development like construction of Multi Storied buildings, bridges, dams, railways, power plants as reinforcement material. These bars are rolled from Tested billets as per IS 2830 which ensures uniform physical and mechanical properties. The range varies from 8mm to 32mm, conforming to BIS 1786 - Fe 415 and Fe 500. Properties Units IS : 1786 Fe 415 OUR BARS IS: 1786 Fe 500 OUR BARS
Length: 6- 12 meter
Steel Billets
Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast.
steel billets from 45 x 45 mm to 150x150 mm, and round steel billets from 120 mm to 270 mm in diameter. Length : Specifiable up to 12 m
Asian market - bloom 250*300*4500-5400mm, 300*400*3000-5500mm,
steel grade: S235JR, S275JR, S355J2,C45, C45E, Fe360, 18NiCrMo5, 42CrMoS4, 39NlCrMo3, 20MnCrS5, 10, 20, 35, 45 and standard for product: EN 10025-1,2:2005, contract, EN 10083-2:2006, EN 10083-3:2007, GOST 1050-88. - concast billet 125*125mm, 8000-12000mm long, made of carbon (0.06-60%C content) and low-alloy steel according to GOST standards (GOST 380-94; GOST 1050-88, GOST 4543-71, GOST 5781-82, GOST 10884-94, TU14-1-4268, TU400074854.043-2002. - hot rolled billet 125*125mm, 4000-12000mm long, made of a wide steel range according to TU 14-1-4492-88, GOST 10702-78, GOST 380-94, GOST 14959-79. - tube billet D90-160mm, steel grade (10, 20, 35, 45, 20X, 40X, 09G2C,D), standard for product GOST 14-21-77
Seamless / ERW Pipes : ASTM/ASME A106 Gr.A/B/C, A53 Gr. A/B, API5L, X42, X52, X65, etc. Seamless Boiler Tubes : BS-3059/part2 & ASTM A-179 or equivalent. ERW Boiler Tubes : BS-3059/part 1 or 3 RANGE : SIZE - 1/4" TO 56" THICKNESS : 0.5 mm TO 60 mm SCHEDULE : SCH. 5 TO SCH. XXS TUBE RANGE : SIZE: 3 mm OD to 60 mm OD THICKNESS : 0.1 mm TO 6.00 mm
Reheating Furnace fully automated with dual fired burner LPG/LDO.s
High-pressure De-scaler.
4-Stand Housing less Roughing Mill in horizontal and vertical combination.
10-Stand Housing less Continuous Mill in horizontal/vertical combination with 8 loopers for tension free rolling and 2 shears for end cutting.
4 Cantilever stands in horizontal and vertical combination with Tungsten Carbide (TC) Rings.
10-Stand V-type, no twist wire rod block.
Primary cooling line for controlling laying temperature.
Laying head.
70 m long cooling conveyor with retarded, forced cooling and online quenching facility.
Pallet type coil handling with vertical compactor.
Mill fully automated by ABB drive and PLC.
Solution Annealing Furnace.
Pickling line with Effluent Treatment Plant.
Wendt CNC grinding machine for TC Rings
PRODUCT SPECIFICATIONS
WIRE ROD
a. SIZE RANGE : 5.5 - 32 mm
(Wire rod block )
COIL DIMENSIONS : ID: 800 - 900 mm OD: 1250 (wire rod block)
TOLERANCE : As per EN 10088
SUPPLY CONDITION: Hot rolled (HR
Hot rolled + pickled (HRP)
b . SIZE RANGE : (Available in mm) 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11, 12, 13, 14, 15, 16, 18, 20, 22, 25, 27, 29 and 32
c. Grades: EN, DIN, JIS, ASTM, BS, ASME, AISI, etc.
SUPPLY CONDITION : Hot rolled + annealed + pickled (HRAP)
