Y&D1800-II is a microcomputer precision dispensing machine newly developed by our company, which is suitable for all kinds of fluids. With manual (continuous spit out) and automatic (section spit out) functions; With the function of teaching, easy to set the initial parameters; Vacuum modulation is used to prevent dripping; It has functions of input and output signals.
Performance & Parameters:
Size: 188LX 196D X 76H
Weight: 3.4kg
Dispense� Air Setting Range: 5~700.0 Kpa
Dispense time: 0.001 -9.999S / 0.01 -99.99S
Voltage: AC100V~240V 50 / 60 HZ
Display: LED Digital Display
Vacuum Suction Range: 0~20 Kpa
Air supply: Max 0.8 Mpa
Features & Advantages:
* Suitable for all kinds of fluids;
* With manual (dispensing in continuous) and auto (dispensing in parts) functions;
* Using TEACH function which is quite convenient for initial parameter setting;
* Using vacuum adjustment mechanism to prevent drip leakage;
* With the function of input & output signals;
* Input: With / Without contact;
* Output: With contact (finish dispensing signal of standard configuration)
* 1 Year function Warranty.
Full Automatic Four Axis Cycle Working Spraying Equipment for Industry
As the machine designed by double table structure, its most outstanding function is that it can cycle operation, save time of take and put material, improve production efficiency. With point, line, face, arc, circle, and irregular curve continuous interpolation and four axes linkage, and other functions.
Four axis designed Y&D 5400-2Y dispensing robot arm is a newly designed dispensing robot arm with a working range of X/Y/Z axis of 500 300 300 100mm. It is a very popular type of dispenser in electronic products. This kind of dispensing robot arm is compact in size and economic in price which have the function of interpolation. All the axis cof this kind of dispensing robot arm can do dispensing as make points, draw lines, arc, etc. It is operate by the teach pendent which is very easy to operate and users can learn it quickly and make programs in a few minutes. The program dates can be stored in the CF Card in the machine for next time use for which dispensing the similar products. It ca4000 points in each grup). Y&D 7500N is really quite useful in a wide range, such as
Semiconductor packaging, Fixing and protection of PCB electronic
Omponents, Packaging adhesion of LCD glass panel, Coating of panel of the mobile phone or dispensing of the key,
Speaker dispensing, Dispensing seal of battery boxes
Coating of parts of vehicles and machines, Coating adhesion of hardware parts, Coating of rationed gas, liquid filling, Chip bonding, etc.
Applicable fluid: Silica gel, EMI conductive adhesive, UV glue, AB glue, fast dry
Glue, epoxy adhesive, sealant, hot glue, grease, silver glue, red glue, solder paste,
Cooling paste, prevent solder paste, transparent lacquer, screw fixation agent, etc.
Main use: The product in the process of bonding, infusion, coating, sealing, filling,
Drop, linear/arc/round glue, etc. Dispense in point, line, surface, arc, circle and
Irregular curve and triaxial linkage function is available etc.
Specifications
Item Y&D5400-2Y
X/Y/Z working area (mm): 500/300/300/100
Load worktable: 11.0kg/5.0kg
Speed PTP X&Y/Z (mm/sec)0.1~800/500
Repeatability: +/- 0.01mm / axis
Resolution: 0.01mm/axis
Data memory: 100 programs, 4000 points/program
Data storage: CF card/pc Storage & USB
Display: Teach pendant LCD
Operation system: PTP (point to point) & CP (continuous path)
Interpolation linear/circular: 4 axis
Teaching method: Teach pendant
I/O signals: 8 inputs / 8 outputs
External interface: RS232
Power supply: AC 90~260V 320W
Operating temperature: 0~40 C
Motor system: Micro stepping motor
If you have any interest and questions about us and our products,
Pls feel free to let me know, I promise to give you the quickest reply as soon as I got it.
PP flexible needle with corrosion resistance characteristics, the flexibility of the needle tube is good and easy to extend into the complex working face, which is mainly to prevent the scratches on the surface of the production.There are various sizes of the glue outlet (0.26mm-1.36mm). Users can choose suitable needles according to their actual needs.
Y&D7400N full automatic dispensing robot which operate by the teach pendant, all the axis can do straight line or arc dispensing.. It can be working with all kinds of liquid, like adhesive, silicone, UV glue, conformal coating. Also it can be collocate with other kinds of equipment to use, such as automatic pickup device which set up by the system. The machine have a interpolation function which is quite sturdy and durable to use, it can work in a wide range.
