Three Phase VHS Motor
Standard:IEC
Power:5.5KW-550KW
Model:VHS132-VHS355
Speed:500-3000Rpm
No.of Poles:2,4,6,8
Voltage:380/440/560V
Frequency:50Hz
Color:As per Buyers demand
Brand:SEMC
Three Phase VHS Motor
Standard:NEMA
Power:7HP-900HP
Model:VHS254TP-VHS5008P
Speed:500-3000Rpm
No.of Poles:2,4,6,8
Voltage:380/440/560V
Frequency:60Hz
Color:As per Buyers demand
Brand:SEMC
Three Phase VHS Motor
Standard:NEMA
Power:500HP
Model:VHS355
Speed:1500Rpm
No.of Poles:4
Voltage:380/440/560V
Frequency:60Hz
Color:As per Buyers demand
Brand:SEMC
THREE PHASE AC MOTOR
Power:0.55KW-1000KW
Voltage:230/380/440/3000/3300/6000/6600/10000V
Speed:250Rpm-3000Rpm
No.of Poles:2,4,6,8,10,12,14,16,....
Frequency:50/60Hz
Color:As per customer demands
Brand:SEMC
DC ELECTRIC MOTOR
Model:Z,Z4,..
Power:0.55KW-1600KW
Speed:0-3000Rpm
Field Voltage:0-690V
Armature Voltage:0-690V
Brand:SEMC
Power : 100HP-1000HP; 1200HP-5000HP,10MW-100MW.
YL series 6KV, 10kV medium and large high-voltage vertical three-phase asynchronous motors (hereinafter referred to as motors) are our company using domestic and foreign advanced technology, combined with our company's decades of practical experience in producing high-voltage motors, in accordance with international standards, national standards and industries A series of optimized products developed as standard. It can also be treated by anti-corrosion and anti-mildew technology to derive outdoor (W) and outdoor anti-corrosion (WF) motors. This series of motors can be used directly on 10kV power grids, which has the advantages of simplifying equipment, saving investment, reducing energy consumption and so on.
JK, JS, JR, JS2, JR2, JSL, JRL series medium-sized motors are used to drive a variety of different machinery, such as fans, compressors Machines, water pumps, crushers, coal mills, cutting machine tools, transportation machinery and other equipment, and can be used as prime movers in coal mines, machinery industries, power plants and various industrial and mining enterprises.
6 Ordering instructions Please indicate the following when ordering
a. Motor model: (JS158-4)
b. Rated frequency: (50Hz/60HZ)
c. Rated power: (10KW-680kW-5000KW-100MW)
d. Rated voltage: (460-6KV-10KV-20KV)
e. Number of poles: (2-4-18 poles)
f. Outlet box position (right side of the motor [looking at the end of the motor shaft extension]
Deep well pump motor and water pump work directly: It is suitable for extracting groundwater from deep wells, and can also be used for rivers, reservoirs, canals and other water-lifting projects: mainly used for farmland irrigation and water for humans and livestock in plateau and mountainous areas, as well as cities, factories, railways , Mine, construction site for drainage. Deep well pumps and deep well pump motors with high safety and reliability have also become the first choice
VHS-Motor
Effiziente vertikale NEMA-Hohlwellenmotoren
VHS445TP-4-250S Zus�¤tzlicher Abw�¤rtsschub: 9800 (lb) 1500 U / min
VHS Motor
NEMA Premium Efficient Vertical Hollow-shaft Motors
VHS445TP-4-250S Extra Downthrust: 9800(Lb) 1500RPM
VHS IP55 TEFC 380 VOLT 50 HZ;With TERMINAL BOX
