Steel Billets
Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast.
steel billets from 45 x 45 mm to 150x150 mm, and round steel billets from 120 mm to 270 mm in diameter. Length : Specifiable up to 12 m
Asian market - bloom 250*300*4500-5400mm, 300*400*3000-5500mm,
steel grade: S235JR, S275JR, S355J2,C45, C45E, Fe360, 18NiCrMo5, 42CrMoS4, 39NlCrMo3, 20MnCrS5, 10, 20, 35, 45 and standard for product: EN 10025-1,2:2005, contract, EN 10083-2:2006, EN 10083-3:2007, GOST 1050-88. - concast billet 125*125mm, 8000-12000mm long, made of carbon (0.06-60%C content) and low-alloy steel according to GOST standards (GOST 380-94; GOST 1050-88, GOST 4543-71, GOST 5781-82, GOST 10884-94, TU14-1-4268, TU400074854.043-2002. - hot rolled billet 125*125mm, 4000-12000mm long, made of a wide steel range according to TU 14-1-4492-88, GOST 10702-78, GOST 380-94, GOST 14959-79. - tube billet D90-160mm, steel grade (10, 20, 35, 45, 20X, 40X, 09G2C,D), standard for product GOST 14-21-77
STEEL BILLETS 3SP AND 5SP ORIGIN : SAUDI ARABIA, QATAR, TANZANIA, INDIA, CHINA, MUSCAT Steel billets of various dimensions available. These are available in the following sizes (mm): 100X100 ; 120x120; 125x125; 130x130 ; 150x150S Standard : JIS G3141, ASTM A653, GB, Ghos 380, BS 4449, EN 10025
Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. steel billets from 45 x 45 mm to 150x150 mm, and round steel billets from 120 mm to 270 mm in diameter. Length : Specifiable up to 12 m Quality : In various internationally well known standards including afnor (nf), aisi, astm, bs, din, euronorm, gost, jis, iso, sae, si, ts, uni, etc. (eg. Astm a 615 gr 40 or 60, bst 420 s, din 488, st 37.2 din 17100, nfa 35015 and 16, bs 4449 (gr 250 or 460), jis g 3112 (sd 30, 35, 40), si 739 s 400, si 739 s 400 w, feb 44 k, 3 sp/ps or 5 sp/ps gost 380 88, 35 gs or 25 g2s, gost 5781-82, etc) Other grades available according to customer's request
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
Steel Billets of Different Specification.
Features Of Steel Billets Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. Smaller and longer than a bloom, billets are usually a square cross-section less than 36 square inches. They are used for the manufacture of all ‘long’ steel products such as bars, rods, pipes, tubes, wire and wire products.
The steel which is made freshly, and is still in the form of a rectangle or a metal bar, is referred to as steel billet. Steel has to be processed into more useful pieces first, before its products get sold into the market. In its pure form, raw steel will not be of any use, so it must be cast into the shape. Standard : IS 1786-2008. Steel billets are used in expulsion, fashioning, rolling, and other metal-processing operations as a raw material or feedstock. Bars, poles, and places with precise shapes are made with this material. Engineering and machining parts and components are frequently produced in forges or machine shops.
Steel Billet, also called bar stock, is technically a semi-finished casting product that needs further processing before becoming a finished material. Actually, since billet is grained in its structure as a metal it processes very intricately. Steel Billet is, in fact, a length of metal with a square or round cross-section. It is used in general and structural purposes. Pipes and wires are 2 of the main products made with billets. Billets are also used as raw materials or feedstock in forging, rolling and other metal-processing operations. The range of semi-finished products above 155 mm x 155 mm is called blooms. Blooms have rectangular cross-sections. The name Bloom comes from Bloomery. Another condition for a bloom is that the cross-section must be greater than 36 sq. inches. We in Arij supply high-quality Cast Square Billets of varied lengths and cross-sections. However, standards for steel billets vary and each must feature the chemical composition necessary for producing the desired product. We provide international specifications including BS, ASTM, EN, etc. or any other tailor-made requirements of our clients. different grades: 5Sp 3sp different cross sections: 150*150 mm 130*130 mm 125*125 mm
Steel billets of various dimensions available For price and specifications, plz contact us.