Item Y&D7400N
X/Y/Z working area (mm) 400/400/100
Load worktable 11.0kg / 6.0kg
Speed PTP X&Y/Z (mm/sec) 800/350
Repeatability +/- 0.01mm / axis
Resolution 0.01mm/axis
Data memory 100 programs, 4000 points/program
Data storage CF card
Program Display Teach pendant LCD
Epoxy Resin Automatic Precision Dispenser with Controller for Plastic Adhesive
Detail information
Y&D5200 is a new designed three axis dispenser robot with X/Y/Z axis,
Its workingrange of X/Y/Z axis is 200mm/150mm/50mm. This machine is
Made of the main robot, a motion control system, a dispenser controller, a
Teach pendant and some other accessories. It can be used in a wide range
Such as Automobile mechanical parts coating, cell phone buttons dispening,
Mobile phone battery packaging, laptop battery packaging, coil dispensing,
PCB bond fixed sealant, IC sealant, horn external punctuate glue, PDA sealant,
Etc. It is programming by the teach pendant which is easy to operate that user
Can learnt it in a few minutes. Once users make a program it can stored for next
Time use. The program dates are stored in the CF card ( it can store at least 100
Groups of programms, 4000 points/group )
This kind of dispensing robot arm is compact in size and economical in cost that can meet mang customers' requirements. Y&D5200 has powerful function which can be used online. With aluminium construction, it has shockproof function. You should know that no matter how heavy or hight your products are, it all can be used for they will be put on the plate but not put on the machine straightly.
Notice
All the quotations we offer to you are all without the plate's price. But if you need, we also can supply it to you, just need add the price into the quotation. On the other hand, the high of the tripod of the plate can be changed according to the hight of your products.
Specifications
Mode Y&D5200
Working Range ( X/Y/Z mm ) 200 / 150 / 50 mm
Max Load: Z Axis 3kg
Speed X&Y/Z Axis ( mm/sec ) 0.1~500 / 350
Resolition 0.02mm / Axis
Repetitive Positioning Accuracy 0.02mm/Axis
Program Capacity Min 100 groups, 4000 points / group
Date Storage Type CF Card
Motor System Micro Stepping Motor
Control Method PTP & CP
Interpolation Function 3 Axis
I/O Signals Port 8 Input / 8 Output
Program Display LCD
Programming Method Teach Pendant
Power Supply AC90 260V 320W
Working Temperature 0~40 C
Working Relative Humidity 20~90% no condensation
Dimensions ( L W H mm ) 485 380 475
Robot Weight 23kg ( Exclude the bottom plate )
CE Approved Industrial Liquid Equipment for LCD
Detail information
A new designed three axis dispenser robot with X/Y/Z axis,
Its workingrange of X/Y/Z axis is 200mm/150mm/50mm. This machine is
Made of the main robot, a motion control system, a dispenser controller, a
Teach pendant and some other accessories. It can be used in a wide range
Such as Automobile mechanical parts coating, cell phone buttons dispening,
Mobile phone battery packaging, laptop battery packaging, coil dispensing,
PCB bond fixed sealant, IC sealant, horn external punctuate glue, PDA sealant,
Etc. It is programming by the teach pendant which is easy to operate that user
Can learnt it in a few minutes. Once users make a program it can stored for next
Time use. The program dates are stored in the CF card ( it can store at least 100
Groups of programms, 4000 points/group )
This kind of dispensing robot arm is compact in size and economical in cost that can meet mang customers' requirements. Y&D5200 has powerful function which can be used online. With aluminium construction, it has shockproof function. You should know that no matter how heavy or hight your products are, it all can be used for they will be put on the plate but not put on the machine straightly.
Notice
All the quotations we offer to you are all without the plate's price. But if you need, we also can supply it to you, just need add the price into the quotation. On the other hand, the high of the tripod of the plate can be changed according to the hight of your products.