SERVICE FACTOR 1.15;PT 100 2 SETS OF 3 ELEMENTS
MAIN TERMINAL BOX HEATER GUIDE BEARING PT 100 MOTOR HEATER
TRUST BEARING PT 100 DIAL SCALE,IP55 TEFC,Top cover red,Body Grey color Working altitude 1500m NSK or SKF bearing Included heaters, sensors and boxes
VHS Motor ylb motor
NEMA Premium Efficient Vertical Hollow shaft Motors
VHS447TP-4-300S Extra Downthrust: 9800(Lb) 1500RPM
VHS IP55 TEFC 380 VOLT 50 HZ;With TERMINAL BOX
SERVICE FACTOR 1.15;PT 100 2 SETS OF 3 ELEMENTS
MAIN TERMINAL BOX HEATER GUIDE BEARING PT 100 MOTOR HEATER
TRUST BEARING PT 100 DIAL SCALE,IP55 TEFC,Top cover red,Body Grey color Working altitude 1500m NSK or SKF bearing Included heaters, sensors and boxes
VHS Motor vertical motor
NEMA Premium Efficient Vertical Hollow shaft Motors
VHS284TP-4-025P Extra Downthrust: 3200 (Lb) 1500RPM
VHS IP55 TEFC 380 VOLT 50 HZ;With TERMINAL BOX
SERVICE FACTOR 1.15;PT 100 2 SETS OF 3 ELEMENTS
MAIN TERMINAL BOX HEATER GUIDE BEARING PT 100 MOTOR HEATER
TRUST BEARING PT 100 DIAL SCALE,IP55 TEFC,Top cover red,Body Grey color Working altitude 1500m NSK or SKF bearing Included heaters, sensors and boxes
WEG electric motor
Model: MGW710-6500KW-6P-50HZ-6600V-B3R-IC81WVFD
PRODUCT(S) SPECIFICATION(S)
Three phase squirrel cage induction motor, impregnation with dielectric strengthens,
manufactured according to IEC Standards, having the following characteristics:
Brand : WEG Original
1.1. Comments
- Rate Power : 6500kw
- All electrical,mechanical and operation features according to the attached data sheet and
drawing.
- Supplied with 2 x PT100 per phase (3 leads).
- Supplied with 1 x PT100 per bearing (3 leads).
- Grounding lug in the frame.
- Grounding lug in the terminal box.
- Space Heater.
- NDE insulated end-shield.
- Water leakage detector.
- RAL5009.
- Ambient temperature : 40 �°C.
- Altitude : 1300 m.a.s.l.
The Master line (M line) motors stand out for the flexibility of their electrical and mechanical design, adapting to the strictest operating requirements in different applications.
The result of this innovative development is a product with high efficiency, meeting the requirements of international standards and in line with the world market trends.
Their design is also flexible about adaptations so as to make them interchangeable with already existing motors, cutting down
operating costs due to downtime to replace motors. This attests to the commitment WEG has to its customers and the environment, bringing solutions in optimized products and
processes.
Maximum performance of these motors can be achieved through the use of software applications developed in partnership with universities in Europe, the United States and Brazil which ensure accuracy in the design.
The optimized design, the excellent quality materials used and the strict control of all phases of the manufacturing process
allow WEG motors to be applied in different segments, such as: mining, sanitation, cement, oil and gas, naval, steel, sugar and ethanol, cellulose and paper, among others. Furthermore, this great versatility allows choosing the most suitable motor for your application or installation conditions.