Specifications
Item Y&D5200
Item Y&D5200 Y&D5300
X/Y/Z working area (mm) 200/150/50 300/ 200/ 50
Load worktable 3.0kg
Speed PTP X&Y/Z (mm/sec) 0.1~500/350
Repeatability 0.02mm / axis
Resolution 0.02mm/axis
Data memory 100 programs, 4000 points/program
Data storage CF card
Program Display Teach pendant LCD
Operation system PTP (point to point) & CP (continuous path)
Interpolation linear/circular 3 axis
Program method Teach pendant
I/O signals 8 inputs / 8 outputs
Power supply AC 90
Widely Collocate Easy Programming Hysol Filling Machine with Tank
Three axis designed Y&D 7500N dispensing robot arm is the largest type in the 7000 series dispensing robot arm with a working range of X/Y/Z axis of 500 500 100mm. It is a very popular type of dispenser in electronic products. This kind of dispensing robot arm is compact in size and economic in price which have the function of interpolation. All the axis cof this kind of dispensing robot arm can do dispensing as make points, draw lines, arc, etc. It is operate by the teach pendent which is very easy to operate and users can learn it quickly and make programs in a few minutes. The program dates can be stored in the CF Card in the machine for next time use for which dispensing the similar products. It ca4000 points in each grup). Y&D 7500N is really quite useful in a wide range, such as
Semiconductor packaging, Fixing and protection of PCB electronic
Omponents, Packaging adhesion of LCD glass panel, Coating of panel of the mobile phone or dispensing of the key,
Speaker dispensing, Dispensing seal of battery boxes
Coating of parts of vehicles and machines, Coating adhesion of hardware parts, Coating of rationed gas, liquid filling, Chip bonding, etc.
Applicable fluid: Silica gel, EMI conductive adhesive, UV glue, AB glue, fast dry
Glue, epoxy adhesive, sealant, hot glue, grease, silver glue, red glue, solder paste,
Cooling paste, prevent solder paste, transparent lacquer, screw fixation agent, etc.
Main use: The product in the process of bonding, infusion, coating, sealing, filling,
Drop, linear/arc/round glue, etc. Dispense in point, line, surface, arc, circle and
Irregular curve and triaxial linkage function is available etc.
Specifications
Item Y&D7500N
X/Y/Z working area (mm) 500/500/100
Load worktable10.0kg/5.0kg
Speed PTP X&Y/Z (mm/sec)0.1~800/500
Repeatability 0.01mm / axis
Resolution0.01mm/axis
Data memory100 programs, 4000 points/program
Data storageCF card/pc Storage & USB
DisplayTeach pendant LCD
Operation systemPTP (point to point) & CP (continuous path)
Interpolation linear/circular 3 axis
Teaching methodTeach pendant
I/O signals8 inputs / 8 outputs
External interfaceRS232
Power supplyC 90~260V 320W
Operating temperature0~40 C
Motor systemMicro stepping motor
Dimensions685 670 660
Weight41kg
Y&D7300N-W AB double liquid automatic dispensing machine uses volume metering technology to push the glue out of the container at a uniform speed. When pushing the glue, the pressure is stable and the speed is uniform. The hardware adopts the glue pushing mode of servo motor + reducer and TBI precision screw. The glue discharging precision is high, and the repetition precision can reach plus or minus 0.01. It is suitable for 50ml 1:1, 2:1, 4:1, 5:1, 10:1, 400ml 1:1, 2: 1. Double liquid structural adhesive.
Item Y&D7300N-W Y&D7400N-W
A kind of gantry conveyor dispensing robot arm which is designed with ball screw and servo motor, in this way can guarantee the Closed-loop operation. This kind of dispensing robot arm is compact in size and economical in cost that can meet mang customers' requirements. has powerful function which can be used online. With aluminium construction, it has shockproof function. You should know that no matter how heavy or hight your products are, it all can be used for they will be put on the plate but not put on the machine straightly.
Notice
All the quotations we offer to you are all without the plate's price. But if you need, we also can supply it to you, just need add the price into the quotation. On the other hand, the high of the tripod of the plate can be changed according to the hight of your products.
series dispensing robot is really quite useful in a wide range, such as
Semiconductor packaging, Fixing and protection of PCB electronic Omponents, Packaging adhesion of LCD glass panel, Coating of panel of the mobile phone or dispensing of the key, Speaker dispensing, Dispensing seal of battery boxes Coating of parts of vehicles and machines, Coating adhesion of hardware parts, Coating of rationed gas, liquid filling, Chip bonding, etc.
Applicable fluid: Silica gel, EMI conductive adhesive, UV glue, AB glue, fast dry Glue, epoxy adhesive, sealant, hot glue, grease, silver glue, red glue, solder paste, Cooling paste, prevent solder paste, transparent lacquer, screw fixation agent, etc.
Main use: The product in the process of bonding, infusion, coating, sealing, filling, Drop, linear/arc/round glue, etc. Dispense in point, line, surface, arc, circle and Irregular curve and triaxial linkage function is available etc.
Specifications
Model Y&D9400
OEM Service YES
Certificate CE Approved
Program Display Teach Pendant LCD
Programming Method Teach Pendant
Power Supply AC90~260V 320W
Working Relative Humidity 20~80% no condensation
Load Y Axis / Z Axis 8kg
X&Y/Z(mm/sec) 800/320
Resolution 0.01mm / Axis
Repetitive Positioning Accuracy 0.01mm/Axis
Program Capacity Min 100 group, 4000 points/group
Data Storage Type CF Card , PC Storage&USB
Motor System Servo motor
Control Method PTP&CP
Interpolation Function 3 Axis (suit for 3D requirement)
I/O Signals Port 8 Inputs / 8 Outputs
External Control Interface RS232
Liquid Filling Automatic Precision Double Platform Dispenser for Electronic Product
As the machine designed by double table structure, its most outstanding function is that it can cycle operation, save time of take and put material, improve production efficiency. With point, line, face, arc, circle, and irregular curve continuous interpolation and four axes linkage, and other functions.
Four axis designed Y&D 5400-2Y dispensing robot arm is a newly designed dispensing robot arm with a working range of X/Y/Z axis of 500 300 300 100mm. It is a very popular type of dispenser in electronic products. This kind of dispensing robot arm is compact in size and economic in price which have the function of interpolation. All the axis cof this kind of dispensing robot arm can do dispensing as make points, draw lines, arc, etc. It is operate by the teach pendent which is very easy to operate and users can learn it quickly and make programs in a few minutes. The program dates can be stored in the CF Card in the machine for next time use for which dispensing the similar products. It ca4000 points in each grup). Y&D 7500N is really quite useful in a wide range, such as
Semiconductor packaging, Fixing and protection of PCB electronic
Omponents, Packaging adhesion of LCD glass panel, Coating of panel of the mobile phone or dispensing of the key,
Speaker dispensing, Dispensing seal of battery boxes
Coating of parts of vehicles and machines, Coating adhesion of hardware parts, Coating of rationed gas, liquid filling, Chip bonding, etc.
Applicable fluid: Silica gel, EMI conductive adhesive, UV glue, AB glue, fast dry
Glue, epoxy adhesive, sealant, hot glue, grease, silver glue, red glue, solder paste,
Cooling paste, prevent solder paste, transparent lacquer, screw fixation agent, etc.
Main use: The product in the process of bonding, infusion, coating, sealing, filling,
Drop, linear/arc/round glue, etc. Dispense in point, line, surface, arc, circle and
Irregular curve and triaxial linkage function is available etc.
Specifications
Item Y&D5400-2Y
X/Y/Z working area (mm): 500/300/300/100
Load worktable: 11.0kg/5.0kg
Speed PTP X&Y/Z (mm/sec)0.1~800/500
Repeatability: 0.01mm / axis
Resolution: 0.01mm/axis
Data memory: 100 programs, 4000 points/program
Data storage: CF card/pc Storage & USB
Display: Teach pendant LCD
Operation system: PTP (point to point) & CP (continuous path)
Interpolation linear/circular: 4 axis
Teaching method: Teach pendant
I/O signals: 8 inputs / 8 outputs
External interface: RS232
Power supply: AC 90~260V 320W
Operating temperature: 0~40 c
Motor system: Micro stepping motor
High Perfermance Dow Corning Equipment for Amplifier In Dongguan
Model Y&D7300R dispensing robot arm is our most popular industrial robot with a dispensing area of 300mm x 300mm x 100mm. The Y&D7300R Cartesian
Robot represents a substantial cost saving in comparison to similar desktop robots.
Y&D7300R is a kind of four axis dispensing robot for automatic dispensing of adhesive, liquid gaskets, resins and UV materials. Four axis and four-linkage running R-axis: 360 Rotary.
Compared with similar dispensing robot arm, this kind of dispensing robot solved the trouble with four space trajectory dispensing in the workpiece as like the outer wall, vertical, or within the gap dispensing line or
Circles. Dot.
Item Y&D7400R
X/Y/Z working area (mm) 400/400/100
Load worktable10.0kg/2.0kg
Speed PTP X&Y/Z (mm/sec)0.1~800/320
Y&D800 peristaltic dispensing machine is suitable for quantitatively spitting out various low viscosity materials (such as instant adhesive, anaerobic sealing agent, electrolyte, ink, etc.); The rotating part uses rolling contact to reduce the friction resistance, so it improves the quantification and prolongs the service life of the hose.