In order to meet the most demanding world markets, WEGâ??s quality system is certified by Bureau Veritas Quality Institute in compliance with the requirements of ISO 9001, ISO 14001 and ISO 50001. The motors of the Master line are also certified by recognized certifying bodies, including the CSA from Canada, PTB from Germany and Baseefa from the UK
SYNCHRONOUS MOTOR
Basic model: T, TKS, TD
Armature diameter: Â 1200- Â 3550mm
Power: 200 800000Kw
Number of poles: 2-40
Voltage: 690 15000V
Frequency: 50HZ, 60HZ
Protection level: IP23, IP44, IP54, IP55
Cooling method: IC01, IC611, IC81W
Because synchronous motors can operate at advanced power factors by adjusting the excitation current, it is beneficial to improve the power factor of the power grid. Therefore, large equipment, such as large blowers, water pumps, ball mills, compressors, rolling mills, etc., are often driven by synchronous motors. This advantage is particularly prominent when low-speed large equipment uses synchronous motors. In addition, the speed of the synchronous motor is completely determined by the power frequency. When the frequency is constant, the speed of the motor is also constant, and it does not change with the load. This feature is of great significance in certain transmission systems, especially multi-machine synchronous transmission systems and precision speed regulation and speed stabilization systems. The running stability of synchronous motors is also relatively high. Synchronous motors generally operate in an over-excited state, and their overload capacity is greater than that of corresponding asynchronous motors. The torque of an asynchronous motor is proportional to the square of the voltage, while the torque of a synchronous motor is determined by the product of the voltage and the internal electromotive force generated by the motor's exciting current, which is only proportional to the first power of the voltage. When the grid voltage suddenly drops to about 80% of the rated value, the torque of the asynchronous motor often drops to about 64% and stops running because it does not move the load; while the torque of the synchronous motor does not drop much, it can also be forced by Excitation to ensure stable operation of the motor
Permanent magnet motor
KYT series (IP55) compressor special ultra-efficient permanent magnet variable frequency motor
Frame center height: H160 ~ H355
Rated output power: 15kW ~ 250kW
This series of motors uses permanent magnet motors made of rare earth permanent magnet materials. The rotor has achieved rare earth permanent magnetization, no slip, no fundamental iron in the rotor, copper loss and less heat generation, which reduces stator current and stator resistance losses. Especially at low speeds, high motor efficiency can still be maintained.
Power transformer
Transformer working for medium frequency induction furnace, electric arc furnace, continuous casting machine, rolling mill steel plant.
220kV, 110kV and 66kV low loss series transformers; products with reliable performance, low partial discharge, low loss, low noise, high reliability, and strong resistance to sudden short circuit, its excellent performance has won the majority of users and related Experts highly praise.
Partial discharge: at 1.5 times the rated voltage, the apparent discharge of the product is less than 80pC;
Noise: Product noise of 63MVA and below is below 58dB (AN);
Loss: No-load loss is about 30% lower than the IEC standard;
Reliability: All in-service products have no damage accidents and oil leakage;
Short-circuit resistance: SFZ11-50000 / 132 has passed the short-term ability test of the Netherlands KEMA and the National Transformer Quality Supervision and Inspection Center laboratory. Passed CE, UL, CSA, ROSH certification
Coil:
A
All coils are made of 100% oxygen-free copper, and high-voltage coils are tangled. Continuous structure, in order to improve the distribution characteristics under impulse voltage, to obtain a more uniform electric field distribution, the bracing pads are rounded to improve the high reliability of insulation. A
Iron core:
The core material is high-quality cold-rolled silicon steel sheet with high magnetic grain orientation, and adopts advanced German Georg automatic shearing line to control the burr of the cutting mouth to be less than 0.02 mm.
The silicon steel sheet adopts the technology of not stacking the iron yoke. The joint of the silicon steel sheet is a 45 �° full oblique stepped joint. After the iron chip is stacked, the overall pressure and epoxy glue are used to make the iron core three-pillar two yoke become a strong , Flat, high vertical accuracy, effectively improve the no-load performance, while reducing noise.
Between the iron core column and the inner coil, the iron core column is supported by a brace plate, the iron yoke is tensioned by a glass ribbon impregnated with epoxy resin, and the lower iron yoke and the lower fuel tank are topped by a back pressure nail bolt. In addition, the upper iron yoke and the upper fuel tank are fixed in three places, so the body can withstand the bumps during transportation without displacement in the fuel tank.
Transformer working for medium frequency induction furnace, electric arc furnace, continuous casting machine, rolling mill steel plant.
The S9, S10, S11 series of 20kV and 35kV three-phase oil-immersed rectifier transformers produced by our company meet the requirements of CE, UL, CSA, ROUSH, GB1094 "Power Transformer" and GB / T6451-2008 "Three-Phase Oil Immersed Power Transformer technical parameters and requirements "standard. The core is made of high-quality cold-rolled silicon steel sheet, and the coil is made of high-quality oxygen-free copper, which is beautiful in appearance and safe in operation. Widely used in steel mills, urban and rural industrial and agricultural power grids.