Performance Parameters:
Size(mm) 184L*190W*94H
Weight 3.5kg
Rolling/Back Rolling 1-999�°
Voltage 110/220VAC, 50/60HZ
Speed 0-160RPM
Time/gelatinize 1-999
Min Dot 0.0001cc(0.2x¸0.7 operation)
Liquid density Under 10000cps
Standard CE Approved Yes
Features and Advantages:
1. Application for dispensing the liquid in lowness density(such as: instant adhesive, Electolyte, printing ink ect.
2. Turn on power and for usage without the air - pressure
3. Using the function on Rolling - contact for circumvolve to reduce the resistance, and progress the timer and prolong the usage of dispensing barrel.
4.1year function warranty
Application:
It is suitable for the precise dispensing process requirements of products with small amount of glue, and is controlled by manual switch. It can be equipped with Yiren three-axis dispensing machine. Liquid with viscosity below 10000 CPS is used for bonding, fixing, dot coating, linear coating, etc.
Common glue packaging: small bottle, small can, etc.
Equipment Summary and features
Can Use for 5 Gallon(20kg) Barrel packaging Iron and plastic barrels
Suitable for 10,000-1,000,000cps high viscosity liquid
Equipped with high pressure special valve to realize high viscosity liquid precision dispensing and
greatly improve production and glue quality
Use the liquid within one month after the packing is opened
Motor power:400W
Rotor diplacement: 1.5/3/6cc Maximum delivery pressure: 80 kg
Repeated precision: +- 2% Maximum glue dispensing volume: 5ml/sec
Rated voltage: AC 220V Minimum glue dispensing amount: 0.005ml/sec
Rated frequency: 50HZ
Rated power: 500W
Rated pressure:0.6MPA
PMP-20 screw pumps are suitable for low, medium high viscosity or abrasive liquids such as silica gel, epoxy, grease, heat conducting gel, UV, etc.
The 5 gallon / 20L barrel is used, and the pressure plate sealing method is adopted to facilitate the use and replacement of glue. The stator and rotor are driven by the servo motor to ensure the realization of precision measurement, and solve the problems of glue breaking, unstable glue amount and uneven lines caused by the unstable pulse and air pressure of the traditional pneumatic piston pump.
The servo screw mode can be used in all dispensing processes such as bonding, fixing, potting, bottom filling, plane sealing or double liquid dispensing
Solve the problems of unstable pressure in pneumatic glue supply and transportation mode and unstable pressure caused by the change of rubber barrel affected by resistance, which affects the repeated accuracy of dispensing
Solve the pulse instability caused by pneumatic or cylinder and piston rubber supply and transportation
The equipment is equipped with a special servo drive controller with its own touch screen. Adjust the glue amount through the working speed function item. The larger the value is, the larger the glue amount is (the minimum is 0.005ml, the maximum is 5ml / sec, and the size can be customized)
V62 quick drying dispensing valve is an anaerobic single acting dispensing valve with one-way drive and thimble structure. It is suitable for the production of speakers and loudspeaker boxes, mechanical hole seam sealing, capacitor and module filling, dispensing of circuit board, canned beverage and liquid medicine, drip and coating with anaerobic adhesive, etc.
Rapid and accurate action, maintain superior fluid glue breaking function, and simply control the precise flow of liquid.
Feature:
1.Common barrier planning is selected to effectively isolate the fluid tank and rubber valve starting parts, so as to finely control the medium and low density fluid flow.
2.The echo time of the barrier valve can reach 15ms, and the glue breaking is clean and agile without dripping and leakage.
3.The fluid tank and diaphragm are made of polymer plastic materials. The polymer fluid tank can be used for various commonly used fluids such as solvent, instant drying glue, anaerobic glue and flux.
4.The black fluid tank can completely shield the light, making the UV dispensing operation safer.
5.The glue quantity is continuously adjustable, easy to clean and low protection.
Parameters:
Model V62
Flow groove Yellow UHMW
Needle adapter Clear PP
Cylinder body SUS 303 Stainless
Dimension 26.9*79.0mm
Weight 154g
Diaphragm Yellow UHMW
Mounting port M5
Driving pressure 0.4-0.62 MPa
Max fluid pressure 0.48 MPa
1.Suitable for: low viscosity liquid,such as anaerobic adhesive,Quick-drying glue, solvent,adhesive,UV glue, epoxy resin,etc.
2.It can be connected with various needle nozzles, and can be connected with feed pump or storage pressure barrel.
3.Small size and light weight.
V51 Firing pin valve is suitable for ultra micro dispensing precision striker valve. TE needle with inner diameter of 0.41 ~ 0.10mm can be used for high-precision ultra micro dispensing of various liquids.
Feature:
1. Precision of ultra micro dispensing
2. Dispensing quantity adjust easily
3. Excellent function of clean in interrupt glue
characteristic:
1. Ultra micro precision dispensing
2. Simple adjustment of dispensing amount
3. No bubbles in dispensing
4. Superior glue breaking function
Parameters:
Model V51
Cylinder body SUS303
Flow groove SUS303
Dimension 26.9 x 130mm Length
Weight 320g
Firing Pin seat SUS303
Liquid supply port 1/8NPT
V-ring PTFE/SUS303
Driving pressure 0.4-0.62MPa
Max fluid pressure 0.7MPa
Mounting hole M6
Needle diameter 22G(ID (0.14)-33g( ID 0.1)
Suitable for: low and high viscosity liquids, such as UV glue, solvent, lubricant, epoxy resin, etc.
Precision, burr-free passivated stainless steel chamfered tips for easy positioning between delicated surface.
Specifications
1. Puncture Instrument
2. Injection
3. High precision dispensing
4. Various colors
Applicable fluid:
Silica gel, EMI conductive adhesive, UV glue, AB glue, fast
Dry glue, epoxy adhesive, sealant, hot glue, grease, silver
Glue, red glue, solder paste, cooling paste, prevent solder
Paste, transparent lacquer, screw fixation agent, etc.
Application Ranges:
Automobile mechanical parts coating, cell phone buttons
Point glue, mobile phone battery packaging, laptop battery
Package, the coil point glue, PCB bond fixed sealant, IC
Sealant, horn external punctuate glue, PDA sealant, LCD
Sealant, IC packaging, IC bonding, casing bonding, optical
Device processing, mechanical seal, etc.
Color Gauge Part No. ID size OD size
1/ 4"Length 5/16"Length 1/2"Length 1"Length (mm) (mm)
Olive 14G TE714025 TE714031 TE714050 TE714100 1.55 1.83
Amber 15G TE715025 TE715031 TE715050 TE715100 1.36 1.65
Green 18G TE718025 TE718031 TE718050 TE718100 0.84 1.27
Pink 20G TE720025 TE720031 TE720050 TE720100 0.6 0.91
Purple 21G TE721025 TE721031 TE721050 TE721100 0.51 0.82
Blue 22G TE722025 TE722031 TE722050 TE722100 0.41 0.72
Orange 23G TE723025 TE723031 TE723050 TE723100 0.34 0.64
Red 25G TE725025 TE725031 TE725050 TE725100 0.26 0.51
Clear 27G TE727025 TE727031 TE727050 TE727100 0.21 0.41
Lavender 30G TE730025 TE730031 TE730050 TE730100 0.16 0.31
Yellow 32G TE732025 TE732031 -- -- 0.11 0.23
Cyan 34G TE734025 TE734031 -- -- 0.06 0.19
Minimum order quantity :1000PCS
Payment method: T/T, Western Union
transaction mode: FOB
Y&D7300R four-axle bench type mechanical arm can be operated through the instruction box with motion tending function. All shafts can be dispensed with glue in a straight line or arc. The machine contains 4 axes, R axis can rotate 360 degrees of dispensing. The machine software is powerful, easy to use, the program can be easily set up, the operation can be completed in a few minutes.
Item Y&D7300R
Working Area: X/Y/Z mm 300/300/100/360
Max Load Y/R Axis 11.0kg / 2.0kg
Speed X&Y/Z (mm/sec) 0.1~800/320
Repetitive Positioning Accuracy +/- 0.02mm / axis
Program Capacity At least 100 groups, 4000 points / group
Date Storage Type CF Card
Program Display LCD
Control Method PTP & CP
Interpolation Function 4 Axis
Programming Method Teach Pendant
I/O Signal Port 8 Inputs / 8 Outputs
External Control Interface RS232
Y&D7500N bench-top robot is our most popular industrial robot with a dispensing area of 500mm X 500mm X 100mm. With specialized Teach Pendant /PC, Y&D 7300N dispensing robot systems are easy to program and quick to set up. Three-dimensional motion control allows easy programming of dots, stripes, arcs, and patterns on different planes. These capabilities enable our customers to tackle more complex projects that require precision fluid dispensing and placement, while increasing product quality and yield.