Main functions and features:
High reliability, advanced performance level and reasonable economic indicators.
The iron core adopts step-shaped three-level joints, and the surface is painted with cured paint to reduce loss and noise.
New winding structure, reasonable oil channel design, and new insulation structure to improve mechanical strength and short circuit resistance.
The fuel tank has various forms, beautiful and generous.
220kV, 110kV and 66kV low loss series transformers; products with reliable performance, low partial discharge, low loss, low noise, high reliability, and strong resistance to sudden short circuit, its excellent performance has won the majority of users and related Experts highly praise.
Partial discharge: at 1.5 times the rated voltage, the apparent discharge of the product is less than 80pC;
Noise: Product noise of 63MVA and below is below 58dB (AN);
Loss: No-load loss is about 30% lower than the IEC standard;
Reliability: All in-service products have no damage accidents and oil leakage;
Short-circuit resistance: SFZ11-50000 / 132 has passed the short-term ability test of the Netherlands KEMA and the National Transformer Quality Supervision and Inspection Center laboratory. Passed CE, UL, CSA, ROSH certification
INDUCTION MELTING FURNACE
Model:GW-5-4000/0.5J
Rated Power:4000KW
Capacity:5Ton
Input Voltage:1000V(12 Pulse)
Input Current:2300A
Melting rate:5T/H
Power Consumption:570-630kw.h/T
Brand:SEMC
EAF-50t Electric Arc Furnace
The actual power consumption per ton of steel is 610-180-200-10=220 kWh
Namely, the actual electrical energy needed for melting, phosphorus removal and heating up to the tapping temperature of 50% scrap steel and 50% molten iron in the arc furnace, (1630) is 220 kWh/t (e.g. oxygen blasting 50Nm3, metal charging 60%, electrical consumption 160kWh/t).
Product:Casting Machine,
Type:Vertical Billet Casting,
Material:Stainless Steel,T2 Copper,
Finish Billets:70*70*1000mm,80*80*1000mm,100*100*1000mm,120*120*1000mm,150*150*1000-2000mm,200*200*1000-2000mm,250*250*1000-2000mm
Section:Square or Round
Brand:SEMC
150T-200T Aluminium Sheet Rolling Mill
Material: Aluminium Scrap
Finished product: Aluminum sheet width 200mm-940mm, Thick 0.6 ~ 1.6mm,
Output: 150-200 tons per month ,
Medium frequency furnace (1 ton) ,
The main machine: 400 X 1300 two rollers reversible rolling mill ,
Screwdown mode: single stage screwdown drive, manual clutch ,
Screwdown motor: Y 6 N =4.5 KW, 2 units, with screwdown, lifting at the same time .Also can be respectively screwdown, lifting.
Center distance of screwdown worm gear box: A=270mm,
Screw-down adiusting screw S150 X 10, material: 40 Cr,
Screw-down display: screwdown the indicator.
Mechanical alignment guide device before the machine and after the machine Motor 3KW} JZQ250 reducer,
Roll size: 400 X 1300,
Roller specifications 120 X 1300, pitch: 170 H-shaped rolls ,
The electric control cabinet to motor operation box to the cable, electrical wires between the control line and installation accessories by The buyer is responsible for themselves. The equipment lubrication station, the supplier provides pipeline layout, the connecting pipeline under the machine,
The equipment covers an area of 30m X 15m ,
The above technical parameters for aluminum sheet Rolling.
YF6-4 Anemometer
Range:0~60m/s
Accuracy:±(0.4+0.05 Real Wind Speed)m/s
Starting Threshold:0.5m/s
Output:4~20mA
Resolution:12bit
Power Requirement:DC12~24V
Maximum Power Consumption:0.5W
Operation Temperature:-40~80�°C
Operation Humidity:0~100%
Material:Aluminum alloys,Copper,Plastics
Weight:1.5kg
Moisture Protection:IP65