Features
1. Easy to program - Dedicated fluid dispensing software eliminates the need for complex robot language programming.
2. Programmable interface via teach pendant or PC.
3. Fully integrated positioning and fluid dispensing functions.
4. Suitable for many fluid dispensing applications.
5. Fast, highly accurate and produce more parts with less process time.
6. English handhold control box, easy use.
7. Set the glue amount, speed and time etc. Stable glue flow and no leaking.
Common application scope:
Automobile mechanical parts coating, cell phone buttons point glue, mobile phone battery packaging, laptop battery package, the coil point glue, PCB bond fixed sealant, IC sealant, horn external punctuate glue, PDA sealant, LCD sealant, IC packaging, IC bonding, casing bonding, optical device processing, mechanical seal, etc.
Applicable fluid:
Silica gel, EMI conductive adhesive, UV glue, AB glue, fast dry glue, epoxy adhesive, sealant, hot glue, grease, silver glue, red glue, solder paste, cooling paste, prevent solder paste, transparent lacquer, screw fixation agent, etc.
Main Application:
The product in the process of bonding, infusion, coating, sealing, filling, drop, linear/arc/round glue, etc. Dispense in point, line, surface, arc, circle and irregular curve and triaxial linkage function is available etc.
Item Y&D7500N
X/Y/Z working area (mm) 500/500/150
Load worktable 10.0kg/2.0kg
Speed PTP X&Y/Z (mm/sec) 0.1~800/500
Repeatability +/- 0.01mm / axis
Resolution 0.01mm/axis
Data memory 100 programs, 4000 points/program
Data storage CF card
Program Display Teach pendant LCD
Operation system PTP (point to point) & CP (continuous path)
Interpolation linear/circular 3 axis
Program method Teach pendant
I/O signals 8 inputs / 8 outputs
External interface RS232
Power supply AC 90~260V 320W (Y&D 7200N AC 90~260V 125W)
Operating temperature 0~40 C
Motor system Micro stepping motor
Dimensions 685*700*660
Net Weight 52kg
Y&D7200N full automatic dispensing robot is compact in size, sturdy and durable in using. When working, it can collocate with different valves, barrels, tips, etc. This kind of machine is applied to all kinds of automation which can be used in a worldwide area. Using industry leading software, it is quite easy to learn and operate through the teach pendant. Users can learn and make programs in a few minutes.
Item Y&D7200N
X/Y/Z  working area (mm) 200/200/50
Load worktable 5.0kg / 3.0kg
Speed PTP X&Y/Z� (mm/sec) 500/350
Repeatability +/- 0.02mm /axis
Resolution 0.01mm/axis
Data memory 100 programs, 4000 points/program
Data storage CF  card
Program� Displayï¼?Teach� pendant� LCD
Operation� systemï¼? PTP� (point� to� point)� &� CP� (continuous� path)
Interpolation linear/circular  axis
Program method Teach pendant
I/O signals inputs 8 outputs
External interface RS232
Power supply AC 90~260V 125W
Operating temperature 10C~40C
Working Rlative Humidity 20-90% no condensation
Motor  system Micro stepping motor
Dimensions 385*380*500
Net� Weight 23kg
The picture of Y&D 1100 is our standard machine. It can match with other Y&D accessories such as valve, tank, cartridge and so on. We can recommend our machine to you according to your request.It is suitable for all types of fluids, includes a suck-back feature to ensure low viscosity liquids do not drip.
Performance Parameters:
Size 215L*225D*90H
Weight 2.35kg
Air input 80~120Psi
Dispense time 0.001~99.99sec+/-0.1%
Voltage 110/220VAC
Standard CE Approved Yes
Features and Advantages:
1.Microprocessor-based control
2.Time digital display from 0.001~99.99
3.Cycle:0.05%
4.Unique TEACH function
5.Memory for time recorder
6.Liquid pressure adjustable 0~120PIS 0~8KG
7.1year function warranty
Y&D200 Mini Automatic Dispensing Robot is a popular model can be operated to dispense straight line or arc through the teach pendant under the powerful and simply software, it's easy to set up the program within a few minutes. It can be matched with Y&D dispensing equipment and accessories for accurate and complete gluing applications.
Item Y&D200
Y&D7300N dispensing robot is a kind of newly designed popular machine which is quite easy to learn and operate by the teach pendant. With the interpolation function, all the axis can make points, drawing lines, arcs, some complicated draws, etc. With the quite powerful software, the machine is quite easy to operate, one can learn and make program is a few minutes.
Item Y&D7300N
X/Y/Z working area (mm) 300/300/100
Load worktable 11.0kg / 6.0kg
Speed PTP X&Y/Z (mm/sec) 800/350
Repeatability +/- 0.02mm / axis
Resolution 0.01mm/axis
Data memory 100 programs, 4000 points/program
Data storage CF card
Program Display Teach pendant LCD
Operation system PTP (point to point) & CP(continuous path)
Interpolation Function 3 axis
Program method Teach pendant
I/O signals 8 inputs / 8 outputs
External interface RS232
Power supply AC 100-230V,300W
Working Rlative Humidity 20-90% no condensation
Operating temperature 10C~40C
Motor system Micro stepping motor
Dimensions 485*505*610
Net� Weight 34kg
Functions and Features:
1.The barrel body and lid are made of stainless steel so that not prone to react with chemical substances and not eas to deform.
2.Surface polishing, good sealing, applied to general liquid.
3.Equipped with the safety valve of automatic presssure relief device, high-pressure resistance.
4.When using, you can directly put the original package of glue into the barrel, and no need to clean after using, easy to maintain.
5.If you demand other specifications, please consult us in advance.
The following are general specifications for reference; Can be customized according to requirements:
Volumn Weight O.D I.D Hight Deep Thickness Thickness of Pressure Matrial
Inside the cap
(L) (kg) (mm) (mm) (mm) (mm) (mm) (mm) (bar)
1L 3.5 108 102 140 125 3 12 7 Stainless steel/Carbon
2L 4.5 133 127 180 165 3 12 8 Stainless steel/Carbon
3L 6 133 127 255 240 3 12 8 Stainless steel/Carbon
4L 7 159 152 245 230 3.5 12 8 Stainless steel/Carbon
5L 8 159 152 300 285 3.5 12 8 Stainless steel/Carbon
8L 16 219 210 250 235 4.5 12 8 Stainless steel/Carbon
10L 17 219 210 310 290 4.5 12 8 Stainless steel/Carbon
15L 19 219 210 450 435 4.5 12 8 Stainless steel/Carbon
20L 30 273 262 400 385 5.5 14 8 Stainless steel/Carbon
25L 33 273 262 490 470 5.5 14 8 Stainless steel/Carbon
30L 43 325 314 420 400 5.5 14 8 Stainless steel/Carbon
40L 46 325 314 540 520 5.5 14 8 Stainless steel/Carbon
60L 60 376 365 600 580 5.5 16 8 Stainless steel/Carbon
80L 89 425 410 620 600 7.5 16 8 Stainless steel/Carbon
100L 100 425 409 790 770 7.5 16 8 Stainless steel/Carbon
Y&D860 Precision Dispenser system can be widely used in electronics industry, viation, automobile, food, medicine, chemistry, cosmetic, packing, craftwork industry and etc. Such as dotting, sealing, coating or potting fluid materials. Dispenser can dispensing a very small volume to many large volume of watery low viscosity liquids to very high viscosity materials like pastes or grease. Nowadays the areas of new dispensing applications have been very expanding more and more.
Performance Parameters:
Size 339L*229D*83H
Weight 3.5kg
Dispense time 0.001~99.99sec+/-0.1%
Voltage 110/220VAC
Power consumption 135W
Temperature Setting range 1-200
Temperature Control Circuit PID Control
Temperature Sensor Platinum resistance to measure temperature
Standard CE Approved Yes
Features and Advantages:
1.Microprocessor-based control
2.Time digital display from 0.001~99.99
3.Cycle:0.05%
4.Liquid pressure adjustable 0~120PIS 0~8KG
5.1year function warranty
It is mainly applicable to the temperature sensitive electronic components in the SMT post soldering process, and the post soldering process of components that cannot pass through the reflow welder due to heat sensitivity. It is generally used for PCB welding of various plug-ins, aiming at the welding of PCB solder joints with scattered distribution and changeable direction; The welding gun has the function of 360 degree rotation and 45 degree angle welding. It is an automatic soldering machine with a wide range of uses. The company's automatic soldering machine has a variety of soldering methods, and all process parameters can be set by customers to adapt to various difficult soldering operations and micro soldering processes, which can effectively improve the quality of soldering process and easily realize soldering automation.
Product parameters:
Item Y&D7300SR Y&D7400SR Y&D7500SR
X/Y/Z working area (mm) 300/300/100/360 400/400/100/360° 500/500/100/360
Max Load Y/ZÂ Axis 5.0kg / 8.0kg
Speed X&Y/ZÂ (mm/sec) 0.1~600mm/sec
Repeatability Positioning Accutacy +/- 0.02mm / axis
Heating power 150-300W
Data� memory Min 100 programs, 4000 points/program
Heating temperature range 0C~550C
Operation system
